[GIT PULL] SCSI fixes for 5.17-rc4

[James Bottomley]

Three fixes, all in drivers.  The ufs and qedi fixes are minor; the
lpfc one is a bit bigger because it involves adding a heuristic to
detect and deal with common but not standards compliant behaviour.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

The short changelog is:

James Smart (1):
      scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop

Jinyoung Choi (1):
      scsi: ufs: core: Fix divide by zero in ufshcd_map_queues()

Mike Christie (1):
      scsi: qedi: Fix ABBA deadlock in qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp()

And the diffstat:

 drivers/scsi/lpfc/lpfc.h           |  1 +
 drivers/scsi/lpfc/lpfc_attr.c      |  3 +++
 drivers/scsi/lpfc/lpfc_els.c       | 20 +++++++++++++++++++-
 drivers/scsi/lpfc/lpfc_nportdisc.c |  5 +++--
 drivers/scsi/qedi/qedi_fw.c        |  6 ++----
 drivers/scsi/ufs/ufshcd.c          |  2 +-
 6 files changed, 29 insertions(+), 8 deletions(-)

With full diffs below.

James

---

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index a1e0a106c132..98cabe09c040 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -592,6 +592,7 @@ struct lpfc_vport {
 #define FC_VPORT_LOGO_RCVD      0x200    /* LOGO received on vport */
 #define FC_RSCN_DISCOVERY       0x400	 /* Auth all devices after RSCN */
 #define FC_LOGO_RCVD_DID_CHNG   0x800    /* FDISC on phys port detect DID chng*/
+#define FC_PT2PT_NO_NVME        0x1000   /* Don't send NVME PRLI */
 #define FC_SCSI_SCAN_TMO        0x4000	 /* scsi scan timer running */
 #define FC_ABORT_DISCOVERY      0x8000	 /* we want to abort discovery */
 #define FC_NDISC_ACTIVE         0x10000	 /* NPort discovery active */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index bac78fbce8d6..fa8415259cb8 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1315,6 +1315,9 @@ lpfc_issue_lip(struct Scsi_Host *shost)
 	pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK;
 	pmboxq->u.mb.mbxOwner = OWN_HOST;
 
+	if ((vport->fc_flag & FC_PT2PT) && (vport->fc_flag & FC_PT2PT_NO_NVME))
+		vport->fc_flag &= ~FC_PT2PT_NO_NVME;
+
 	mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2);
 
 	if ((mbxstatus == MBX_SUCCESS) &&
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index db5ccae1b63d..f936833c9909 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1072,7 +1072,8 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 
 		/* FLOGI failed, so there is no fabric */
 		spin_lock_irq(shost->host_lock);
-		vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
+		vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP |
+				    FC_PT2PT_NO_NVME);
 		spin_unlock_irq(shost->host_lock);
 
 		/* If private loop, then allow max outstanding els to be
@@ -4607,6 +4608,23 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		/* Added for Vendor specifc support
 		 * Just keep retrying for these Rsn / Exp codes
 		 */
+		if ((vport->fc_flag & FC_PT2PT) &&
+		    cmd == ELS_CMD_NVMEPRLI) {
+			switch (stat.un.b.lsRjtRsnCode) {
+			case LSRJT_UNABLE_TPC:
+			case LSRJT_INVALID_CMD:
+			case LSRJT_LOGICAL_ERR:
+			case LSRJT_CMD_UNSUPPORTED:
+				lpfc_printf_vlog(vport, KERN_WARNING, LOG_ELS,
+						 "0168 NVME PRLI LS_RJT "
+						 "reason %x port doesn't "
+						 "support NVME, disabling NVME\n",
+						 stat.un.b.lsRjtRsnCode);
+				retry = 0;
+				vport->fc_flag |= FC_PT2PT_NO_NVME;
+				goto out_retry;
+			}
+		}
 		switch (stat.un.b.lsRjtRsnCode) {
 		case LSRJT_UNABLE_TPC:
 			/* The driver has a VALID PLOGI but the rport has
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 7d717a4ac14d..fdf5e777bf11 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1961,8 +1961,9 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport,
 			 * is configured try it.
 			 */
 			ndlp->nlp_fc4_type |= NLP_FC4_FCP;
-			if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
-			    (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) {
+			if ((!(vport->fc_flag & FC_PT2PT_NO_NVME)) &&
+			    (vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH ||
+			    vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) {
 				ndlp->nlp_fc4_type |= NLP_FC4_NVME;
 				/* We need to update the localport also */
 				lpfc_nvme_update_localport(vport);
diff --git a/drivers/scsi/qedi/qedi_fw.c b/drivers/scsi/qedi/qedi_fw.c
index 5916ed7662d5..4eb89aa4a39d 100644
--- a/drivers/scsi/qedi/qedi_fw.c
+++ b/drivers/scsi/qedi/qedi_fw.c
@@ -771,11 +771,10 @@ static void qedi_process_cmd_cleanup_resp(struct qedi_ctx *qedi,
 			qedi_cmd->list_tmf_work = NULL;
 		}
 	}
+	spin_unlock_bh(&qedi_conn->tmf_work_lock);
 
-	if (!found) {
-		spin_unlock_bh(&qedi_conn->tmf_work_lock);
+	if (!found)
 		goto check_cleanup_reqs;
-	}
 
 	QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_SCSI_TM,
 		  "TMF work, cqe->tid=0x%x, tmf flags=0x%x, cid=0x%x\n",
@@ -806,7 +805,6 @@ static void qedi_process_cmd_cleanup_resp(struct qedi_ctx *qedi,
 	qedi_cmd->state = CLEANUP_RECV;
 unlock:
 	spin_unlock_bh(&conn->session->back_lock);
-	spin_unlock_bh(&qedi_conn->tmf_work_lock);
 	wake_up_interruptible(&qedi_conn->wait_queue);
 	return;
 
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 50b12d60dc1b..9349557b8a01 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2681,7 +2681,7 @@ static int ufshcd_map_queues(struct Scsi_Host *shost)
 			break;
 		case HCTX_TYPE_READ:
 			map->nr_queues = 0;
-			break;
+			continue;
 		default:
 			WARN_ON_ONCE(true);
 		}