Re: [PATCH v3 1/2] extcon: ptn5150: add queue work sync before driver release

[Chanwoo Choi]

On 22. 4. 19. 21:44, Li Jun wrote:
> Add device managed action to sync pending queue work, otherwise
> the queued work may run after the work is destroyed.
>
> Fixes: 4ed754de2d66 ("extcon: Add support for ptn5150 extcon driver")
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> Signed-off-by: Li Jun <jun.li@xxxxxxx>
> ---
> change for v3:
> - Add Fixes and R-b tag.
>
>   drivers/extcon/extcon-ptn5150.c | 11 +++++++++++
>   1 file changed, 11 insertions(+)
>
> diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
> index 5b9a3cf8df26..2a7874108df8 100644
> --- a/drivers/extcon/extcon-ptn5150.c
> +++ b/drivers/extcon/extcon-ptn5150.c
> @@ -194,6 +194,13 @@ static int ptn5150_init_dev_type(struct ptn5150_info *info)
>   	return 0;
>   }
>   
> +static void ptn5150_work_sync_and_put(void *data)
> +{
> +	struct ptn5150_info *info = data;
> +
> +	cancel_work_sync(&info->irq_work);
> +}
> +
>   static int ptn5150_i2c_probe(struct i2c_client *i2c)
>   {
>   	struct device *dev = &i2c->dev;
> @@ -284,6 +291,10 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c)
>   	if (ret)
>   		return -EINVAL;
>   
> +	ret = devm_add_action_or_reset(dev, ptn5150_work_sync_and_put, info);
> +	if (ret)
> +		return ret;
> +
>   	/*
>   	 * Update current extcon state if for example OTG connection was there
>   	 * before the probe

Applied them. Thanks.

--
Best Regards,
Samsung Electronics
Chanwoo Choi