[PATCH v5 0/2] DSS: Add support for DisplayPort

[Rahul T R]

The following series of patches enables DisplayPort on
j721e-evm

v2:
   - use phandle with a parameter to refer clocks insted of
     sub nodes in serdes_wiz node
   - move phy link node to board DTS file

v3:
   - Fix the regulator node name as per the DT spec
   - Use Macro for GPIO type

v4:
   - Move adding of phy link nodes from 2/2 to 1/2, to fix dtbs checks warnings
   - Add leading zeros to align reg property addresses and sizes
   - Add empty ports for mhdp node in dtsi file to fix dtbs checks warnings

v5:
   - Fix a typo in regulator name

boot logs:
   https://gist.githubusercontent.com/ravi-rahul/1bdbc3f77ab381e486c8394650c2e85d/raw/2327c9894c3236950a00f4511ae668ac4399b71e/j7_DP_upstream.log

kernel patch verify report:
   https://gist.githubusercontent.com/ravi-rahul/a982fef3fae03ec0dbdd5cb475a4cb25/raw/9ef482f96fa351cff7980e4340e9bcb8471ec3ab/report-kernel-patch-verify.txt

Tomi Valkeinen (2):
  arm64: dts: ti: k3-j721e-*: add DP & DP PHY
  arm64: dts: ti: k3-j721e-common-proc-board: add DP to j7 evm

 .../dts/ti/k3-j721e-common-proc-board.dts     | 77 ++++++++++++++++++-
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 75 +++++++++++++++++-
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts        | 16 ++++
 3 files changed, 162 insertions(+), 6 deletions(-)

-- 
2.17.1