RE: [EXT] Re: [PATCH] media: amphion: ensure the buffer count is not less than min_buffer

[Ming Qian]

> From: Hans Verkuil [mailto:hverkuil-cisco@xxxxxxxxx]
> Sent: Wednesday, April 27, 2022 2:38 PM
> To: Ming Qian <ming.qian@xxxxxxx>; mchehab@xxxxxxxxxx;
> shawnguo@xxxxxxxxxx
> Cc: robh+dt@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx;
> festevam@xxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>; Aisheng Dong
> <aisheng.dong@xxxxxxx>; linux-media@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Subject: [EXT] Re: [PATCH] media: amphion: ensure the buffer count is not less
> than min_buffer
> 
> Caution: EXT Email
> 
> Hi Ming Qian,
> 
> On 22/03/2022 09:28, Ming Qian wrote:
> > the output buffer count should >= min_buffer_out the capture buffer
> > count should >= min_buffer_cap
> >
> > Signed-off-by: Ming Qian <ming.qian@xxxxxxx>
> > ---
> >  drivers/media/platform/amphion/vpu_v4l2.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/media/platform/amphion/vpu_v4l2.c
> > b/drivers/media/platform/amphion/vpu_v4l2.c
> > index cbf3315605a9..72a0544f4da3 100644
> > --- a/drivers/media/platform/amphion/vpu_v4l2.c
> > +++ b/drivers/media/platform/amphion/vpu_v4l2.c
> > @@ -355,6 +355,10 @@ static int vpu_vb2_queue_setup(struct vb2_queue
> *vq,
> >               return 0;
> >       }
> >
> > +     if (V4L2_TYPE_IS_OUTPUT(vq->type))
> > +             *buf_count = max_t(unsigned int, *buf_count,
> inst->min_buffer_out);
> > +     else
> > +             *buf_count = max_t(unsigned int, *buf_count,
> > + inst->min_buffer_cap);
> 
> I noticed that min_buffer_out/cap is set to 2, but min_buffers_needed is set to
> 1. Wouldn't it make more sense to set min_buffers_needed to
> 2 as well?
> 
> If you do that, then the vb2 core will already take care of ensuring that the
> buf_count is adjusted.
> 
> If you *do* have to do this manually, then you need to place the whole if-else
> under 'if (!*num_planes) {', otherwise it will mess up the VIDIOC_CREATE_BUFS
> ioctl. See the queue_setup in include/media/videobuf2-core.h documentation
> for the sordid details.
> 
> Regards,
> 
>         Hans
> 

Hi Hans,
    I want to make the vpu start when 1 frames is queued, so I set the min_buffers_needed to 1.
And the min_buffer_cap may be changed when a source change event is triggered. So in most case, it will be larger than 2.
    I'll make a v2 patch that place the whole if-else under 'if (!*num_planes) {'
    Thanks for your reminder

Ming

> >       *plane_count = cur_fmt->num_planes;
> >       for (i = 0; i < cur_fmt->num_planes; i++)
> >               psize[i] = cur_fmt->sizeimage[i];