Re: [PATCH v8 13/19] drm/mediatek: dpi: Add dpintf support

From: AngeloGioacchino Del Regno
Date: Mon Feb 21 2022 - 09:30:57 EST

Next message: AngeloGioacchino Del Regno: "Re: [PATCH v8 08/19] drm/mediatek: dpi: move dimension mask to board config"
Previous message: Petr Mladek: "Re: [PATCH v2] vsprintf: Fix %pK with kptr_restrict == 0"
In reply to: Maxime Ripard: "Re: [PATCH v8 13/19] drm/mediatek: dpi: Add dpintf support"
Next in thread: Guillaume Ranquet: "[PATCH v8 17/19] drm/mediatek: add hpd debounce"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Il 18/02/22 15:54, Guillaume Ranquet ha scritto:

dpintf is the displayport interface hardware unit. This unit is similar
to dpi and can reuse most of the code.

This patch adds support for mt8195-dpintf to this dpi driver. Main
differences are:
- Some features/functional components are not available for dpintf
which are now excluded from code execution once is_dpintf is set
- dpintf can and needs to choose between different clockdividers based
on the clockspeed. This is done by choosing a different clock parent.
- There are two additional clocks that need to be managed. These are
only set for dpintf and will be set to NULL if not supplied. The
clk_* calls handle these as normal clocks then.
- Some register contents differ slightly between the two components. To
work around this I added register bits/masks with a DPINTF_ prefix
and use them where different.

Based on a separate driver for dpintf created by
Jason-JH.Lin <jason-jh.lin@xxxxxxxxxxxx>.

Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
---
drivers/gpu/drm/mediatek/mtk_dpi.c | 164 +++++++++++++++++---
drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 38 +++++
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 8 +
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 +
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 5 +-
include/linux/soc/mediatek/mtk-mmsys.h | 2 +
6 files changed, 198 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index be99399faf1bb..c5639ada868f8 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -63,6 +63,14 @@ enum mtk_dpi_out_color_format {
MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL
};
+enum TVDPLL_CLK {
+ TVDPLL_PLL = 0,
+ TVDPLL_D2 = 2,
+ TVDPLL_D4 = 4,
+ TVDPLL_D8 = 8,
+ TVDPLL_D16 = 16,
+};
+
struct mtk_dpi {
struct drm_encoder encoder;
struct drm_bridge bridge;
@@ -71,8 +79,10 @@ struct mtk_dpi {
void __iomem *regs;
struct device *dev;
struct clk *engine_clk;
+ struct clk *dpi_ck_cg;
struct clk *pixel_clk;
struct clk *tvd_clk;
+ struct clk *pclk_src[5];
int irq;
struct drm_display_mode mode;
const struct mtk_dpi_conf *conf;
@@ -126,6 +136,7 @@ struct mtk_dpi_conf {
const u32 *output_fmts;
u32 num_output_fmts;
bool is_ck_de_pol;
+ bool is_dpintf;
bool swap_input_support;
// Mask used for HWIDTH, HPORCH, VSYNC_WIDTH and VSYNC_PORCH (no shift)
u32 dimension_mask;
@@ -384,6 +395,25 @@ static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi)
mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN);
}
+static void mtk_dpi_matrix_sel(struct mtk_dpi *dpi, enum mtk_dpi_out_color_format format)
+{
+ u32 matrix_sel = 0;
+
+ switch (format) {
+ case MTK_DPI_COLOR_FORMAT_YCBCR_422:
+ case MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL:
+ case MTK_DPI_COLOR_FORMAT_YCBCR_444:
+ case MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL:
+ case MTK_DPI_COLOR_FORMAT_XV_YCC:
+ if (dpi->mode.hdisplay <= 720)
+ matrix_sel = 0x2;
+ break;
+ default:
+ break;
+ }
+ mtk_dpi_mask(dpi, DPI_MATRIX_SET, matrix_sel, INT_MATRIX_SEL_MASK);
+}
+
static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
enum mtk_dpi_out_color_format format)
{
@@ -391,6 +421,7 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
(format == MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL)) {
mtk_dpi_config_yuv422_enable(dpi, false);
mtk_dpi_config_csc_enable(dpi, true);
+ mtk_dpi_matrix_sel(dpi, format);
if (dpi->conf->swap_input_support)
mtk_dpi_config_swap_input(dpi, false);
mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_BGR);
@@ -398,6 +429,7 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
(format == MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL)) {
mtk_dpi_config_yuv422_enable(dpi, true);
mtk_dpi_config_csc_enable(dpi, true);
+ mtk_dpi_matrix_sel(dpi, format);
if (dpi->conf->swap_input_support)
mtk_dpi_config_swap_input(dpi, true);
mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_RGB);
@@ -438,6 +470,8 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi)
mtk_dpi_disable(dpi);
clk_disable_unprepare(dpi->pixel_clk);
clk_disable_unprepare(dpi->engine_clk);
+ clk_disable_unprepare(dpi->dpi_ck_cg);
+ clk_disable_unprepare(dpi->tvd_clk);
}
static int mtk_dpi_power_on(struct mtk_dpi *dpi)
@@ -447,12 +481,24 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
if (++dpi->refcount != 1)
return 0;
+ ret = clk_prepare_enable(dpi->tvd_clk);
+ if (ret) {
+ dev_err(dpi->dev, "Failed to enable tvd pll: %d\n", ret);
+ goto err_pixel;
+ }
+
ret = clk_prepare_enable(dpi->engine_clk);
if (ret) {
dev_err(dpi->dev, "Failed to enable engine clock: %d\n", ret);
goto err_refcount;
}
+ ret = clk_prepare_enable(dpi->dpi_ck_cg);
+ if (ret) {
+ dev_err(dpi->dev, "Failed to enable dpi_ck_cg clock: %d\n", ret);
+ goto err_ck_cg;
+ }
+
ret = clk_prepare_enable(dpi->pixel_clk);
if (ret) {
dev_err(dpi->dev, "Failed to enable pixel clock: %d\n", ret);
@@ -462,10 +508,11 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
if (dpi->pinctrl && dpi->pins_dpi)
pinctrl_select_state(dpi->pinctrl, dpi->pins_dpi);
- mtk_dpi_enable(dpi);
return 0;
err_pixel:
+ clk_disable_unprepare(dpi->dpi_ck_cg);
+err_ck_cg:
clk_disable_unprepare(dpi->engine_clk);
err_refcount:
dpi->refcount--;
@@ -497,12 +544,21 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
pll_rate = clk_get_rate(dpi->tvd_clk);
vm.pixelclock = pll_rate / factor;
- if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
- (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE))
+ if (dpi->conf->is_dpintf) {
+ if (factor == 1)
+ clk_set_parent(dpi->pixel_clk, dpi->pclk_src[2]);
+ else if (factor == 2)
+ clk_set_parent(dpi->pixel_clk, dpi->pclk_src[3]);
+ else if (factor == 4)
+ clk_set_parent(dpi->pixel_clk, dpi->pclk_src[4]);
+ else
+ clk_set_parent(dpi->pixel_clk, dpi->pclk_src[2]);
+ } else if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
+ (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE)) {
clk_set_rate(dpi->pixel_clk, vm.pixelclock * 2);
- else
+ } else {
clk_set_rate(dpi->pixel_clk, vm.pixelclock);
-
+ }
vm.pixelclock = clk_get_rate(dpi->pixel_clk);
@@ -515,9 +571,15 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING;
dpi_pol.vsync_pol = vm.flags & DISPLAY_FLAGS_VSYNC_HIGH ?
MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING;
- hsync.sync_width = vm.hsync_len;
- hsync.back_porch = vm.hback_porch;
- hsync.front_porch = vm.hfront_porch;
+ if (dpi->conf->is_dpintf) {
+ hsync.sync_width = vm.hsync_len / 4;
+ hsync.back_porch = vm.hback_porch / 4;
+ hsync.front_porch = vm.hfront_porch / 4;
+ } else {
+ hsync.sync_width = vm.hsync_len;
+ hsync.back_porch = vm.hback_porch;
+ hsync.front_porch = vm.hfront_porch;
+ }

I would propose the following, instead:

hsync.sync_width = vm.hsync_len;
hsync.back_porch = vm.hback_porch;
hsync.front_porch = vm.hfront_porch;

/*
* For DPINTF, we need to divide everything by 4 because of this,
* that and the other reason.
*/
if (dpi->conf->is_dpintf) {
hsync.sync_width /= 4;
hsync.back_porch /= 4;
hsync.front_porch /= 4;
}

hsync.shift_half_line = false;
vsync_lodd.sync_width = vm.vsync_len;
vsync_lodd.back_porch = vm.vback_porch;
@@ -559,13 +621,20 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
mtk_dpi_config_channel_limit(dpi);
mtk_dpi_config_bit_num(dpi, dpi->bit_num);
mtk_dpi_config_channel_swap(dpi, dpi->channel_swap);
- mtk_dpi_config_yc_map(dpi, dpi->yc_map);
mtk_dpi_config_color_format(dpi, dpi->color_format);
- mtk_dpi_config_2n_h_fre(dpi);
- mtk_dpi_dual_edge(dpi);
- mtk_dpi_config_disable_edge(dpi);
+ if (dpi->conf->is_dpintf) {
+ mtk_dpi_mask(dpi, DPI_CON, DPINTF_INPUT_2P_EN,
+ DPINTF_INPUT_2P_EN);
+ } else {
+ mtk_dpi_config_yc_map(dpi, dpi->yc_map);
+ mtk_dpi_config_2n_h_fre(dpi);
+ mtk_dpi_dual_edge(dpi);
+ mtk_dpi_config_disable_edge(dpi);
+ }
mtk_dpi_sw_reset(dpi, false);
+ mtk_dpi_enable(dpi);
+
return 0;
}
@@ -608,7 +677,6 @@ static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
u32 *input_fmts;
*num_input_fmts = 0;
-

Why are you removing this line? imo, it's fine to have it.

input_fmts = kcalloc(1, sizeof(*input_fmts),
GFP_KERNEL);
if (!input_fmts)
@@ -634,15 +702,18 @@ static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge,
if (dpi->conf->num_output_fmts)
out_bus_format = dpi->conf->output_fmts[0];
- dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
- bridge_state->input_bus_cfg.format,
- bridge_state->output_bus_cfg.format);
+ dev_info(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
+ bridge_state->input_bus_cfg.format,
+ bridge_state->output_bus_cfg.format);

This is definitely debugging information, and has to be kept as such.

dpi->output_fmt = out_bus_format;
dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
- dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
+ if (out_bus_format == MEDIA_BUS_FMT_YUYV8_1X16)
+ dpi->color_format = MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL;
+ else
+ dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
return 0;
}
@@ -687,7 +758,7 @@ mtk_dpi_bridge_mode_valid(struct drm_bridge *bridge,
{
struct mtk_dpi *dpi = bridge_to_dpi(bridge);
- if (mode->clock > dpi->conf->max_clock_khz)
+ if (dpi->conf->max_clock_khz && mode->clock > dpi->conf->max_clock_khz)
return MODE_CLOCK_HIGH;
return MODE_OK;
@@ -801,6 +872,16 @@ static unsigned int mt8183_calculate_factor(int clock)
return 2;
}
+static unsigned int mt8195_dpintf_calculate_factor(int clock)
+{
+ if (clock < 70000)
+ return 4;
+ else if (clock < 200000)
+ return 2;
+ else
+ return 1;
+}
+
static const u32 mt8173_output_fmts[] = {
MEDIA_BUS_FMT_RGB888_1X24,
};
@@ -810,6 +891,12 @@ static const u32 mt8183_output_fmts[] = {
MEDIA_BUS_FMT_RGB888_2X12_BE,
};
+static const u32 mt8195_output_fmts[] = {
+ MEDIA_BUS_FMT_RGB888_1X24,
+ MEDIA_BUS_FMT_YUV8_1X24,
+ MEDIA_BUS_FMT_YUYV8_1X16,
+};
+
static const struct mtk_dpi_yc_limit mtk_dpi_limit = {
.c_bottom = 0x0010,
.c_top = 0x0FE0,
@@ -817,6 +904,13 @@ static const struct mtk_dpi_yc_limit mtk_dpi_limit = {
.y_top = 0x0FE0,
};
+static const struct mtk_dpi_yc_limit mtk_dpintf_limit = {
+ .c_bottom = 0x0000,
+ .c_top = 0xFFF,
+ .y_bottom = 0x0000,
+ .y_top = 0xFFF,
+};
+
static const struct mtk_dpi_conf mt8173_conf = {
.cal_factor = mt8173_calculate_factor,
.reg_h_fre_con = 0xe0,
@@ -882,6 +976,19 @@ static const struct mtk_dpi_conf mt8192_conf = {
.limit = &mtk_dpi_limit,
};
+static const struct mtk_dpi_conf mt8195_dpintf_conf = {
+ .cal_factor = mt8195_dpintf_calculate_factor,
+ .output_fmts = mt8195_output_fmts,
+ .num_output_fmts = ARRAY_SIZE(mt8195_output_fmts),
+ .is_dpintf = true,
+ .dimension_mask = DPINTF_HPW_MASK,
+ .hvsize_mask = DPINTF_HSIZE_MASK,
+ .channel_swap_shift = DPINTF_CH_SWAP,
+ .yuv422_en_bit = DPINTF_YUV422_EN,
+ .csc_enable_bit = DPINTF_CSC_ENABLE,
+ .limit = &mtk_dpintf_limit,
+};
+
static int mtk_dpi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -929,7 +1036,18 @@ static int mtk_dpi_probe(struct platform_device *pdev)
if (IS_ERR(dpi->engine_clk)) {
ret = PTR_ERR(dpi->engine_clk);
if (ret != -EPROBE_DEFER)
- dev_err(dev, "Failed to get engine clock: %d\n", ret);
+ dev_err(dev, "Failed to get engine clock: %d\n",
+ ret);

Why are you breaking this line? It fits! :)

+
+ return ret;
+ }
+
+ dpi->dpi_ck_cg = devm_clk_get_optional(dev, "ck_cg");
+ if (IS_ERR(dpi->dpi_ck_cg)) {
+ ret = PTR_ERR(dpi->dpi_ck_cg);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get dpi ck cg clock: %d\n",
+ ret);

ditto

return ret;
}
@@ -952,6 +1070,11 @@ static int mtk_dpi_probe(struct platform_device *pdev)
return ret;
}
+ dpi->pclk_src[1] = devm_clk_get(dev, "TVDPLL_D2");
+ dpi->pclk_src[2] = devm_clk_get(dev, "TVDPLL_D4");
+ dpi->pclk_src[3] = devm_clk_get(dev, "TVDPLL_D8");
+ dpi->pclk_src[4] = devm_clk_get(dev, "TVDPLL_D16");

if (dpi->conf->is_dpintf) {
dpi->pclk_src[1] = devm_clk_get(.....);
if (IS_ERR(dpi->pclk_src[1]))
return dpi->pclk_src[1];

dpi->pclk_src[2] = ..... (blahblah, etc)
}

or, you can also do (but I'm undecided on that)

if (dpi->conf->is_dpintf) {
for (........) {
dpi->pclk_src[...........
if (IS_ERR....)
return .....
}
}

It's your choice.... as long as you correctly error-check these calls.

Thanks,
Angelo

Next message: AngeloGioacchino Del Regno: "Re: [PATCH v8 08/19] drm/mediatek: dpi: move dimension mask to board config"
Previous message: Petr Mladek: "Re: [PATCH v2] vsprintf: Fix %pK with kptr_restrict == 0"
In reply to: Maxime Ripard: "Re: [PATCH v8 13/19] drm/mediatek: dpi: Add dpintf support"
Next in thread: Guillaume Ranquet: "[PATCH v8 17/19] drm/mediatek: add hpd debounce"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]