[PATCH 4/4] ARM: dts: qcom: sdx65-mtp: Enable QPIC NAND support

[Kaushal Kumar]

Enable QPIC NAND devicetree node for Qualcomm SDX65-MTP board.

Signed-off-by: Kaushal Kumar <quic_kaushalk@xxxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-sdx65-mtp.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 5c5fcb0..3628104 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -72,6 +72,21 @@
 	status = "ok";
 };
 
+&qpic_nand {
+	status = "ok";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+		/* ico and efs2 partitions are secured */
+		secure-regions = /bits/ 64 <0x500000 0x500000
+					    0xa00000 0xb00000>;
+	};
+};
+
 &apps_rsc {
 	pmx65-rpmh-regulators {
 		compatible = "qcom,pmx65-rpmh-regulators";
-- 
2.7.4