[PATCH v2 3/4] pinctrl: axp209: Support the AXP221/AXP223/AXP809 variant

From: Samuel Holland
Date: Mon Jun 20 2022 - 23:42:59 EST


These PMICs each have 2 GPIOs with the same register layout as AXP813,
but without an ADC function. They all fall back to the AXP221 compatible
string, so only that one needs to be listed in the driver.

Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
---

(no changes since v1)

drivers/pinctrl/pinctrl-axp209.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-axp209.c b/drivers/pinctrl/pinctrl-axp209.c
index 207cbae3a7bf..7ab20ac15391 100644
--- a/drivers/pinctrl/pinctrl-axp209.c
+++ b/drivers/pinctrl/pinctrl-axp209.c
@@ -73,7 +73,7 @@ static const struct pinctrl_pin_desc axp209_pins[] = {
PINCTRL_PIN(2, "GPIO2"),
};

-static const struct pinctrl_pin_desc axp813_pins[] = {
+static const struct pinctrl_pin_desc axp22x_pins[] = {
PINCTRL_PIN(0, "GPIO0"),
PINCTRL_PIN(1, "GPIO1"),
};
@@ -87,9 +87,16 @@ static const struct axp20x_pctrl_desc axp20x_data = {
.adc_mux = AXP20X_MUX_ADC,
};

+static const struct axp20x_pctrl_desc axp22x_data = {
+ .pins = axp22x_pins,
+ .npins = ARRAY_SIZE(axp22x_pins),
+ .ldo_mask = BIT(0) | BIT(1),
+ .gpio_status_offset = 0,
+};
+
static const struct axp20x_pctrl_desc axp813_data = {
- .pins = axp813_pins,
- .npins = ARRAY_SIZE(axp813_pins),
+ .pins = axp22x_pins,
+ .npins = ARRAY_SIZE(axp22x_pins),
.ldo_mask = BIT(0) | BIT(1),
.adc_mask = BIT(0),
.gpio_status_offset = 0,
@@ -388,6 +395,7 @@ static int axp20x_build_funcs_groups(struct platform_device *pdev)

static const struct of_device_id axp20x_pctl_match[] = {
{ .compatible = "x-powers,axp209-gpio", .data = &axp20x_data, },
+ { .compatible = "x-powers,axp221-gpio", .data = &axp22x_data, },
{ .compatible = "x-powers,axp813-gpio", .data = &axp813_data, },
{ }
};
--
2.35.1