Re: [PATCH v2 1/9] PM: domains: Delete usage of driver_deferred_probe_check_state()

From: Tony Lindgren
Date: Thu Jun 23 2022 - 03:01:56 EST


* Saravana Kannan <saravanak@xxxxxxxxxx> [220622 19:05]:
> On Tue, Jun 21, 2022 at 9:59 PM Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> >
> > Hi,
> >
> > * Saravana Kannan <saravanak@xxxxxxxxxx> [220621 19:29]:
> > > On Tue, Jun 21, 2022 at 12:28 AM Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> > > >
> > > > Hi,
> > > >
> > > > * Saravana Kannan <saravanak@xxxxxxxxxx> [700101 02:00]:
> > > > > Now that fw_devlink=on by default and fw_devlink supports
> > > > > "power-domains" property, the execution will never get to the point
> > > > > where driver_deferred_probe_check_state() is called before the supplier
> > > > > has probed successfully or before deferred probe timeout has expired.
> > > > >
> > > > > So, delete the call and replace it with -ENODEV.
> > > >
> > > > Looks like this causes omaps to not boot in Linux next.
> > >
> > > Can you please point me to an example DTS I could use for debugging
> > > this? I'm assuming you are leaving fw_devlink=on and not turning it
> > > off or putting it in permissive mode.
> >
> > Sure, this seems to happen at least with simple-pm-bus as the top
> > level interconnect with a configured power-domains property:
> >
> > $ git grep -A10 "ocp {" arch/arm/boot/dts/*.dtsi | grep -B3 -A4 simple-pm-bus
>
> Thanks for the example. I generally start looking from dts (not dtsi)
> files in case there are some DT property override/additions after the
> dtsi files are included in the dts file. But I'll assume for now
> that's not the case. If there's a specific dts file for a board I can
> look from that'd be helpful to rule out those kinds of issues.
>
> For now, I looked at arch/arm/boot/dts/omap4.dtsi.

OK it should be very similar for all the affected SoCs.

> > This issue is no directly related fw_devlink. It is a side effect of
> > removing driver_deferred_probe_check_state(). We no longer return
> > -EPROBE_DEFER at the end of driver_deferred_probe_check_state().
>
> Yes, I understand the issue. But driver_deferred_probe_check_state()
> was deleted because fw_devlink=on should have short circuited the
> probe attempt with an -EPROBE_DEFER before reaching the bus/driver
> probe function and hitting this -ENOENT failure. That's why I was
> asking the other questions.

OK. So where is the -EPROBE_DEFER supposed to happen without
driver_deferred_probe_check_state() then?

> > > > On platform_probe() genpd_get_from_provider() returns
> > > > -ENOENT.
> > >
> > > This error is with the series I assume?
> >
> > On the first probe genpd_get_from_provider() will return -ENOENT in
> > both cases. The list is empty on the first probe and there are no
> > genpd providers at this point.
> >
> > Earlier with driver_deferred_probe_check_state(), the initial -ENOENT
> > ends up getting changed to -EPROBE_DEFER at the end of
> > driver_deferred_probe_check_state(), we are now missing that.
>
> Right, I was aware -ENOENT would be returned if we got this far. But
> the point of this series is that you shouldn't have gotten that far
> before your pm domain device is ready. Hence my questions from the
> earlier reply.

OK

> Can I get answers to rest of my questions in the first reply please?
> That should help us figure out why fw_devlink let us get this far.
> Summarize them here to make it easy:
> * Are you running with fw_devlink=on?

Yes with the default with no specific kernel params so looks like
FW_DEVLINK_FLAGS_ON.

> * Is the"ti,omap4-prm-inst"/"ti,omap-prm-inst" built-in in this case?

Yes

> * If it's not built-in, can you please try deferred_probe_timeout=0
> and deferred_probe_timeout=30 and see if either one of them help?

It's built in so I did not try these.

> * Can I get the output of "ls -d supplier:*" and "cat
> supplier:*/status" output from the sysfs dir for the ocp device
> without this series where it boots properly.

Hmm so I'm not seeing any supplier for the top level ocp device in
the booting case without your patches. I see the suppliers for the
ocp child device instances only.

Without your patches I see simple-pm-bus probe initially with
EPROBE_DEFER like I described earlier, and then simple-pm-bus probes
on the second try.

Regards,

Tony