Re: [PATCH v3 05/14] dt-bindings: backlight: Add Mediatek MT6370 backlight

From: Joe Simmons-Talbott
Date: Thu Jun 23 2022 - 09:17:09 EST


On Thu, Jun 23, 2022 at 07:56:22PM +0800, ChiaEn Wu wrote:
> From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
>
> Add mt6370 backlight binding documentation.
>
> Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> ---
>
> v3
> - Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
> "mediatek,bled-pwm-hys-input-th-steps"
> - Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
> "bled-ocp-microamp" enum values
> ---
> .../leds/backlight/mediatek,mt6370-backlight.yaml | 92 ++++++++++++++++++++++
> 1 file changed, 92 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> new file mode 100644
> index 0000000..26563ae
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT6370 Backlight
> +
> +maintainers:
> + - ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
> +
> +description: |
> + This module is part of the MT6370 MFD device.
> + The MT6370 Backlight WLED driver supports up to a 29V output voltage for
> + 4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
> + capability with 2048 current steps (11 bits) in exponential or linear
> + mapping curves.
> +
> +allOf:
> + - $ref: common.yaml#
> +
> +properties:
> + compatible:
> + const: mediatek,mt6370-backlight
> +
> + default-brightness:
> + minimum: 0
> + maximum: 2048
> +
> + max-brightness:
> + minimum: 0
> + maximum: 2048
> +
> + enable-gpios:
> + description: External backlight 'enable' pin
> + maxItems: 1
> +
> + mediatek,bled-pwm-enable:
> + description: |
> + Enable external PWM input for backlight dimming
> + type: boolean
> +
> + mediatek,bled-pwm-hys-enable:
> + description: |
> + Enable the backlight input-hysteresis for PWM mode
> + type: boolean
> +
> + mediatek,bled-pwm-hys-input-th-steps:
> + $ref: /schemas/types.yaml#/definitions/uint8
> + enum: [1, 4, 16, 64]
> + description: |
> + The selection of the upper and lower bounds threshold of backlight
> + PWM resolution. If we choose selection 64, the variation of PWM
> + resolution needs over than 64 steps.

more than?

Thanks,
Joe

> +
> + mediatek,bled-ovp-shutdown:
> + description: |
> + Enable the backlight shutdown when OVP level triggered
> + type: boolean
> +
> + mediatek,bled-ovp-microvolt:
> + enum: [17000000, 21000000, 25000000, 29000000]
> + description: |
> + Backlight OVP level selection.
> +
> + mediatek,bled-ocp-shutdown:
> + description: |
> + Enable the backlight shutdown when OCP level triggerred.
> + type: boolean
> +
> + mediatek,bled-ocp-microamp:
> + enum: [900000, 1200000, 1500000, 1800000]
> + description: |
> + Backlight OC level selection.
> +
> + mediatek,bled-channel-use:
> + $ref: /schemas/types.yaml#/definitions/uint8
> + description: |
> + Backlight LED channel to be used.
> + Each bit mapping to:
> + - 0: CH4
> + - 1: CH3
> + - 2: CH2
> + - 3: CH1
> + minimum: 1
> + maximum: 15
> +
> +required:
> + - compatible
> + - mediatek,bled-channel-use
> +
> +additionalProperties: false
> --
> 2.7.4
>