[PATCH v13 0/15] PCI: imx6: refine codes and add the error propagation

From: Richard Zhu
Date: Fri Jun 17 2022 - 06:45:19 EST


This series patches refine pci-imx6 driver and do the following main changes.
- Encapsulate the clock enable into one standalone function
- Add the error propagation from host_init and resume
- Turn off regulator when the system is in suspend mode
- Let the probe successfully when link never comes up
- Do not hide the phy driver callbacks in core reset and clk_enable.
BTW, this series are verified on i.MX8MM EVK board when one NVME is used.

Main changes from v12 to v13:
- Call imx6_pcie_host_init() instead of duplicating codes in resume.
- Move the regulator enable out of imx6_pcie_deassert_core_reset().
Re-format the error handling in imx6_pcie_deassert_core_reset()
and imx6_pcie_host_init() accordingly.

Main changes from v11 to v12 issued by Bjorn:
- Add four intro patches to move code around to collect similar things
(PHY management, reset management) together. This makes the first
diff to collect clock enables simpler because it's not cluttered with
unrelated things that didn't actually change.
- Factor out ref clock disables so the disable function structure matches
the enable structure.
- Drop unused "ret" from "Reduce resume time ..." to avoid bisection
hole, then add it back in "Do not hide phy driver ..." where we start
using it again.
- Add patch to make imx6_pcie_clk_disable() symmetric with
imx6_pcie_clk_enable() in terms of enable/disable ordering.

Main changes from v10 to v11:
No code changes, just do the following operations refer to Bjorn's comments.
- Split #6 patch into two patches.
- Rebase to v5.19-rc1 based on for-next branch of Shawn's git.

Main changes from v9 to v10:
- Add the "Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>" tag into #3
and #4 patches.
- Refer to Bjorn's comments:
- refine the commit of the first patch
- keep alignment of the message format in the second patch
- More specific commit and subject of the #5 and #7 patches.
- Move the regualtor_disable into suspend, turn off the regulator when bus
is powered off and system in suspend mode.
- Let the driver probe successfully, return zero in imx6_pcie_start_link()
when PCIe link is down.
In this link down scenario, only start the PCIe link training in resume
when the link is up before system suspend to avoid the long latency in
the link training period.
- Don't hide phy driver callbacks in core reset and clk_enable, and refine
the error handling accordingly.
- Drop the #8 patch of v9 series, since the clocks and powers are not gated
off anymore when link is down.

Main changes from v8 to v9:
- Don't change pcie-designware codes, and do the error exit process only in
pci-imx6 driver internally.
- Move the phy driver callbacks to the proper places

Main changes from v7 to v8:
Regarding Bjorn's review comments.
- Align the format of the dev_info message and refine commit log of
#6/7/8 patches.
- Rename the err_reset_phy label, since there is no PHY reset in the out

Main changes from v6 to v7:
- Keep the regulator usage counter balance in the #5 patch of v6 series.

Main changes from v5 to v6:
- Refer to the following discussion with Fabio, fix the dump by his patch.
https://patchwork.kernel.org/project/linux-pci/patch/1641368602-20401-6-git-send-email-hongxing.zhu@xxxxxxx/
Refine and rebase this patch-set after Fabio' dump fix patch is merged.
- Add one new #4 patch to disable i.MX6QDL REF clock too when disable clocks
- Split the regulator refine codes into one standalone patch #5 in this version.

Main changes from v4 to v5:
- Since i.MX8MM PCIe support had been merged. Based on Lorenzo's git repos,
resend the patch-set after rebase.

Main changes from v3 to v4:
- Regarding Mark's comments, delete the regulator_is_enabled() check.
- Squash #3 and #6 of v3 patch into #5 patch of v4 set.

Main changes from v2 to v3:
- Add "Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>" tag into
first two patches.
- Add a Fixes tag into #3 patch.
- Split the #4 of v2 to two patches, one is clock disable codes move,
the other one is the acutal clock unbalance fix.
- Add a new host_exit() callback into dw_pcie_host_ops, then it could be
invoked to handle the unbalance issue in the error handling after
host_init() function when link is down.
- Add a new host_exit() callback for i.MX PCIe driver to handle this case
in the error handling after host_init.

Main changes from v1 to v2:
Regarding Lucas' comments.
- Move the placement of the new imx6_pcie_clk_enable() to avoid the
forward declarition.
- Seperate the second patch of v1 patch-set to three patches.
- Use the module_param to replace the kernel command line.
Regarding Bjorn's comments:
- Use the cover-letter for a multi-patch series.
- Correct the subject line, and refine the commit logs. For example,
remove the timestamp of the logs.

Bjorn Helgaas (5):
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type()
earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Disable clocks in reverse order of enable

Richard Zhu (10):
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Call host init function directly in resume
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Move regulator enable out of
imx6_pcie_deassert_core_reset()
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Reduce resume time by only starting link if it was up
before suspend
PCI: imx6: Do not hide phy driver callbacks and refine the error
handling

drivers/pci/controller/dwc/pci-imx6.c | 574 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------------------------------------------------------------
1 file changed, 308 insertions(+), 266 deletions(-)