Re: [PATCH v4,1/3] dt-bindings: display: mediatek: dsi: Convert dsi_dtbinding to .yaml

[Rex-BC Chen]

On Wed, 2022-04-13 at 16:20 -0500, Rob Herring wrote:
> On Sat, Apr 09, 2022 at 05:11:52PM +0800, xinlei.lee@xxxxxxxxxxxx
> wrote:
> > From: Xinlei Lee <xinlei.lee@xxxxxxxxxxxx>
> > 
> > Convert mediatek,dsi.txt to mediatek,dsi.yaml format
> > 
> > Signed-off-by: Xinlei Lee <xinlei.lee@xxxxxxxxxxxx>
> > ---
> >  .../display/mediatek/mediatek,dsi.txt         |  62 ---------
> >  .../display/mediatek/mediatek,dsi.yaml        | 118
> > ++++++++++++++++++
> >  2 files changed, 118 insertions(+), 62 deletions(-)
> >  delete mode 100644
> > Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> >  create mode 100644
> > Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yam
> > l
> 
> 
> > diff --git
> > a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.y
> > aml
> > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.y
> > aml
> > new file mode 100644
> > index 000000000000..431bb981394f
> > --- /dev/null
> > +++
> > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.y
> > aml
> > @@ -0,0 +1,118 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: 
> > http://devicetree.org/schemas/display/mediatek/mediatek,dsi.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MediaTek DSI Controller Device Tree Bindings
> > +
> > +maintainers:
> > +  - CK Hu <ck.hu@xxxxxxxxxxxx>
> > +  - Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> > +  - Xinlei Lee <xinlei.lee@xxxxxxxxxxxx>
> > +
> > +description: |
> > +  The MediaTek DSI function block is a sink of the display
> > subsystem and can
> > +  drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized
> > for dual-
> > +  channel output.
> 
> allOf:
>   - $ref: /schemas/display/dsi-controller.yaml#
> 

Hello Rob,

Thanks for your review.

I will help Xinlei to push next version.
I will add this in next version.

> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - mediatek,mt2701-dsi
> > +      - mediatek,mt7623-dsi
> > +      - mediatek,mt8167-dsi
> > +      - mediatek,mt8173-dsi
> > +      - mediatek,mt8183-dsi
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: Engine Clock
> > +      - description: Digital Clock
> > +      - description: HS Clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: engine
> > +      - const: digital
> > +      - const: hs
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  phys:
> > +    maxItems: 1
> > +
> > +  phy-names:
> > +    items:
> > +      - const: dphy
> > +
> > +  port:
> > +    $ref: /schemas/graph.yaml#/properties/port
> > +    description:
> > +      Output port node. This port should be connected to the input
> > +      port of an attached DSI panel or DSI-to-eDP encoder chip.
> > +
> > +
> > +  "#address-cells":
> > +    const: 2
> > +
> > +  "#size-cells":
> > +    const: 2
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - power-domains
> > +  - clocks
> > +  - clock-names
> > +  - phys
> > +  - phy-names
> > +  - port
> > +
> > +additionalProperties: false
> 
> with the above,
> 
> unevaluatedProperties: false
> 

OK, I will modify additionalProperties to unevaluatedProperties in next
version.

BRs,
Rex
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/mt8183-clk.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/power/mt8183-power.h>
> > +    #include <dt-bindings/phy/phy.h>
> > +    #include <dt-bindings/reset/mt8183-resets.h>
> > +
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        dsi0: dsi@14014000 {
> > +            compatible = "mediatek,mt8183-dsi";
> > +            reg = <0 0x14014000 0 0x1000>;
> > +            interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
> > +            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> > +            clocks = <&mmsys CLK_MM_DSI0_MM>,
> > +                <&mmsys CLK_MM_DSI0_IF>,
> > +                <&mipi_tx0>;
> > +            clock-names = "engine", "digital", "hs";
> > +            resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
> > +            phys = <&mipi_tx0>;
> > +            phy-names = "dphy";
> > +            port {
> > +                dsi0_out: endpoint {
> > +                    remote-endpoint = <&panel_in>;
> > +                };
> > +            };
> > +        };
> > +    };
> > +
> > +...
> > -- 
> > 2.18.0
> > 
> >