Re: [PATCH v3 4/7] clk: qcom: Add A7 PLL support for SDX65

[Manivannan Sadhasivam]

On Mon, Feb 21, 2022 at 10:52:30AM +0530, Rohit Agarwal wrote:
> Add support for PLL found in Qualcomm SDX65 platforms which is used to
> provide clock to the Cortex A7 CPU via a mux. This PLL can provide high
> frequency clock to the CPU above 1GHz as compared to the other sources
> like GPLL0.
> 
> In this driver, the power domain is attached to the cpudev. This is
> required for CPUFreq functionality and there seems to be no better place
> to do other than this driver (no dedicated CPUFreq driver).
> 

This tells what the driver is doing but not essentially what this patch does
i.e., you need to mention how the SDX65 PLL is added to the driver. Since you
are reusing the existing driver, this needs to be mentioned.

> Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
> ---
>  drivers/clk/qcom/Kconfig  | 6 +++---
>  drivers/clk/qcom/a7-pll.c | 1 +
>  2 files changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 42c8741..5159a1d 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -29,11 +29,11 @@ config QCOM_A53PLL
>  	  devices.
>  
>  config QCOM_A7PLL
> -	tristate "SDX55 A7 PLL"
> +	tristate "A7 PLL driver for SDX55 and SDX65"
>  	help
> -	  Support for the A7 PLL on SDX55 devices. It provides the CPU with
> +	  Support for the A7 PLL on SDX55 and SDX65 devices. It provides the CPU with
>  	  frequencies above 1GHz.
> -	  Say Y if you want to support higher CPU frequencies on SDX55
> +	  Say Y if you want to support higher CPU frequencies on SDX55 and SDX65
>  	  devices.
>  
>  config QCOM_CLK_APCS_MSM8916
> diff --git a/drivers/clk/qcom/a7-pll.c b/drivers/clk/qcom/a7-pll.c
> index c4a53e5..adb2121 100644
> --- a/drivers/clk/qcom/a7-pll.c
> +++ b/drivers/clk/qcom/a7-pll.c
> @@ -84,6 +84,7 @@ static int qcom_a7pll_probe(struct platform_device *pdev)
>  
>  static const struct of_device_id qcom_a7pll_match_table[] = {
>  	{ .compatible = "qcom,sdx55-a7pll" },
> +	{ .compatible = "qcom,sdx65-a7pll" },

I think here also you can just reuse the "qcom,sdx55-a7pll" compatible.

Thanks,
Mani

>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, qcom_a7pll_match_table);
> -- 
> 2.7.4
>