[PATCH v3 3/4] tty: serial: atmel: remove enable/disable clock due to atmel_console_setup()

From: Claudiu Beznea
Date: Thu Jun 16 2022 - 09:59:07 EST


There is no need for clk_prepare_enable() at the beginning of
atmel_console_setup() and clk_disable_unprepare() at the end of
atmel_console_setup() as the clock is already enabled when calling
atmel_console_setup() and its disablement is done at the end
of probe.

Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
---
drivers/tty/serial/atmel_serial.c | 16 ----------------
1 file changed, 16 deletions(-)

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 4cec97fd7241..3a94c2bdda72 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2617,7 +2617,6 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,

static int __init atmel_console_setup(struct console *co, char *options)
{
- int ret;
struct uart_port *port = &atmel_ports[co->index].uart;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
int baud = 115200;
@@ -2630,10 +2629,6 @@ static int __init atmel_console_setup(struct console *co, char *options)
return -ENODEV;
}

- ret = clk_prepare_enable(atmel_ports[co->index].clk);
- if (ret)
- return ret;
-
atmel_uart_writel(port, ATMEL_US_IDR, -1);
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
@@ -2914,17 +2909,6 @@ static int atmel_serial_probe(struct platform_device *pdev)
if (ret)
goto err_add_port;

-#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
- if (uart_console(&atmel_port->uart)
- && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
- /*
- * The serial core enabled the clock for us, so undo
- * the clk_prepare_enable() in atmel_console_setup()
- */
- clk_disable_unprepare(atmel_port->clk);
- }
-#endif
-
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, atmel_port);

--
2.34.1