[PATCH v1 4/4] spidev: Replace OF specific code by device property API

[Andy Shevchenko]

Instead of calling the OF specific APIs, use device property ones.

It also prevents misusing PRP0001 in ACPI when trying to instantiate
spidev directly. We only support special SPI test devices there.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/spi/spidev.c | 45 ++++++++++++++++++++++----------------------
 1 file changed, 22 insertions(+), 23 deletions(-)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 13dea81b21be..ffa124665cf3 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -20,8 +20,6 @@
 #include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/compat.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spidev.h>
@@ -695,20 +693,31 @@ static const struct spi_device_id spidev_spi_ids[] = {
 };
 MODULE_DEVICE_TABLE(spi, spidev_spi_ids);
 
-#ifdef CONFIG_OF
+/*
+ * spidev should never be referenced in DT without a specific compatible string,
+ * it is a Linux implementation thing rather than a description of the hardware.
+ */
+static int spidev_of_check(struct device *dev)
+{
+	if (device_property_match_string(dev, "compatible", "spidev") < 0)
+		return 0;
+
+	dev_err(dev, "spidev listed directly in DT is not supported\n");
+	return -EINVAL;
+}
+
 static const struct of_device_id spidev_dt_ids[] = {
-	{ .compatible = "rohm,dh2228fv" },
-	{ .compatible = "lineartechnology,ltc2488" },
-	{ .compatible = "semtech,sx1301" },
-	{ .compatible = "lwn,bk4" },
-	{ .compatible = "dh,dhcom-board" },
-	{ .compatible = "menlo,m53cpld" },
-	{ .compatible = "cisco,spi-petra" },
-	{ .compatible = "micron,spi-authenta" },
+	{ .compatible = "rohm,dh2228fv", .data = &spidev_of_check },
+	{ .compatible = "lineartechnology,ltc2488", .data = &spidev_of_check },
+	{ .compatible = "semtech,sx1301", .data = &spidev_of_check },
+	{ .compatible = "lwn,bk4", .data = &spidev_of_check },
+	{ .compatible = "dh,dhcom-board", .data = &spidev_of_check },
+	{ .compatible = "menlo,m53cpld", .data = &spidev_of_check },
+	{ .compatible = "cisco,spi-petra", .data = &spidev_of_check },
+	{ .compatible = "micron,spi-authenta", .data = &spidev_of_check },
 	{},
 };
 MODULE_DEVICE_TABLE(of, spidev_dt_ids);
-#endif
 
 /* Dummy SPI devices not to be used in production systems */
 static int spidev_acpi_check(struct device *dev)
@@ -740,16 +749,6 @@ static int spidev_probe(struct spi_device *spi)
 	int			status;
 	unsigned long		minor;
 
-	/*
-	 * spidev should never be referenced in DT without a specific
-	 * compatible string, it is a Linux implementation thing
-	 * rather than a description of the hardware.
-	 */
-	if (spi->dev.of_node && of_device_is_compatible(spi->dev.of_node, "spidev")) {
-		dev_err(&spi->dev, "spidev listed directly in DT is not supported\n");
-		return -EINVAL;
-	}
-
 	match = device_get_match_data(&spi->dev);
 	if (match) {
 		status = match(&spi->dev);
@@ -824,7 +823,7 @@ static void spidev_remove(struct spi_device *spi)
 static struct spi_driver spidev_spi_driver = {
 	.driver = {
 		.name =		"spidev",
-		.of_match_table = of_match_ptr(spidev_dt_ids),
+		.of_match_table = spidev_dt_ids,
 		.acpi_match_table = spidev_acpi_ids,
 	},
 	.probe =	spidev_probe,
-- 
2.35.1