[PATCH V1 2/2] Revert "arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector"

[Souradeep Chowdhury]

Revert all the changes to add the Embedded USB Debugger(EUD) Node
in the device tree, the connector node and also changes to usb2 Node
associated with this.
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 36 ------------------------------------
 1 file changed, 36 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 96917fe..937c2e0 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2583,12 +2583,6 @@
 				phys = <&usb_2_hsphy>;
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
-				usb-role-switch;
-				port {
-					usb2_role_switch: endpoint {
-						remote-endpoint = <&eud_ep>;
-					};
-				};
 			};
 		};
 
@@ -2630,36 +2624,6 @@
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		eud: eud@88e0000 {
-			compatible = "qcom,sc7280-eud","qcom,eud";
-			reg = <0 0x88e0000 0 0x2000>,
-			      <0 0x88e2000 0 0x1000>;
-			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
-			ports {
-				port@0 {
-					eud_ep: endpoint {
-						remote-endpoint = <&usb2_role_switch>;
-					};
-				};
-				port@1 {
-					eud_con: endpoint {
-						remote-endpoint = <&con_eud>;
-					};
-				};
-			};
-		};
-
-		eud_typec: connector {
-			compatible = "usb-c-connector";
-			ports {
-				port@0 {
-					con_eud: endpoint {
-						remote-endpoint = <&eud_con>;
-					};
-				};
-			};
-		};
-
 		nsp_noc: interconnect@a0c0000 {
 			reg = <0 0x0a0c0000 0 0x10000>;
 			compatible = "qcom,sc7280-nsp-noc";
-- 
2.7.4