Re: [PATCH v9 4/5] arm64: dts: qcom: sc7180: Add pazquel dts files

From: Doug Anderson
Date: Wed Jun 22 2022 - 16:57:34 EST


Hi,

On Mon, Jun 20, 2022 at 10:35 PM Joseph S. Barrera III
<joebar@xxxxxxxxxxxx> wrote:
>
> Pazquel is a trogdor-based board. These dts files are unchanged copies
> from the downstream Chrome OS 5.4 kernel.
>
> Signed-off-by: Joseph S. Barrera III <joebar@xxxxxxxxxxxx>
> ---
>
> Changes in v9:
> - Restore two lines accidentally removed from ap_sar_sensor.
> - Simplify trackpad enabling (51d30402be75).
>
> Changes in v7:
> - Only include sc7180.dtsi in sc7180-trogdor.dtsi (19794489fa24).
> - Simplify spi0/spi6 labeling (d277cab7afc7).
> - Remove #include of <arm/cros-ec-keyboard.dtsi>.
> - Accidentally removed two lines from ap_sar_sensor.
>
> Changes in v6:
> - Copy changes to ap_sar_sensor from v5.4.
> - Add #include of <arm/cros-ec-keyboard.dtsi>.
>
> Changes in v4:
> - Fix description (no downstream bits removed).
> - Add missing version history.
>
> Changes in v3:
> - First inclusion in series.
>
> arch/arm64/boot/dts/qcom/Makefile | 4 +
> .../sc7180-trogdor-pazquel-lte-parade.dts | 22 ++
> .../qcom/sc7180-trogdor-pazquel-lte-ti.dts | 22 ++
> .../qcom/sc7180-trogdor-pazquel-parade.dts | 17 ++
> .../dts/qcom/sc7180-trogdor-pazquel-ti.dts | 17 ++
> .../boot/dts/qcom/sc7180-trogdor-pazquel.dtsi | 221 ++++++++++++++++++
> 6 files changed, 303 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 5cfd6316768c..dc26704dfe34 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -79,6 +79,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-ti.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
> new file mode 100644
> index 000000000000..ecedab8d1662
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Pazquel board device tree source
> + *
> + * Copyright 2021 Google LLC.
> + */
> +
> +/dts-v1/;
> +
> +#include "sc7180.dtsi"

Repeating my comment from v8:

This is not good and was an important part of "Simplify!" sc7180.dtsi
should only be included by sc7180-trogdor.dtsi.


> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
> new file mode 100644
> index 000000000000..5485f50f89ad
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
> @@ -0,0 +1,221 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Pazquel board device tree source
> + *
> + * Copyright 2021 Google LLC.
> + */
> +
> +#include "sc7180-trogdor.dtsi"
> +
> +&ap_sar_sensor {
> + compatible = "semtech,sx9324";
> + semtech,ph0-pin = <1 3 3>;
> + semtech,ph1-pin = <3 1 3>;
> + semtech,ph2-pin = <1 3 3>;
> + semtech,ph3-pin = <0 0 0>;
> + semtech,ph01-resolution = <1024>;
> + semtech,ph23-resolution = <1024>;
> + semtech,startup-sensor = <1>;
> + semtech,ph01-proxraw-strength = <3>;
> + semtech,ph23-proxraw-strength = <1>;
> + semtech,avg-pos-strength = <128>;
> + semtech,input-analog-gain = <0>;
> + semtech,cs-idle-sleep = "gnd";
> +
> + /delete-property/ svdd-supply;
> + vdd-supply = <&pp1800_prox>;
> +};
> +
> +/delete-node/&trackpad;
> +&ap_tp_i2c {

You need status = "okay"; here since Stephen's "Simplify!" patch
series means that the i2c node itself is now disabled by default.


> + trackpad: trackpad@15 {
> + status = "okay";

You _don't_ need the status = "okay"; here.


-Doug