Re: [PATCH v2] virtio: pci: sanity check bar indexes

From: Keir Fraser
Date: Wed Mar 23 2022 - 09:22:08 EST


On Wed, Mar 23, 2022 at 08:01:42AM -0400, Michael S. Tsirkin wrote:
> On Wed, Mar 23, 2022 at 03:57:59PM +0800, Jason Wang wrote:
> > On Tue, Mar 22, 2022 at 11:20 PM Keir Fraser <keirf@xxxxxxxxxx> wrote:
> > >
> > > The bar index is used as an index into the device's resource list
> > > and should be checked as within range for a standard bar.
> > >
> > > Also clean up an existing check to consistently use PCI_STD_NUM_BARS.
> > >
> > > Signed-off-by: Keir Fraser <keirf@xxxxxxxxxx>
> > > ---
> > > drivers/virtio/virtio_pci_modern.c | 10 ++++++++--
> > > drivers/virtio/virtio_pci_modern_dev.c | 8 +++++++-
> > > 2 files changed, 15 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c
> > > index 5455bc041fb6..84bace98dff5 100644
> > > --- a/drivers/virtio/virtio_pci_modern.c
> > > +++ b/drivers/virtio/virtio_pci_modern.c
> > > @@ -293,7 +293,7 @@ static int virtio_pci_find_shm_cap(struct pci_dev *dev, u8 required_id,
> > >
> > > for (pos = pci_find_capability(dev, PCI_CAP_ID_VNDR); pos > 0;
> > > pos = pci_find_next_capability(dev, pos, PCI_CAP_ID_VNDR)) {
> > > - u8 type, cap_len, id;
> > > + u8 type, cap_len, id, res_bar;
> > > u32 tmp32;
> > > u64 res_offset, res_length;
> > >
> > > @@ -317,7 +317,12 @@ static int virtio_pci_find_shm_cap(struct pci_dev *dev, u8 required_id,
> > >
> > > /* Type, and ID match, looks good */
> > > pci_read_config_byte(dev, pos + offsetof(struct virtio_pci_cap,
> > > - bar), bar);
> > > + bar), &res_bar);
> > > + if (res_bar >= PCI_STD_NUM_BARS) {
> > > + dev_err(&dev->dev, "%s: shm cap with bad bar: %d\n",
> > > + __func__, res_bar);
> > > + continue;
> > > + }
> > >
> > > /* Read the lower 32bit of length and offset */
> > > pci_read_config_dword(dev, pos + offsetof(struct virtio_pci_cap,
>
> In fact, the spec says such BAR values are reserved, not bad, so
> the capabiluty should be ignored, they should not cause the driver to error out
> or print errors.

Ah yes, so I see. It makes sense then to silently ignore the capability and print nothing.
I will fix it.

> > > @@ -337,6 +342,7 @@ static int virtio_pci_find_shm_cap(struct pci_dev *dev, u8 required_id,
> > > length_hi), &tmp32);
> > > res_length |= ((u64)tmp32) << 32;
> > >
> > > + *bar = res_bar;
> > > *offset = res_offset;
> > > *len = res_length;
> > >
> > > diff --git a/drivers/virtio/virtio_pci_modern_dev.c b/drivers/virtio/virtio_pci_modern_dev.c
> > > index e8b3ff2b9fbc..a6911d1e212a 100644
> > > --- a/drivers/virtio/virtio_pci_modern_dev.c
> > > +++ b/drivers/virtio/virtio_pci_modern_dev.c
> > > @@ -35,6 +35,12 @@ vp_modern_map_capability(struct virtio_pci_modern_device *mdev, int off,
> > > pci_read_config_dword(dev, off + offsetof(struct virtio_pci_cap, length),
> > > &length);
> > >
> > > + if (bar >= PCI_STD_NUM_BARS) {
> > > + dev_err(&dev->dev,
> > > + "virtio_pci: bad capability bar %u\n", bar);
>
> In fact, I would say the issue is less that bar is reserved.
> The real issue is that the value apparently changed since
> we read it the first time. I think it's a good idea to
> reflect that in the message. Maybe find_capability should return
> the capability structure so we don't need to re-read it from
> the device?

I will have a look and fix it up one way or the other, and respin
this patch.

Thanks,
Keir

> > > + return NULL;
> > > + }
> > > +
> > > if (length <= start) {
> > > dev_err(&dev->dev,
> > > "virtio_pci: bad capability len %u (>%u expected)\n",
> > > @@ -120,7 +126,7 @@ static inline int virtio_pci_find_capability(struct pci_dev *dev, u8 cfg_type,
> > > &bar);
> > >
> > > /* Ignore structures with reserved BAR values */
> > > - if (bar > 0x5)
> > > + if (bar >= PCI_STD_NUM_BARS)
> > > continue;
> >
> > Just notice that the spec said:
> >
> > "
> > values 0x0 to 0x5 specify a Base Address register (BAR) belonging to
> > the function located beginning at 10h in PCI Configuration Space and
> > used to map the structure into Memory or I/O Space. The BAR is
> > permitted to be either 32-bit or 64-bit, it can map Memory Space or
> > I/O Space.
> >
> > Any other value is reserved for future use.
> > "
> > So we probably need to stick 0x5 instead of 0x6 (PCI_STD_NUM_BARS) for
> > this and other places.
> >
> > Thanks
>
> It does not matter much IMHO, the reason spec uses 0 to 0x5 is precisely
> because that's the standard number of BARs. Both ways work as long as we
> are consistent, and I guess PCI_STD_NUM_BARS might be preferable since
> people tend to copy paste values.
>
> > >
> > > if (type == cfg_type) {
> > > --
> > > 2.35.1.894.gb6a874cedc-goog
> > >
>