[PATCH 5.15 12/33] spi: cadence-quadspi: fix write completion support

From: Greg Kroah-Hartman
Date: Fri Apr 29 2022 - 06:43:39 EST


From: Dinh Nguyen <dinguyen@xxxxxxxxxx>

commit 98d948eb833104a094517401ed8be26ba3ce9935 upstream.

Some versions of the Cadence QSPI controller does not have the write
completion register implemented(CQSPI_REG_WR_COMPLETION_CTRL). On the
Intel SoCFPGA platform the CQSPI_REG_WR_COMPLETION_CTRL register is
not configured.

Add a quirk to not write to the CQSPI_REG_WR_COMPLETION_CTRL register.

Fixes: 9cb2ff111712 ("spi: cadence-quadspi: Disable Auto-HW polling)
Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx>
Reviewed-by: Pratyush Yadav <p.yadav@xxxxxx>
Link: https://lore.kernel.org/r/20211108200854.3616121-1-dinguyen@xxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
[IA: backported for linux=5.15.y]
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/spi/spi-cadence-quadspi.c | 24 +++++++++++++++++++++---
1 file changed, 21 insertions(+), 3 deletions(-)

--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -36,6 +36,7 @@
/* Quirks */
#define CQSPI_NEEDS_WR_DELAY BIT(0)
#define CQSPI_DISABLE_DAC_MODE BIT(1)
+#define CQSPI_NO_SUPPORT_WR_COMPLETION BIT(3)

/* Capabilities */
#define CQSPI_SUPPORTS_OCTAL BIT(0)
@@ -83,6 +84,7 @@ struct cqspi_st {
u32 wr_delay;
bool use_direct_mode;
struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT];
+ bool wr_completion;
};

struct cqspi_driver_platdata {
@@ -797,9 +799,11 @@ static int cqspi_write_setup(struct cqsp
* polling on the controller's side. spinand and spi-nor will take
* care of polling the status register.
*/
- reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
- reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL;
- writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
+ if (cqspi->wr_completion) {
+ reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
+ reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL;
+ writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL);
+ }

reg = readl(reg_base + CQSPI_REG_SIZE);
reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
@@ -1532,6 +1536,10 @@ static int cqspi_probe(struct platform_d

cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk);
master->max_speed_hz = cqspi->master_ref_clk_hz;
+
+ /* write completion is supported by default */
+ cqspi->wr_completion = true;
+
ddata = of_device_get_match_data(dev);
if (ddata) {
if (ddata->quirks & CQSPI_NEEDS_WR_DELAY)
@@ -1541,6 +1549,8 @@ static int cqspi_probe(struct platform_d
master->mode_bits |= SPI_RX_OCTAL | SPI_TX_OCTAL;
if (!(ddata->quirks & CQSPI_DISABLE_DAC_MODE))
cqspi->use_direct_mode = true;
+ if (ddata->quirks & CQSPI_NO_SUPPORT_WR_COMPLETION)
+ cqspi->wr_completion = false;
}

ret = devm_request_irq(dev, irq, cqspi_irq_handler, 0,
@@ -1649,6 +1659,10 @@ static const struct cqspi_driver_platdat
.quirks = CQSPI_DISABLE_DAC_MODE,
};

+static const struct cqspi_driver_platdata socfpga_qspi = {
+ .quirks = CQSPI_NO_SUPPORT_WR_COMPLETION,
+};
+
static const struct of_device_id cqspi_dt_ids[] = {
{
.compatible = "cdns,qspi-nor",
@@ -1666,6 +1680,10 @@ static const struct of_device_id cqspi_d
.compatible = "intel,lgm-qspi",
.data = &intel_lgm_qspi,
},
+ {
+ .compatible = "intel,socfpga-qspi",
+ .data = (void *)&socfpga_qspi,
+ },
{ /* end of table */ }
};