[PATCH 2/4] ARM: dts: qcom: sdx65: Add QPIC NAND support

[Kaushal Kumar]

Add devicetree node to enable support for QPIC
NAND controller on Qualcomm SDX65 platform.
Since there is no "aon" clock in SDX65, a dummy
clock is provided.

Signed-off-by: Kaushal Kumar <quic_kaushalk@xxxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index d6a6087..a75e9f1 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -37,6 +37,12 @@
 			clock-output-names = "sleep_clk";
 			#clock-cells = <0>;
 		};
+
+		nand_clk_dummy: nand-clk-dummy {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
 	};
 
 	cpus {
@@ -211,6 +217,22 @@
 			status = "disabled";
 		};
 
+		qpic_nand: nand-controller@1b30000 {
+			compatible = "qcom,sdx55-nand";
+			reg = <0x01b30000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>,
+				 <&nand_clk_dummy>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			status = "disabled";
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x01f40000 0x40000>;
-- 
2.7.4