Re: [PATCH 1/2] arm64: dts: ti: k3-*: Fix whitespace around flash@0 nodes

[Apurva Nandan]

On 17/02/22 23:40, Pratyush Yadav wrote:
> The OSPI flash nodes are missing a space before the opening brace. Fix
> that.
>
> Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx>

Reviewed-by: Apurva Nandan<a-nandan@xxxxxx>

> ---
>
> Only compile-tested.
>
>   arch/arm64/boot/dts/ti/k3-am642-evm.dts               | 2 +-
>   arch/arm64/boot/dts/ti/k3-am642-sk.dts                | 2 +-
>   arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi           | 2 +-
>   arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 2 +-
>   arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi           | 2 +-
>   5 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> index e94ae178b1ae..edf80e277267 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> @@ -498,7 +498,7 @@ &ospi0 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&ospi0_pins_default>;
>
> -	flash@0{
> +	flash@0 {
>   		compatible = "jedec,spi-nor";
>   		reg = <0x0>;
>   		spi-tx-bus-width = <8>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> index a9785bec12df..30b956276060 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> @@ -369,7 +369,7 @@ &ospi0 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&ospi0_pins_default>;
>
> -	flash@0{
> +	flash@0 {
>   		compatible = "jedec,spi-nor";
>   		reg = <0x0>;
>   		spi-tx-bus-width = <8>;
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> index 34724440171a..7d819f0db8df 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> @@ -256,7 +256,7 @@ &ospi0 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
>
> -	flash@0{
> +	flash@0 {
>   		compatible = "jedec,spi-nor";
>   		reg = <0x0>;
>   		spi-tx-bus-width = <8>;
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> index 2d7596911b27..2ecc4541f6d8 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> @@ -482,7 +482,7 @@ &ospi1 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
>
> -	flash@0{
> +	flash@0 {
>   		compatible = "jedec,spi-nor";
>   		reg = <0x0>;
>   		spi-tx-bus-width = <1>;
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
> index 2fee2906183d..990dfcd61018 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
> @@ -171,7 +171,7 @@ &ospi0 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
>
> -	flash@0{
> +	flash@0 {
>   		compatible = "jedec,spi-nor";
>   		reg = <0x0>;
>   		spi-tx-bus-width = <8>;
> --
> 2.34.1