[PATCH v3 09/13] can: slcan: send the close command to the adapter

[Dario Binacchi]

In case the bitrate has been set via ip tool, this patch changes the
driver to send the close command ("C\r") to the adapter.

Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>

---

(no changes since v2)

Changes in v2:
- Improve the commit message.

 drivers/net/can/slcan.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
index 9bbf8f363f58..82a42cec52d3 100644
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -436,9 +436,20 @@ static int slcan_transmit_cmd(struct slcan *sl, const unsigned char *cmd)
 static int slc_close(struct net_device *dev)
 {
 	struct slcan *sl = netdev_priv(dev);
+	int err;
 
 	spin_lock_bh(&sl->lock);
 	if (sl->tty) {
+		if (sl->can.bittiming.bitrate &&
+		    sl->can.bittiming.bitrate != -1) {
+			spin_unlock_bh(&sl->lock);
+			err = slcan_transmit_cmd(sl, "C\r");
+			spin_lock_bh(&sl->lock);
+			if (err)
+				netdev_warn(dev,
+					    "failed to send close command 'C\\r'\n");
+		}
+
 		/* TTY discipline is running. */
 		clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
 	}
-- 
2.32.0