Re: [Patch v1 2/3] arm64: tegra: add node for tegra234 cpufreq

[Sumit Gupta]

> > Adding cclpex node to represent Tegra234 cpufreq.
> > Tegra234 uses some of the CRAB (Control Register Access Bus)
> > registers for cpu frequency requests. These registers are
> > memory mapped to CCPLEX_MMCRAB_ARM region. In this node, mapping
> > the range of MMCRAB registers required only for cpu frequency info.
> >
> > Signed-off-by: Sumit Gupta <sumitg@xxxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/nvidia/tegra234.dtsi | 7 +++++++
> >   1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi 
> > b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
> > index aaace605bdaa..610207f3f967 100644
> > --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
> > +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
> > @@ -1258,6 +1258,13 @@
> >           };
> >       };
> > +    ccplex@e000000 {
> > +        compatible = "nvidia,tegra234-ccplex-cluster";
> > +        reg = <0x0 0x0e000000 0x0 0x5ffff>;
> > +        nvidia,bpmp = <&bpmp>;
> > +        status = "okay";
> > +    };
> > +
> >       sram@40000000 {
> >           compatible = "nvidia,tegra234-sysram", "mmio-sram";
> >           reg = <0x0 0x40000000 0x0 0x80000>;
>
>
> We need to add this compatible string to a DT binding doc somewhere.
It seems the binding doc was previously posted in [1] for T186 SoC.
Same will be applicable for T234 SoC also. Only compatible string need 
to be added.
Should I sent a separate patch after converting it to yaml format and 
add compatible string (or) send as part of v2.

[1] https://lkml.org/lkml/2017/4/3/324

> Cheers
> Jon