Re: [PATCH 1/1] can/esd_usb2: Added support for esd CAN-USB/3

From: Vincent MAILHOL
Date: Tue Jun 21 2022 - 05:08:53 EST


Hello Frank,

I added my comments but similar to what Marc said, I would also like
the renaming/formatting/comment fix to be done in a separate patch.
Right now, this creates a lot of "noise" and makes the patch hard to
review.

On Tue. 21 Jun 2022 at 16:16, Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> wrote:
> Hallo Frank,
>
> some comments inline. As said in my previous mail, please move the
> formatting and renaming changes into a separate patch.
>
> Can you create an entry in the MAINTAINERS file for the driver (separate
> patch, too)?
>
> On 20.06.2022 22:26:03, Frank Jungclaus wrote:
> > This patch adds support for the newly available esd CAN-USB/3.
> > ---
> > drivers/net/can/usb/esd_usb2.c | 647 ++++++++++++++++++++++++---------
> > 1 file changed, 467 insertions(+), 180 deletions(-)
> >
> > diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c

If you rename all the prefixes from usb2 to usb, I also suggest you to
rename the file from esd_usb2.c to esd_usb.c, the Kconfig symbol from
CAN_ESD_USB2 to CAN_ESD_USB and the module from esd_usb2.o to
esd_usb.o.

> > index 286daaaea0b8..062f3dd922d2 100644
> > --- a/drivers/net/can/usb/esd_usb2.c
> > +++ b/drivers/net/can/usb/esd_usb2.c
> > @@ -1,9 +1,11 @@
> > // SPDX-License-Identifier: GPL-2.0-only
> > /*
> > - * CAN driver for esd CAN-USB/2 and CAN-USB/Micro
> > + * CAN driver for esd CAN-USB/2, CAN-USB/3 and CAN-USB/Micro
> > *
> > - * Copyright (C) 2010-2012 Matthias Fuchs <matthias.fuchs@xxxxxx>, esd gmbh
> > + * Copyright (C) 2010- Matthias Fuchs , esd gmbh
> > + * Copyright (C) 2022- Frank Jungclaus <frank.jungclaus@xxxxxx>, esd gmbh
>
> The copyright with a starting year, a dash "-", and no end year looks
> unfamiliar.
>
> > */
> > +
> > #include <linux/signal.h>
> > #include <linux/slab.h>
> > #include <linux/module.h>
> > @@ -14,20 +16,25 @@
> > #include <linux/can/dev.h>
> > #include <linux/can/error.h>
> >
> > -MODULE_AUTHOR("Matthias Fuchs <matthias.fuchs@xxxxxx>");
> > -MODULE_DESCRIPTION("CAN driver for esd CAN-USB/2 and CAN-USB/Micro interfaces");
> > +MODULE_AUTHOR("Frank Jungclaus <frank.jungclaus@xxxxxx>");
> > +MODULE_DESCRIPTION("CAN driver for esd CAN-USB/2, CAN-USB/3 and CAN-USB/Micro interfaces");
> > MODULE_LICENSE("GPL v2");
>
> Why have you removed the former author?
>
> > -/* Define these values to match your devices */
> > +/* USB vendor and product ID */
> > #define USB_ESDGMBH_VENDOR_ID 0x0ab4
> > #define USB_CANUSB2_PRODUCT_ID 0x0010
> > #define USB_CANUSBM_PRODUCT_ID 0x0011
> > +#define USB_CANUSB3_PRODUCT_ID 0x0014
> >
> > +/* CAN controller clock frequencies */
> > #define ESD_USB2_CAN_CLOCK 60000000
> > #define ESD_USBM_CAN_CLOCK 36000000
> > -#define ESD_USB2_MAX_NETS 2
> > +#define ESD_USB3_CAN_CLOCK 80000000
> > +
> > +/* Maximum number of CAN nets */
> > +#define ESD_USB_MAX_NETS 2
> >
> > -/* USB2 commands */
> > +/* USB commands */
> > #define CMD_VERSION 1 /* also used for VERSION_REPLY */
> > #define CMD_CAN_RX 2 /* device to host only */
> > #define CMD_CAN_TX 3 /* also used for TX_DONE */
> > @@ -36,20 +43,29 @@ MODULE_LICENSE("GPL v2");
> > #define CMD_IDADD 6 /* also used for IDADD_REPLY */
> >
> > /* esd CAN message flags - dlc field */
> > -#define ESD_RTR 0x10
> > +#define ESD_DLC_RTR 0x10
> > +#define ESD_DLC_NO_BRS 0x10
> > +#define ESD_DLC_ESI 0x20
> > +#define ESD_DLC_FD 0x80
> > +
> >
> > /* esd CAN message flags - id field */
> > #define ESD_EXTID 0x20000000
> > #define ESD_EVENT 0x40000000
> > #define ESD_IDMASK 0x1fffffff
> >
> > -/* esd CAN event ids used by this driver */
> > -#define ESD_EV_CAN_ERROR_EXT 2
> > +/* esd CAN event ids */
> > +#define ESD_EV_CAN_ERROR 0 /* General bus diagnostics data */
> > +#define ESD_EV_BAUD_CHANGE 1 /* Bit rate change event (unused within this driver) */
> > +#define ESD_EV_CAN_ERROR_EXT 2 /* CAN controller specific diagnostic data */
> > +#define ESD_EV_BUSLOAD 3 /* Busload event (unused within this driver) */
> >
> > -/* baudrate message flags */
> > +/* Baudrate message flags */
> > #define ESD_USB2_UBR 0x80000000
> > #define ESD_USB2_LOM 0x40000000
> > #define ESD_USB2_NO_BAUDRATE 0x7fffffff
> > +
> > +/* Bit timing CAN-USB/2 */
> > #define ESD_USB2_TSEG1_MIN 1
> > #define ESD_USB2_TSEG1_MAX 16
> > #define ESD_USB2_TSEG1_SHIFT 16
> > @@ -64,6 +80,28 @@ MODULE_LICENSE("GPL v2");
> > #define ESD_USB2_BRP_INC 1
> > #define ESD_USB2_3_SAMPLES 0x00800000
> >
> > +/* Bit timing CAN-USB/3 */
> > +#define ESD_USB3_TSEG1_MIN 1
> > +#define ESD_USB3_TSEG1_MAX 256
> > +#define ESD_USB3_TSEG2_MIN 1
> > +#define ESD_USB3_TSEG2_MAX 128
> > +#define ESD_USB3_SJW_MAX 128
> > +#define ESD_USB3_BRP_MIN 1
> > +#define ESD_USB3_BRP_MAX 1024
> > +#define ESD_USB3_BRP_INC 1
> > +/* Bit timing CAN-USB/3, data phase */
> > +#define ESD_USB3_DATA_TSEG1_MIN 1
> > +#define ESD_USB3_DATA_TSEG1_MAX 32
> > +#define ESD_USB3_DATA_TSEG2_MIN 1
> > +#define ESD_USB3_DATA_TSEG2_MAX 16
> > +#define ESD_USB3_DATA_SJW_MAX 8
> > +#define ESD_USB3_DATA_BRP_MIN 1
> > +#define ESD_USB3_DATA_BRP_MAX 32
> > +#define ESD_USB3_DATA_BRP_INC 1

Just a suggestion, but I think it is cleaner to directly put the
numerical values inside the struct can_bittiming_const declaration
rather than using intermediate values. By using the dot fields
(.tseg1_min…) there is no ambiguity on what the magic numbers mean.

> > +/* Transmitter Delay Compensation */
> > +#define ESD_TDC_MODE_AUTO 0
>
> Please do consistent indenting, here you use spaces not tabs.
>
> > +
> > /* esd IDADD message */
> > #define ESD_ID_ENABLE 0x80
> > #define ESD_MAX_ID_SEGMENT 64
> > @@ -78,15 +116,31 @@ MODULE_LICENSE("GPL v2");
> > #define SJA1000_ECC_MASK 0xc0
> >
> > /* esd bus state event codes */
> > -#define ESD_BUSSTATE_MASK 0xc0
> > +#define ESD_BUSSTATE_OK 0x00
> > #define ESD_BUSSTATE_WARN 0x40
> > #define ESD_BUSSTATE_ERRPASSIVE 0x80
> > #define ESD_BUSSTATE_BUSOFF 0xc0
> > +#define ESD_BUSSTATE_MASK 0xc0
> >
> > #define RX_BUFFER_SIZE 1024
> > #define MAX_RX_URBS 4
> > #define MAX_TX_URBS 16 /* must be power of 2 */
> >
> > +/* Modes for NTCAN_BAUDRATE_X */
> > +#define ESD_BAUDRATE_MODE_DISABLE 0 /* Remove from bus */
> > +#define ESD_BAUDRATE_MODE_INDEX 1 /* ESD (CiA) bit rate idx */
> > +#define ESD_BAUDRATE_MODE_BTR_CTRL 2 /* BTR values (Controller)*/
> > +#define ESD_BAUDRATE_MODE_BTR_CANONICAL 3 /* BTR values (Canonical) */
> > +#define ESD_BAUDRATE_MODE_NUM 4 /* Numerical bit rate */
> > +#define ESD_BAUDRATE_MODE_AUTOBAUD 5 /* Autobaud */
> > +
> > +/* Flags for NTCAN_BAUDRATE_X */
> > +#define ESD_BAUDRATE_FLAG_FD 0x0001 /* Enable CAN FD Mode */
> > +#define ESD_BAUDRATE_FLAG_LOM 0x0002 /* Enable Listen Only mode */
> > +#define ESD_BAUDRATE_FLAG_STM 0x0004 /* Enable Self test mode */
> > +#define ESD_BAUDRATE_FLAG_TRS 0x0008 /* Enable Triple Sampling */
> > +#define ESD_BAUDRATE_FLAG_TXP 0x0010 /* Enable Transmit Pause */
> > +
> > struct header_msg {
> > u8 len; /* len is always the total message length in 32bit words */
> > u8 cmd;
> > @@ -119,7 +173,10 @@ struct rx_msg {
> > u8 dlc;
> > __le32 ts;
> > __le32 id; /* upper 3 bits contain flags */
> > - u8 data[8];
> > + union {
> > + u8 cc[8]; /* classic CAN */
> > + u8 fd[64]; /* CAN FD */
> > + } data;
> > };
> >
> > struct tx_msg {
> > @@ -127,9 +184,12 @@ struct tx_msg {
> > u8 cmd;
> > u8 net;
> > u8 dlc;
> > - u32 hnd; /* opaque handle, not used by device */
> > + u32 hnd; /* opaque handle, not used by device */
> > __le32 id; /* upper 3 bits contain flags */
> > - u8 data[8];
> > + union {
> > + u8 cc[8]; /* classic CAN */
> > + u8 fd[64]; /* CAN FD */
> > + } data;
> > };
> >
> > struct tx_done_msg {
> > @@ -149,16 +209,41 @@ struct id_filter_msg {
> > __le32 mask[ESD_MAX_ID_SEGMENT + 1];
> > };
> >
> > +struct baudrate_x_cfg {
> > + __le16 brp; /* Bit rate pre-scaler */
> > + __le16 tseg1; /* TSEG1 register */
> > + __le16 tseg2; /* TSEG2 register */
> > + __le16 sjw; /* SJW register */
> > +};
> > +
> > +struct tdc_cfg {
> > + u8 tdc_mode; /* Transmitter Delay Compensation mode */
> > + u8 ssp_offset; /* Secondary Sample Point offset in mtq */
> > + s8 ssp_shift; /* Secondary Sample Point shift in mtq */
> > + u8 tdc_filter; /* Transmitter Delay Compensation */
> > +};
> > +
> > +struct baudrate_x {
>
> Nitpick: The tdc_cfg struct has a nice name, IMHO "baudrate_x" deserves
> a nice name, too.
>
> > + __le16 mode; /* Mode word */
> > + __le16 flags; /* Control flags */
> > + struct tdc_cfg tdc; /* TDC configuration */
> > + struct baudrate_x_cfg arb; /* Bit rate during arbitration phase */
> > + struct baudrate_x_cfg data; /* Bit rate during data phase */
> > +};
> > +
> > struct set_baudrate_msg {
> > u8 len;
> > u8 cmd;
> > u8 net;
> > u8 rsvd;
> > - __le32 baud;
> > + union {
> > + __le32 baud;
> > + struct baudrate_x baud_x;
> > + } u;
>
> BTW: you can use an anonymous union here, remove the "u" the you can
> access the members directly, e.g.:
>
> struct set_baudrate_msg {
> u8 len;
> u8 cmd;
> u8 net;
> u8 rsvd;
> __le32 baud;
> union {
> __le32 baud;
> struct baudrate_x baud_x;
> };
> };
>
> struct set_baudrate_msg *foo;
>
> foo->baud = 10;
>
> > };
> >
> > /* Main message type used between library and application */
> > -struct __attribute__ ((packed)) esd_usb2_msg {
> > +struct __packed esd_usb_msg {
> > union {
> > struct header_msg hdr;
> > struct version_msg version;
> > @@ -171,23 +256,24 @@ struct __attribute__ ((packed)) esd_usb2_msg {
> > } msg;
> > };
> >
> > -static struct usb_device_id esd_usb2_table[] = {
> > +static struct usb_device_id esd_usb_table[] = {
> > {USB_DEVICE(USB_ESDGMBH_VENDOR_ID, USB_CANUSB2_PRODUCT_ID)},
> > {USB_DEVICE(USB_ESDGMBH_VENDOR_ID, USB_CANUSBM_PRODUCT_ID)},
> > + {USB_DEVICE(USB_ESDGMBH_VENDOR_ID, USB_CANUSB3_PRODUCT_ID)},
> > {}
> > };
> > -MODULE_DEVICE_TABLE(usb, esd_usb2_table);
> > +MODULE_DEVICE_TABLE(usb, esd_usb_table);
> >
> > -struct esd_usb2_net_priv;
> > +struct esd_usb_net_priv;
> >
> > struct esd_tx_urb_context {
> > - struct esd_usb2_net_priv *priv;
> > + struct esd_usb_net_priv *priv;
> > u32 echo_index;
> > };
> >
> > -struct esd_usb2 {
> > +struct esd_usb {
> > struct usb_device *udev;
> > - struct esd_usb2_net_priv *nets[ESD_USB2_MAX_NETS];
> > + struct esd_usb_net_priv *nets[ESD_USB_MAX_NETS];
> >
> > struct usb_anchor rx_submitted;
> >
> > @@ -198,36 +284,64 @@ struct esd_usb2 {
> > dma_addr_t rxbuf_dma[MAX_RX_URBS];
> > };
> >
> > -struct esd_usb2_net_priv {
> > +struct esd_usb_net_priv {
> > struct can_priv can; /* must be the first member */
> >
> > atomic_t active_tx_jobs;
> > struct usb_anchor tx_submitted;
> > struct esd_tx_urb_context tx_contexts[MAX_TX_URBS];
> >
> > - struct esd_usb2 *usb2;
> > + struct esd_usb *usb;
> > struct net_device *netdev;
> > int index;
> > u8 old_state;
> > struct can_berr_counter bec;
> > };
> >
> > -static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv,
> > - struct esd_usb2_msg *msg)
> > +static void esd_usb_rx_event(struct esd_usb_net_priv *priv, struct esd_usb_msg *msg)
> > {
> > struct net_device_stats *stats = &priv->netdev->stats;
> > struct can_frame *cf;
> > struct sk_buff *skb;
> > u32 id = le32_to_cpu(msg->msg.rx.id) & ESD_IDMASK;
> >
> > +#if defined(DEBUG)
>
> please remove this debug code
>
> > + {
> > + static struct esd_usb_msg old_msg;
> > + static u32 rx_event_cnt;
> > +
> > + msg->msg.rx.ts = 0;
> > + if (memcmp(msg, &old_msg, 16)) {
> > + netdev_info(priv->netdev,
> > + "EVENT:%08d: id=%#02x dlc=%#02x %02x %02x %02x %02x - %02x %02x %02x %02x\n",
> > + rx_event_cnt,
> > + id,
> > + msg->msg.rx.dlc,
> > + msg->msg.rx.data.cc[0],
> > + msg->msg.rx.data.cc[1],
> > + msg->msg.rx.data.cc[2],
> > + msg->msg.rx.data.cc[3],
> > + msg->msg.rx.data.cc[4],
> > + msg->msg.rx.data.cc[5],
> > + msg->msg.rx.data.cc[6],
> > + msg->msg.rx.data.cc[7]);
> > + memcpy(&old_msg, msg, 16);
> > + }
> > + rx_event_cnt++;
> > + }
> > +#endif /* DEBUG */
> > +
> > if (id == ESD_EV_CAN_ERROR_EXT) {
> > - u8 state = msg->msg.rx.data[0];
> > - u8 ecc = msg->msg.rx.data[1];
> > - u8 rxerr = msg->msg.rx.data[2];
> > - u8 txerr = msg->msg.rx.data[3];
> > + /* Here, for ESD_EV_CAN_ERROR_EXT we don't need
> > + * any special treatment for EVMSG_X
> > + */
> > + u8 state = msg->msg.rx.data.cc[0];
> > + u8 ecc = msg->msg.rx.data.cc[1];
> > + u8 rxerr = msg->msg.rx.data.cc[2];
> > + u8 txerr = msg->msg.rx.data.cc[3];
>
> Can you add a new member to the union that allows easier decoding of the
> error?
>
> >
> > skb = alloc_can_err_skb(priv->netdev, &cf);
> > - if (skb == NULL) {
> > + if (!skb) {
> > stats->rx_dropped++;
> > return;
> > }
> > @@ -280,7 +394,7 @@ static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv,
> > cf->data[2] |= CAN_ERR_PROT_TX;
> >
> > if (priv->can.state == CAN_STATE_ERROR_WARNING ||
> > - priv->can.state == CAN_STATE_ERROR_PASSIVE) {
> > + priv->can.state == CAN_STATE_ERROR_PASSIVE) {
> > cf->data[1] = (txerr > rxerr) ?

This is not something introduced in this patch, but regardless, this
line looks odd. You should not report the greatest of txerr and rxerr
but the one which actually increased. Also, it would be great to add
support for CAN_CTRLMODE_BERR_REPORTING if the device is actually
capable of reporting the bus error counters.

> > CAN_ERR_CRTL_TX_PASSIVE :
> > CAN_ERR_CRTL_RX_PASSIVE;
> > @@ -293,16 +407,40 @@ static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv,
> > priv->bec.rxerr = rxerr;
> >
> > netif_rx(skb);
> > +
> > + } else if (id == ESD_EV_CAN_ERROR) {
> > + u8 state = msg->msg.rx.data.cc[1];
> > +
> > + /* Switching back to Error Warn and back to Error Passive
> > + * only is announced by means of a non-extended Error Event ...
> > + */
> > + switch (state & ESD_BUSSTATE_MASK) {
> > + case ESD_BUSSTATE_OK:
> > + priv->old_state = state;
> > + priv->can.state = CAN_STATE_ERROR_ACTIVE;
> > + priv->bec.txerr = 0;
> > + priv->bec.rxerr = 0;
> > + break;
> > + case ESD_BUSSTATE_WARN:
> > + /* ... intentionally, don't set priv->old_state here! */
> > + priv->can.state = CAN_STATE_ERROR_WARNING;
> > + break;
> > + default:
> > + /* Do nothing ... */
> > + break;
> > + }
> > }
> > }
> >
> > -static void esd_usb2_rx_can_msg(struct esd_usb2_net_priv *priv,
> > - struct esd_usb2_msg *msg)
> > +static void esd_usb_rx_can_msg(struct esd_usb_net_priv *priv, struct esd_usb_msg *msg)
> > {
> > struct net_device_stats *stats = &priv->netdev->stats;
> > - struct can_frame *cf;
> > + /* can.h:
> > + * ... the struct can_frame and struct canfd_frame intentionally
> > + * share the same layout ...
> > + */
>
> Please remove this comment.
>
> > + struct canfd_frame *cfd;
> > struct sk_buff *skb;
> > - int i;
> > u32 id;
> >
> > if (!netif_device_present(priv->netdev))
> > @@ -311,39 +449,63 @@ static void esd_usb2_rx_can_msg(struct esd_usb2_net_priv *priv,
> > id = le32_to_cpu(msg->msg.rx.id);
> >
> > if (id & ESD_EVENT) {
> > - esd_usb2_rx_event(priv, msg);
> > + esd_usb_rx_event(priv, msg);
> > } else {
> > - skb = alloc_can_skb(priv->netdev, &cf);
> > - if (skb == NULL) {
> > - stats->rx_dropped++;
> > - return;
> > - }
> >
> > - cf->can_id = id & ESD_IDMASK;
> > - can_frame_set_cc_len(cf, msg->msg.rx.dlc & ~ESD_RTR,
> > - priv->can.ctrlmode);
> > + if (msg->msg.rx.dlc & ESD_DLC_FD) {
> > + /* CAN FD */
> > + skb = alloc_canfd_skb(priv->netdev, &cfd);
> > + if (!skb) {
> > + stats->rx_dropped++;
> > + return;
> > + }
> >
> > - if (id & ESD_EXTID)
> > - cf->can_id |= CAN_EFF_FLAG;
> > + /* Masking by 0x0F is already done within can_fd_dlc2len()! */
> > + cfd->len = can_fd_dlc2len(msg->msg.rx.dlc);
> > +
> > + if ((msg->msg.rx.dlc & ESD_DLC_NO_BRS) == 0)
> > + cfd->flags |= CANFD_BRS;
> > +
> > + if (msg->msg.rx.dlc & ESD_DLC_ESI)
> > + cfd->flags |= CANFD_ESI;
> >
> > - if (msg->msg.rx.dlc & ESD_RTR) {
> > - cf->can_id |= CAN_RTR_FLAG;
> > + memcpy(cfd->data, msg->msg.rx.data.fd, cfd->len);
> > + stats->rx_bytes += cfd->len;
> > } else {
> > - for (i = 0; i < cf->len; i++)
> > - cf->data[i] = msg->msg.rx.data[i];
> > + /* Classic CAN */
> > + skb = alloc_can_skb(priv->netdev, (struct can_frame **)&cfd);
> > + if (!skb) {
> > + stats->rx_dropped++;
> > + return;
> > + }
> >
> > - stats->rx_bytes += cf->len;
> > + can_frame_set_cc_len((struct can_frame *)cfd,
> > + msg->msg.rx.dlc & 0x0F,
> > + priv->can.ctrlmode);
> > +
> > + if (msg->msg.rx.dlc & ESD_DLC_RTR) {
> > + /* No data copy for a RTR frame */
> > + cfd->can_id |= CAN_RTR_FLAG; // ok, due to memset(0)
> > + // in alloc_can_skb()

Here, we prefer to use C comment style (/* */) rather than C++ style (//).

> > + } else {
> > + memcpy(cfd->data, msg->msg.rx.data.cc, cfd->len);
> > + stats->rx_bytes += cfd->len;
> > + }
> > }
> > - stats->rx_packets++;
> >
> > + /* Common part for CAN FD and CAN classic ... */
> > + cfd->can_id |= id & ESD_IDMASK;
> > +
> > + if (id & ESD_EXTID)
> > + cfd->can_id |= CAN_EFF_FLAG;
> > +
> > + stats->rx_packets++;
> > netif_rx(skb);
> > }
> >
> > - return;
> > }
> >
> > -static void esd_usb2_tx_done_msg(struct esd_usb2_net_priv *priv,
> > - struct esd_usb2_msg *msg)
> > +static void esd_usb_tx_done_msg(struct esd_usb_net_priv *priv, struct esd_usb_msg *msg)
> > {
> > struct net_device_stats *stats = &priv->netdev->stats;
> > struct net_device *netdev = priv->netdev;
> > @@ -356,8 +518,7 @@ static void esd_usb2_tx_done_msg(struct esd_usb2_net_priv *priv,
> >
> > if (!msg->msg.txdone.status) {
> > stats->tx_packets++;
> > - stats->tx_bytes += can_get_echo_skb(netdev, context->echo_index,
> > - NULL);
> > + stats->tx_bytes += can_get_echo_skb(netdev, context->echo_index, NULL);
> > } else {
> > stats->tx_errors++;
> > can_free_echo_skb(netdev, context->echo_index, NULL);
> > @@ -370,9 +531,9 @@ static void esd_usb2_tx_done_msg(struct esd_usb2_net_priv *priv,
> > netif_wake_queue(netdev);
> > }
> >
> > -static void esd_usb2_read_bulk_callback(struct urb *urb)
> > +static void esd_usb_read_bulk_callback(struct urb *urb)
> > {
> > - struct esd_usb2 *dev = urb->context;
> > + struct esd_usb *dev = urb->context;
> > int retval;
> > int pos = 0;
> > int i;
> > @@ -394,9 +555,9 @@ static void esd_usb2_read_bulk_callback(struct urb *urb)
> > }
> >
> > while (pos < urb->actual_length) {
> > - struct esd_usb2_msg *msg;
> > + struct esd_usb_msg *msg;
> >
> > - msg = (struct esd_usb2_msg *)(urb->transfer_buffer + pos);
> > + msg = (struct esd_usb_msg *)(urb->transfer_buffer + pos);
> >
> > switch (msg->msg.hdr.cmd) {
> > case CMD_CAN_RX:
> > @@ -405,7 +566,7 @@ static void esd_usb2_read_bulk_callback(struct urb *urb)
> > break;
> > }
> >
> > - esd_usb2_rx_can_msg(dev->nets[msg->msg.rx.net], msg);
> > + esd_usb_rx_can_msg(dev->nets[msg->msg.rx.net], msg);
> > break;
> >
> > case CMD_CAN_TX:
> > @@ -414,8 +575,7 @@ static void esd_usb2_read_bulk_callback(struct urb *urb)
> > break;
> > }
> >
> > - esd_usb2_tx_done_msg(dev->nets[msg->msg.txdone.net],
> > - msg);
> > + esd_usb_tx_done_msg(dev->nets[msg->msg.txdone.net], msg);
> > break;
> > }
> >
> > @@ -429,8 +589,8 @@ static void esd_usb2_read_bulk_callback(struct urb *urb)
> >
> > resubmit_urb:
> > usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
> > - urb->transfer_buffer, RX_BUFFER_SIZE,
> > - esd_usb2_read_bulk_callback, dev);
> > + urb->transfer_buffer, RX_BUFFER_SIZE,
> > + esd_usb_read_bulk_callback, dev);
> >
> > retval = usb_submit_urb(urb, GFP_ATOMIC);
> > if (retval == -ENODEV) {
> > @@ -443,18 +603,17 @@ static void esd_usb2_read_bulk_callback(struct urb *urb)
> > "failed resubmitting read bulk urb: %d\n", retval);
> > }
> >
> > - return;
> > }
> >
> > /*
> > * callback for bulk IN urb
> > */
> > -static void esd_usb2_write_bulk_callback(struct urb *urb)
> > +static void esd_usb_write_bulk_callback(struct urb *urb)
> > {
> > struct esd_tx_urb_context *context = urb->context;
> > - struct esd_usb2_net_priv *priv;
> > + struct esd_usb_net_priv *priv;
> > struct net_device *netdev;
> > - size_t size = sizeof(struct esd_usb2_msg);
> > + size_t size = sizeof(struct esd_usb_msg);
> >
> > WARN_ON(!context);
> >
> > @@ -478,7 +637,7 @@ static ssize_t firmware_show(struct device *d,
> > struct device_attribute *attr, char *buf)
> > {
> > struct usb_interface *intf = to_usb_interface(d);
> > - struct esd_usb2 *dev = usb_get_intfdata(intf);
> > + struct esd_usb *dev = usb_get_intfdata(intf);
> >
> > return sprintf(buf, "%d.%d.%d\n",
> > (dev->version >> 12) & 0xf,
> > @@ -491,7 +650,7 @@ static ssize_t hardware_show(struct device *d,
> > struct device_attribute *attr, char *buf)
> > {
> > struct usb_interface *intf = to_usb_interface(d);
> > - struct esd_usb2 *dev = usb_get_intfdata(intf);
> > + struct esd_usb *dev = usb_get_intfdata(intf);
> >
> > return sprintf(buf, "%d.%d.%d\n",
> > (dev->version >> 28) & 0xf,
> > @@ -504,13 +663,13 @@ static ssize_t nets_show(struct device *d,
> > struct device_attribute *attr, char *buf)
> > {
> > struct usb_interface *intf = to_usb_interface(d);
> > - struct esd_usb2 *dev = usb_get_intfdata(intf);
> > + struct esd_usb *dev = usb_get_intfdata(intf);
> >
> > return sprintf(buf, "%d", dev->net_count);
> > }
> > static DEVICE_ATTR_RO(nets);
> >
> > -static int esd_usb2_send_msg(struct esd_usb2 *dev, struct esd_usb2_msg *msg)
> > +static int esd_usb_send_msg(struct esd_usb *dev, struct esd_usb_msg *msg)
> > {
> > int actual_length;
> >
> > @@ -522,8 +681,7 @@ static int esd_usb2_send_msg(struct esd_usb2 *dev, struct esd_usb2_msg *msg)
> > 1000);
> > }
> >
> > -static int esd_usb2_wait_msg(struct esd_usb2 *dev,
> > - struct esd_usb2_msg *msg)
> > +static int esd_usb_wait_msg(struct esd_usb *dev, struct esd_usb_msg *msg)
> > {
> > int actual_length;
> >
> > @@ -535,7 +693,7 @@ static int esd_usb2_wait_msg(struct esd_usb2 *dev,
> > 1000);
> > }
> >
> > -static int esd_usb2_setup_rx_urbs(struct esd_usb2 *dev)
> > +static int esd_usb_setup_rx_urbs(struct esd_usb *dev)
> > {
> > int i, err = 0;
> >
> > @@ -554,8 +712,7 @@ static int esd_usb2_setup_rx_urbs(struct esd_usb2 *dev)
> > break;
> > }
> >
> > - buf = usb_alloc_coherent(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL,
> > - &buf_dma);
> > + buf = usb_alloc_coherent(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL, &buf_dma);
> > if (!buf) {
> > dev_warn(dev->udev->dev.parent,
> > "No memory left for USB buffer\n");
> > @@ -568,15 +725,14 @@ static int esd_usb2_setup_rx_urbs(struct esd_usb2 *dev)
> > usb_fill_bulk_urb(urb, dev->udev,
> > usb_rcvbulkpipe(dev->udev, 1),
> > buf, RX_BUFFER_SIZE,
> > - esd_usb2_read_bulk_callback, dev);
> > + esd_usb_read_bulk_callback, dev);
> > urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
> > usb_anchor_urb(urb, &dev->rx_submitted);
> >
> > err = usb_submit_urb(urb, GFP_KERNEL);
> > if (err) {
> > usb_unanchor_urb(urb);
> > - usb_free_coherent(dev->udev, RX_BUFFER_SIZE, buf,
> > - urb->transfer_dma);
> > + usb_free_coherent(dev->udev, RX_BUFFER_SIZE, buf, urb->transfer_dma);
> > goto freeurb;
> > }
> >
> > @@ -609,11 +765,11 @@ static int esd_usb2_setup_rx_urbs(struct esd_usb2 *dev)
> > /*
> > * Start interface
> > */
> > -static int esd_usb2_start(struct esd_usb2_net_priv *priv)
> > +static int esd_usb_start(struct esd_usb_net_priv *priv)
> > {
> > - struct esd_usb2 *dev = priv->usb2;
> > + struct esd_usb *dev = priv->usb;
> > struct net_device *netdev = priv->netdev;
> > - struct esd_usb2_msg *msg;
> > + struct esd_usb_msg *msg;
> > int err, i;
> >
> > msg = kmalloc(sizeof(*msg), GFP_KERNEL);
> > @@ -624,7 +780,7 @@ static int esd_usb2_start(struct esd_usb2_net_priv *priv)
> >
> > /*
> > * Enable all IDs
> > - * The IDADD message takes up to 64 32 bit bitmasks (2048 bits).
> > + * The IDADD message takes up to 64 32-bit bitmasks (2048 bits).
> > * Each bit represents one 11 bit CAN identifier. A set bit
> > * enables reception of the corresponding CAN identifier. A cleared
> > * bit disabled this identifier. An additional bitmask value
> > @@ -641,14 +797,15 @@ static int esd_usb2_start(struct esd_usb2_net_priv *priv)
> > msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */
> > for (i = 0; i < ESD_MAX_ID_SEGMENT; i++)
> > msg->msg.filter.mask[i] = cpu_to_le32(0xffffffff);
> > +
> > /* enable 29bit extended IDs */
> > msg->msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001);
> >
> > - err = esd_usb2_send_msg(dev, msg);
> > + err = esd_usb_send_msg(dev, msg);
> > if (err)
> > goto out;
> >
> > - err = esd_usb2_setup_rx_urbs(dev);
> > + err = esd_usb_setup_rx_urbs(dev);
> > if (err)
> > goto out;
> >
> > @@ -664,16 +821,16 @@ static int esd_usb2_start(struct esd_usb2_net_priv *priv)
> > return err;
> > }
> >
> > -static void unlink_all_urbs(struct esd_usb2 *dev)
> > +static void unlink_all_urbs(struct esd_usb *dev)
> > {
> > - struct esd_usb2_net_priv *priv;
> > + struct esd_usb_net_priv *priv;
> > int i, j;
> >
> > usb_kill_anchored_urbs(&dev->rx_submitted);
> >
> > for (i = 0; i < MAX_RX_URBS; ++i)
> > - usb_free_coherent(dev->udev, RX_BUFFER_SIZE,
> > - dev->rxbuf[i], dev->rxbuf_dma[i]);
> > + usb_free_coherent(dev->udev, RX_BUFFER_SIZE, dev->rxbuf[i], dev->rxbuf_dma[i]);
> > +
> >
> > for (i = 0; i < dev->net_count; i++) {
> > priv = dev->nets[i];
> > @@ -687,9 +844,9 @@ static void unlink_all_urbs(struct esd_usb2 *dev)
> > }
> > }
> >
> > -static int esd_usb2_open(struct net_device *netdev)
> > +static int esd_usb_open(struct net_device *netdev)
> > {
> > - struct esd_usb2_net_priv *priv = netdev_priv(netdev);
> > + struct esd_usb_net_priv *priv = netdev_priv(netdev);
> > int err;
> >
> > /* common open */
> > @@ -698,7 +855,7 @@ static int esd_usb2_open(struct net_device *netdev)
> > return err;
> >
> > /* finally start device */
> > - err = esd_usb2_start(priv);
> > + err = esd_usb_start(priv);
> > if (err) {
> > netdev_warn(netdev, "couldn't start device: %d\n", err);
> > close_candev(netdev);
> > @@ -710,20 +867,23 @@ static int esd_usb2_open(struct net_device *netdev)
> > return 0;
> > }
> >
> > -static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb,
> > - struct net_device *netdev)
> > +static netdev_tx_t esd_usb_start_xmit(struct sk_buff *skb, struct net_device *netdev)
> > {
> > - struct esd_usb2_net_priv *priv = netdev_priv(netdev);
> > - struct esd_usb2 *dev = priv->usb2;
> > + struct esd_usb_net_priv *priv = netdev_priv(netdev);
> > + struct esd_usb *dev = priv->usb;
> > struct esd_tx_urb_context *context = NULL;
> > struct net_device_stats *stats = &netdev->stats;
> > - struct can_frame *cf = (struct can_frame *)skb->data;
> > - struct esd_usb2_msg *msg;
> > + /* can.h:
> > + * ... the struct can_frame and struct canfd_frame intentionally
> > + * share the same layout ...
> > + */
> > + struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
> > + struct esd_usb_msg *msg;
> > struct urb *urb;
> > u8 *buf;
> > int i, err;
> > int ret = NETDEV_TX_OK;
> > - size_t size = sizeof(struct esd_usb2_msg);
> > + size_t size = sizeof(struct esd_usb_msg);
> >
> > if (can_dropped_invalid_skb(netdev, skb))
> > return NETDEV_TX_OK;
> > @@ -736,8 +896,7 @@ static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb,
> > goto nourbmem;
> > }
> >
> > - buf = usb_alloc_coherent(dev->udev, size, GFP_ATOMIC,
> > - &urb->transfer_dma);
> > + buf = usb_alloc_coherent(dev->udev, size, GFP_ATOMIC, &urb->transfer_dma);
> > if (!buf) {
> > netdev_err(netdev, "No memory left for USB buffer\n");
> > stats->tx_dropped++;
> > @@ -745,24 +904,35 @@ static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb,
> > goto nobufmem;
> > }
> >
> > - msg = (struct esd_usb2_msg *)buf;
> > + msg = (struct esd_usb_msg *)buf;
> >
> > msg->msg.hdr.len = 3; /* minimal length */
> > msg->msg.hdr.cmd = CMD_CAN_TX;
> > msg->msg.tx.net = priv->index;
> > - msg->msg.tx.dlc = can_get_cc_dlc(cf, priv->can.ctrlmode);
> > - msg->msg.tx.id = cpu_to_le32(cf->can_id & CAN_ERR_MASK);
> >
> > - if (cf->can_id & CAN_RTR_FLAG)
> > - msg->msg.tx.dlc |= ESD_RTR;
> > + if (can_is_canfd_skb(skb)) {
> > + /* CAN FD */
> > + msg->msg.tx.dlc = can_fd_len2dlc(cfd->len);
> > + msg->msg.tx.dlc |= ESD_DLC_FD;
> >
> > - if (cf->can_id & CAN_EFF_FLAG)
> > - msg->msg.tx.id |= cpu_to_le32(ESD_EXTID);
> > + if ((cfd->flags & CANFD_BRS) == 0)
> > + msg->msg.tx.dlc |= ESD_DLC_NO_BRS;
> > + } else {
> > + /* Classic CAN */
> > + msg->msg.tx.dlc = can_get_cc_dlc((struct can_frame *)cfd, priv->can.ctrlmode);
> > +
> > + if (cfd->can_id & CAN_RTR_FLAG)
> > + msg->msg.tx.dlc |= ESD_DLC_RTR;
> > + }
> >
> > - for (i = 0; i < cf->len; i++)
> > - msg->msg.tx.data[i] = cf->data[i];
> > + /* Common for classic CAN and CAN FD */
> > + msg->msg.hdr.len += (cfd->len + 3) >> 2;
> >
> > - msg->msg.hdr.len += (cf->len + 3) >> 2;
> > + msg->msg.tx.id = cpu_to_le32(cfd->can_id & CAN_ERR_MASK);
> > + if (cfd->can_id & CAN_EFF_FLAG)
> > + msg->msg.tx.id |= cpu_to_le32(ESD_EXTID);
> > +
> > + memcpy(msg->msg.tx.data.fd, cfd->data, cfd->len);
> >
> > for (i = 0; i < MAX_TX_URBS; i++) {
> > if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) {
> > @@ -788,7 +958,7 @@ static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb,
> >
> > usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), buf,
> > msg->msg.hdr.len << 2,
> > - esd_usb2_write_bulk_callback, context);
> > + esd_usb_write_bulk_callback, context);
> >
> > urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
> >
> > @@ -839,33 +1009,34 @@ static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb,
> > return ret;
> > }
> >
> > -static int esd_usb2_close(struct net_device *netdev)
> > +static int esd_usb_close(struct net_device *netdev)
> > {
> > - struct esd_usb2_net_priv *priv = netdev_priv(netdev);
> > - struct esd_usb2_msg *msg;
> > + struct esd_usb_net_priv *priv = netdev_priv(netdev);
> > + struct esd_usb_msg *msg;
> > int i;
> >
> > msg = kmalloc(sizeof(*msg), GFP_KERNEL);
> > if (!msg)
> > return -ENOMEM;
> >
> > - /* Disable all IDs (see esd_usb2_start()) */
> > + /* Disable all IDs (see esd_usb_start()) */
> > msg->msg.hdr.cmd = CMD_IDADD;
> > msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT;
> > msg->msg.filter.net = priv->index;
> > msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */
> > for (i = 0; i <= ESD_MAX_ID_SEGMENT; i++)
> > msg->msg.filter.mask[i] = 0;
> > - if (esd_usb2_send_msg(priv->usb2, msg) < 0)
> > + if (esd_usb_send_msg(priv->usb, msg) < 0)
> > netdev_err(netdev, "sending idadd message failed\n");
> >
> > - /* set CAN controller to reset mode */
> > + /* Set CAN controller to reset mode */
> > msg->msg.hdr.len = 2;
> > msg->msg.hdr.cmd = CMD_SETBAUD;
> > msg->msg.setbaud.net = priv->index;
> > msg->msg.setbaud.rsvd = 0;
> > - msg->msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE);
> > - if (esd_usb2_send_msg(priv->usb2, msg) < 0)
> > + /* Sending ESD_USB2_NO_BAUDRATE is sufficient for CAN-USB/3, even in CAN FD mode, too */
> > + msg->msg.setbaud.u.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE);
> > + if (esd_usb_send_msg(priv->usb, msg) < 0)
> > netdev_err(netdev, "sending setbaud message failed\n");
> >
> > priv->can.state = CAN_STATE_STOPPED;
> > @@ -879,10 +1050,10 @@ static int esd_usb2_close(struct net_device *netdev)
> > return 0;
> > }
> >
> > -static const struct net_device_ops esd_usb2_netdev_ops = {
> > - .ndo_open = esd_usb2_open,
> > - .ndo_stop = esd_usb2_close,
> > - .ndo_start_xmit = esd_usb2_start_xmit,
> > +static const struct net_device_ops esd_usb_netdev_ops = {
> > + .ndo_open = esd_usb_open,
> > + .ndo_stop = esd_usb_close,
> > + .ndo_start_xmit = esd_usb_start_xmit,
> > .ndo_change_mtu = can_change_mtu,
> > };
> >
> > @@ -898,11 +1069,35 @@ static const struct can_bittiming_const esd_usb2_bittiming_const = {
> > .brp_inc = ESD_USB2_BRP_INC,
> > };
> >
> > +static const struct can_bittiming_const esd_usb3_bittiming_const = {
> > + .name = "esd_usb3",
> > + .tseg1_min = ESD_USB3_TSEG1_MIN,
> > + .tseg1_max = ESD_USB3_TSEG1_MAX,
> > + .tseg2_min = ESD_USB3_TSEG2_MIN,
> > + .tseg2_max = ESD_USB3_TSEG2_MAX,
> > + .sjw_max = ESD_USB3_SJW_MAX,
> > + .brp_min = ESD_USB3_BRP_MIN,
> > + .brp_max = ESD_USB3_BRP_MAX,
> > + .brp_inc = ESD_USB3_BRP_INC,
> > +};
> > +
> > +static const struct can_bittiming_const esd_usb3_data_bittiming_const = {
> > + .name = "esd_usb3",
> > + .tseg1_min = ESD_USB3_DATA_TSEG1_MIN,
> > + .tseg1_max = ESD_USB3_DATA_TSEG1_MAX,
> > + .tseg2_min = ESD_USB3_DATA_TSEG2_MIN,
> > + .tseg2_max = ESD_USB3_DATA_TSEG2_MAX,
> > + .sjw_max = ESD_USB3_DATA_SJW_MAX,
> > + .brp_min = ESD_USB3_DATA_BRP_MIN,
> > + .brp_max = ESD_USB3_DATA_BRP_MAX,
> > + .brp_inc = ESD_USB3_DATA_BRP_INC,
> > +};
> > +
> > static int esd_usb2_set_bittiming(struct net_device *netdev)
> > {
> > - struct esd_usb2_net_priv *priv = netdev_priv(netdev);
> > + struct esd_usb_net_priv *priv = netdev_priv(netdev);
> > struct can_bittiming *bt = &priv->can.bittiming;
> > - struct esd_usb2_msg *msg;
> > + struct esd_usb_msg *msg;
> > int err;
> > u32 canbtr;
> > int sjw_shift;
> > @@ -913,19 +1108,15 @@ static int esd_usb2_set_bittiming(struct net_device *netdev)
> >
> > canbtr |= (bt->brp - 1) & (ESD_USB2_BRP_MAX - 1);
> >
> > - if (le16_to_cpu(priv->usb2->udev->descriptor.idProduct) ==
> > - USB_CANUSBM_PRODUCT_ID)
> > + if (le16_to_cpu(priv->usb->udev->descriptor.idProduct) == USB_CANUSBM_PRODUCT_ID)
> > sjw_shift = ESD_USBM_SJW_SHIFT;
> > else
> > sjw_shift = ESD_USB2_SJW_SHIFT;
> >
> > - canbtr |= ((bt->sjw - 1) & (ESD_USB2_SJW_MAX - 1))
> > - << sjw_shift;
> > - canbtr |= ((bt->prop_seg + bt->phase_seg1 - 1)
> > - & (ESD_USB2_TSEG1_MAX - 1))
> > + canbtr |= ((bt->sjw - 1) & (ESD_USB2_SJW_MAX - 1)) << sjw_shift;
> > + canbtr |= ((bt->prop_seg + bt->phase_seg1 - 1) & (ESD_USB2_TSEG1_MAX - 1))
> > << ESD_USB2_TSEG1_SHIFT;
> > - canbtr |= ((bt->phase_seg2 - 1) & (ESD_USB2_TSEG2_MAX - 1))
> > - << ESD_USB2_TSEG2_SHIFT;
> > + canbtr |= ((bt->phase_seg2 - 1) & (ESD_USB2_TSEG2_MAX - 1)) << ESD_USB2_TSEG2_SHIFT;
> > if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
> > canbtr |= ESD_USB2_3_SAMPLES;
> >
> > @@ -937,20 +1128,97 @@ static int esd_usb2_set_bittiming(struct net_device *netdev)
> > msg->msg.hdr.cmd = CMD_SETBAUD;
> > msg->msg.setbaud.net = priv->index;
> > msg->msg.setbaud.rsvd = 0;
> > - msg->msg.setbaud.baud = cpu_to_le32(canbtr);
> > + msg->msg.setbaud.u.baud = cpu_to_le32(canbtr);
> >
> > netdev_info(netdev, "setting BTR=%#x\n", canbtr);
> >
> > - err = esd_usb2_send_msg(priv->usb2, msg);
> > + err = esd_usb_send_msg(priv->usb, msg);
> > +
> > + kfree(msg);
> > + return err;
> > +}
> > +
> > +static int esd_usb3_set_bittiming(struct net_device *netdev)
> > +{
> > + struct esd_usb_net_priv *priv = netdev_priv(netdev);
> > + struct can_bittiming *bt = &priv->can.bittiming;
> > + struct can_bittiming *d_bt = &priv->can.data_bittiming;
> > + struct esd_usb_msg *msg;
> > + int err;
> > + u16 mode;
> > + u16 flags = 0;
> > + u16 brp, tseg1, tseg2, sjw;
> > + u16 d_brp, d_tseg1, d_tseg2, d_sjw;
> > +
> > + msg = kmalloc(sizeof(*msg), GFP_KERNEL);
> > + if (!msg)
> > + return -ENOMEM;
> > +
> > + /* Canonical is the most reasonable mode for SocketCAN on CAN-USB/3 ... */
> > + mode = ESD_BAUDRATE_MODE_BTR_CANONICAL;
> > +
> > + if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
> > + flags |= ESD_BAUDRATE_FLAG_LOM;
> > +
> > + if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
> > + flags |= ESD_BAUDRATE_FLAG_TRS;
> > +
> > + brp = bt->brp & (ESD_USB3_BRP_MAX - 1);
> > + sjw = bt->sjw & (ESD_USB3_SJW_MAX - 1);
> > + tseg1 = (bt->prop_seg + bt->phase_seg1) & (ESD_USB3_TSEG1_MAX - 1);
> > + tseg2 = bt->phase_seg2 & (ESD_USB3_TSEG2_MAX - 1);
> > +
> > + msg->msg.setbaud.u.baud_x.arb.brp = cpu_to_le16(brp);
> > + msg->msg.setbaud.u.baud_x.arb.sjw = cpu_to_le16(sjw);
> > + msg->msg.setbaud.u.baud_x.arb.tseg1 = cpu_to_le16(tseg1);
> > + msg->msg.setbaud.u.baud_x.arb.tseg2 = cpu_to_le16(tseg2);
> > +
> > + if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
> > + d_brp = d_bt->brp & (ESD_USB3_DATA_BRP_MAX - 1);
> > + d_sjw = d_bt->sjw & (ESD_USB3_DATA_SJW_MAX - 1);
> > + d_tseg1 = (d_bt->prop_seg + d_bt->phase_seg1) & (ESD_USB3_DATA_TSEG1_MAX - 1);
> > + d_tseg2 = d_bt->phase_seg2 & (ESD_USB3_DATA_TSEG2_MAX - 1);
> > + flags |= ESD_BAUDRATE_FLAG_FD;
> > + } else {
> > + d_brp = 0;
> > + d_sjw = 0;
> > + d_tseg1 = 0;
> > + d_tseg2 = 0;
> > + }
> > +
> > + msg->msg.setbaud.u.baud_x.data.brp = cpu_to_le16(d_brp);
> > + msg->msg.setbaud.u.baud_x.data.sjw = cpu_to_le16(d_sjw);
> > + msg->msg.setbaud.u.baud_x.data.tseg1 = cpu_to_le16(d_tseg1);
> > + msg->msg.setbaud.u.baud_x.data.tseg2 = cpu_to_le16(d_tseg2);
> > + msg->msg.setbaud.u.baud_x.mode = cpu_to_le16(mode);
> > + msg->msg.setbaud.u.baud_x.flags = cpu_to_le16(flags);
> > + msg->msg.setbaud.u.baud_x.tdc.tdc_mode = ESD_TDC_MODE_AUTO;
> > + msg->msg.setbaud.u.baud_x.tdc.ssp_offset = 0;
> > + msg->msg.setbaud.u.baud_x.tdc.ssp_shift = 0;
> > + msg->msg.setbaud.u.baud_x.tdc.tdc_filter = 0;

For TDC, please use the existing framework. Example:

https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git/commit/?id=1010a8fa96086d746251954e709f9fad751b1f0a

> > + msg->msg.hdr.len = 7;
> > + msg->msg.hdr.cmd = CMD_SETBAUD;
> > +
> > + msg->msg.setbaud.net = priv->index;
> > + msg->msg.setbaud.rsvd = 0;
> > +
> > + netdev_info(netdev,
> > + "ctrlmode:{ is:%#x, spprted:%#x }, esd-net:%u, esd-mode:%#x, esd-flg:%#x, arb:{ brp:%u, ts1:%u, ts2:%u, sjw:%u }, data:{ dbrp:%u, dts1:%u, dts2:%u dsjw:%u }\n",
> > + priv->can.ctrlmode, priv->can.ctrlmode_supported,
> > + priv->index, mode, flags,
> > + brp, tseg1, tseg2, sjw,
> > + d_brp, d_tseg1, d_tseg2, d_sjw);
>
> Please remove it make it a netdev_debug()
>
> > +
> > + err = esd_usb_send_msg(priv->usb, msg);
> >
> > kfree(msg);
> > return err;
> > }
> >
> > -static int esd_usb2_get_berr_counter(const struct net_device *netdev,
> > - struct can_berr_counter *bec)
> > +static int esd_usb_get_berr_counter(const struct net_device *netdev, struct can_berr_counter *bec)
> > {
> > - struct esd_usb2_net_priv *priv = netdev_priv(netdev);
> > + struct esd_usb_net_priv *priv = netdev_priv(netdev);
> >
> > bec->txerr = priv->bec.txerr;
> > bec->rxerr = priv->bec.rxerr;
> > @@ -958,7 +1226,7 @@ static int esd_usb2_get_berr_counter(const struct net_device *netdev,
> > return 0;
> > }
> >
> > -static int esd_usb2_set_mode(struct net_device *netdev, enum can_mode mode)
> > +static int esd_usb_set_mode(struct net_device *netdev, enum can_mode mode)
> > {
> > switch (mode) {
> > case CAN_MODE_START:
> > @@ -972,11 +1240,11 @@ static int esd_usb2_set_mode(struct net_device *netdev, enum can_mode mode)
> > return 0;
> > }
> >
> > -static int esd_usb2_probe_one_net(struct usb_interface *intf, int index)
> > +static int esd_usb_probe_one_net(struct usb_interface *intf, int index)
> > {
> > - struct esd_usb2 *dev = usb_get_intfdata(intf);
> > + struct esd_usb *dev = usb_get_intfdata(intf);
> > struct net_device *netdev;
> > - struct esd_usb2_net_priv *priv;
> > + struct esd_usb_net_priv *priv;
> > int err = 0;
> > int i;
> >
> > @@ -995,30 +1263,45 @@ static int esd_usb2_probe_one_net(struct usb_interface *intf, int index)
> > for (i = 0; i < MAX_TX_URBS; i++)
> > priv->tx_contexts[i].echo_index = MAX_TX_URBS;
> >
> > - priv->usb2 = dev;
> > + priv->usb = dev;
> > priv->netdev = netdev;
> > priv->index = index;
> >
> > priv->can.state = CAN_STATE_STOPPED;
> > - priv->can.ctrlmode_supported = CAN_CTRLMODE_LISTENONLY |
> > - CAN_CTRLMODE_CC_LEN8_DLC;
> > + priv->can.ctrlmode_supported = CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_CC_LEN8_DLC;
> > +
> > + switch (le16_to_cpu(dev->udev->descriptor.idProduct)) {
> > + case USB_CANUSB3_PRODUCT_ID:
> > + priv->can.clock.freq = ESD_USB3_CAN_CLOCK;
> > + priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
> > + priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD;
> > + priv->can.bittiming_const = &esd_usb3_bittiming_const;
> > + priv->can.data_bittiming_const = &esd_usb3_data_bittiming_const;
> > + priv->can.do_set_bittiming = esd_usb3_set_bittiming;
> > + priv->can.do_set_data_bittiming = esd_usb3_set_bittiming;
> > + break;
> >
> > - if (le16_to_cpu(dev->udev->descriptor.idProduct) ==
> > - USB_CANUSBM_PRODUCT_ID)
> > + case USB_CANUSBM_PRODUCT_ID:
> > priv->can.clock.freq = ESD_USBM_CAN_CLOCK;
> > - else {
> > + priv->can.bittiming_const = &esd_usb2_bittiming_const;
> > + priv->can.do_set_bittiming = esd_usb2_set_bittiming;
> > + break;
> > +
> > + case USB_CANUSB2_PRODUCT_ID:
> > + default:
> > priv->can.clock.freq = ESD_USB2_CAN_CLOCK;
> > priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
> > + priv->can.bittiming_const = &esd_usb2_bittiming_const;
> > + priv->can.do_set_bittiming = esd_usb2_set_bittiming;
> > + break;
> > }
> >
> > - priv->can.bittiming_const = &esd_usb2_bittiming_const;
> > - priv->can.do_set_bittiming = esd_usb2_set_bittiming;
> > - priv->can.do_set_mode = esd_usb2_set_mode;
> > - priv->can.do_get_berr_counter = esd_usb2_get_berr_counter;
> > + priv->can.do_set_mode = esd_usb_set_mode;
> > + priv->can.do_get_berr_counter = esd_usb_get_berr_counter;
> >
> > netdev->flags |= IFF_ECHO; /* we support local echo */
> >
> > - netdev->netdev_ops = &esd_usb2_netdev_ops;
> > + netdev->netdev_ops = &esd_usb_netdev_ops;
> >
> > SET_NETDEV_DEV(netdev, &intf->dev);
> > netdev->dev_id = index;
> > @@ -1044,11 +1327,10 @@ static int esd_usb2_probe_one_net(struct usb_interface *intf, int index)
> > * check version information and number of available
> > * CAN interfaces
> > */
> > -static int esd_usb2_probe(struct usb_interface *intf,
> > - const struct usb_device_id *id)
> > +static int esd_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
> > {
> > - struct esd_usb2 *dev;
> > - struct esd_usb2_msg *msg;
> > + struct esd_usb *dev;
> > + struct esd_usb_msg *msg;
> > int i, err;
> >
> > dev = kzalloc(sizeof(*dev), GFP_KERNEL);
> > @@ -1076,13 +1358,13 @@ static int esd_usb2_probe(struct usb_interface *intf,
> > msg->msg.version.flags = 0;
> > msg->msg.version.drv_version = 0;
> >
> > - err = esd_usb2_send_msg(dev, msg);
> > + err = esd_usb_send_msg(dev, msg);
> > if (err < 0) {
> > dev_err(&intf->dev, "sending version message failed\n");
> > goto free_msg;
> > }
> >
> > - err = esd_usb2_wait_msg(dev, msg);
> > + err = esd_usb_wait_msg(dev, msg);
> > if (err < 0) {
> > dev_err(&intf->dev, "no version message answer\n");
> > goto free_msg;
> > @@ -1091,21 +1373,26 @@ static int esd_usb2_probe(struct usb_interface *intf,
> > dev->net_count = (int)msg->msg.version_reply.nets;
> > dev->version = le32_to_cpu(msg->msg.version_reply.version);
> >
> > + dev_info(&intf->dev, "version:{ hw:%d.%d.%d fw:%d.%d.%d }\n",
> > + (dev->version >> 28) & 0xf,
> > + (dev->version >> 24) & 0xf,
> > + (dev->version >> 16) & 0xff,
> > + (dev->version >> 12) & 0xf,
> > + (dev->version >> 8) & 0xf,
> > + (dev->version) & 0xff);
> > +
> > if (device_create_file(&intf->dev, &dev_attr_firmware))
> > - dev_err(&intf->dev,
> > - "Couldn't create device file for firmware\n");
> > + dev_err(&intf->dev, "Couldn't create device file for firmware\n");
> >
> > if (device_create_file(&intf->dev, &dev_attr_hardware))
> > - dev_err(&intf->dev,
> > - "Couldn't create device file for hardware\n");
> > + dev_err(&intf->dev, "Couldn't create device file for hardware\n");
> >
> > if (device_create_file(&intf->dev, &dev_attr_nets))
> > - dev_err(&intf->dev,
> > - "Couldn't create device file for nets\n");
> > + dev_err(&intf->dev, "Couldn't create device file for nets\n");
> >
> > /* do per device probing */
> > for (i = 0; i < dev->net_count; i++)
> > - esd_usb2_probe_one_net(intf, i);
> > + esd_usb_probe_one_net(intf, i);
> >
> > free_msg:
> > kfree(msg);
> > @@ -1118,9 +1405,9 @@ static int esd_usb2_probe(struct usb_interface *intf,
> > /*
> > * called by the usb core when the device is removed from the system
> > */
> > -static void esd_usb2_disconnect(struct usb_interface *intf)
> > +static void esd_usb_disconnect(struct usb_interface *intf)
> > {
> > - struct esd_usb2 *dev = usb_get_intfdata(intf);
> > + struct esd_usb *dev = usb_get_intfdata(intf);
> > struct net_device *netdev;
> > int i;
> >
> > @@ -1144,11 +1431,11 @@ static void esd_usb2_disconnect(struct usb_interface *intf)
> > }
> >
> > /* usb specific object needed to register this driver with the usb subsystem */
> > -static struct usb_driver esd_usb2_driver = {
> > - .name = "esd_usb2",
> > - .probe = esd_usb2_probe,
> > - .disconnect = esd_usb2_disconnect,
> > - .id_table = esd_usb2_table,
> > +static struct usb_driver esd_usb_driver = {
> > + .name = "esd_usb",
> > + .probe = esd_usb_probe,
> > + .disconnect = esd_usb_disconnect,
> > + .id_table = esd_usb_table,
> > };
> >
> > -module_usb_driver(esd_usb2_driver);
> > +module_usb_driver(esd_usb_driver);

Yours sincerely,
Vincent Mailhol