Re: [PATCH v22 2/3] usb: misc: Add onboard_usb_hub driver

From: Doug Anderson
Date: Thu Jun 16 2022 - 17:29:03 EST


Hi,

On Thu, Jun 16, 2022 at 2:08 PM Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
>
> On Thu, Jun 16, 2022 at 01:12:32PM -0700, Doug Anderson wrote:
> > Hi,
> >
> > On Wed, Jun 15, 2022 at 4:22 PM Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
> > >
> > > > > +void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list)
> > > > > +{
> > > > > + int i;
> > > > > + struct usb_hcd *hcd = bus_to_hcd(parent_hub->bus);
> > > > > + struct device_node *np, *npc;
> > > > > + struct platform_device *pdev = NULL;
> > > > > + struct pdev_list_entry *pdle;
> > > > > +
> > > > > + if (!parent_hub->dev.of_node)
> > > > > + return;
> > > > > +
> > > > > + for (i = 1; i <= parent_hub->maxchild; i++) {
> > > > > + np = usb_of_get_device_node(parent_hub, i);
> > > > > + if (!np)
> > > > > + continue;
> > > > > +
> > > > > + if (!of_is_onboard_usb_hub(np))
> > > > > + goto node_put;
> > > > > +
> > > > > + npc = of_parse_phandle(np, "companion-hub", 0);
> > > > > + if (npc) {
> > > > > + /*
> > > > > + * Hubs with companions share the same platform device.
> > > > > + * Create the plaform device only for the hub that is
> > > > > + * connected to the primary HCD (directly or through
> > > > > + * other hubs).
> > > > > + */
> > > > > + if (!usb_hcd_is_primary_hcd(hcd)) {
> > > > > + of_node_put(npc);
> > > > > + goto node_put;
> > > > > + }
> > > > > +
> > > > > + pdev = of_find_device_by_node(npc);
> > > > > + of_node_put(npc);
> > > > > + } else {
> > > > > + /*
> > > > > + * For root hubs this function can be called multiple times
> > > > > + * for the same root hub node (the HCD node). Make sure only
> > > > > + * one platform device is created for this hub.
> > > > > + */
> > > > > + if (!parent_hub->parent && !usb_hcd_is_primary_hcd(hcd))
> > > > > + goto node_put;
> > > >
> > > > I don't understand the "else" case above. What case exactly are we
> > > > handling again? This is when:
> > > > * the hub is presumably just a 2.0 hub since there is no companion.
> > > > * our parent is the root hub and the USB 2.0 hub we're looking at is
> > > > not the primary
> > >
> > > The 'else' case can be entered for hubs connected to a root hub or to another
> > > hub further down in the tree, but we bail out only for first level hubs.
> > >
> > > > ...but that doesn't make a lot of sense to me? I must have missed something...
> > >
> > > It's not super-obvious, this bit is important: "this function can be called
> > > multiple times for the same root hub node". For any first level hub we only
> > > create a pdev if this function is called on behalf of the primary HCD. That
> > > is also true of a hub connected to the secondary HCD. We only want to create
> > > one pdev and there is supposedly always a primary HCD.
> > >
> > > Maybe it would be slightly clearer if the function returned before the loop
> > > if this condition is met.
> >
> > I guess I'm still pretty confused. You say "For root hubs this
> > function can be called multiple times for the same root hub node".
> > Does that mean that the function will be called multiple times with
> > the same "parent_hub", or something else.
>
> It is called with a different "parent_hub", however for root hubs the
> DT node is the same for both root hubs (it's the DT node of the
> controller since there are no dedicated nodes for the root hubs).
>
> Just to make sure this isn't the source of the confusion: the root hubs
> are part of the USB controller, not 'external' hubs which are directly
> connected to the controller. I call the latter 'first level hubs'.
>
> > Unless it's called with the same "parent_hub" then it seems like if
> > the USB device has a device tree node and that device tree node is for
> > a onboard_usb_hub and there's no companion node then we _always_ want
> > to create the platform device, don't we? If it is called with the same
> > "parent_hub" then I'm confused how your test does something different
> > the first time the function is called vs. the 2nd.
>
> Let's use an adapted trogdor DT with only a USB 2.x hub as an example:
>
> usb_1_dwc3 {
> dr_mode = "host";
> #address-cells = <1>;
> #size-cells = <0>;
>
> /* 2.x hub on port 1 */
> usb_hub_2_x: hub@1 {
> compatible = "usbbda,5411";
> reg = <1>;
> vdd-supply = <&pp3300_hub>;
> };
> };
>
> 1st call: the 'parent_hub' corresponds to the USB 3.x root hub of
> usb_1_dwc3, the DT node of the hub is 'usb_1_dwc3'. The function
> iterates over the ports, finds usb_hub_2_x, enters the else branch
> (no companion hub), checks that the function was called on behalf
> of the primary controller and creates the pdev.
>
> 2nd call: the 'parent_hub' corresponds to the USB 2.x root hub of
> usb_1_dwc3, the DT node of the hub is also 'usb_1_dwc3'. The function
> iterates over the ports, finds usb_hub_2_x, enters the else branch
> (no companion hub), sees that it is not called on behalf of the
> primary controller and does not create a second (unnecessary) pdev.
>
> Is it clearer now?

Ah, I get it now! Sorry for being so dense... So like this:

Root hubs (those hubs with no parent) are all created with the same
device_node, the one for the controller itself. We don't want to
iterate through the same children multiple times, so we bail right
away if we're detect that `parent_hub` is a root hub and we're not on
the primary HCD. For all other cases the primary and secondary
controllers have distinct device_nodes.

I guess in theory that test could go before the "companion-hub" test,
though I don't see any case where it truly matters...

-Doug