[PATCH v3 5/6] iio: potentiometer: Add support for Maxim DS3502

[Jagath Jog J]

The DS3502 is a 7-bit, nonvolatile digital potentiometer featuring
an output voltage range of up to 15.5V.
DS3502 support is implemented into existing DS1803 driver.
Datasheet: https://datasheets.maximintegrated.com/en/ds/DS3502.pdf

Signed-off-by: Jagath Jog J <jagathjog1996@xxxxxxxxx>
---
 drivers/iio/potentiometer/Kconfig  |  6 ++--
 drivers/iio/potentiometer/ds1803.c | 46 ++++++++++++++++++++++++------
 2 files changed, 41 insertions(+), 11 deletions(-)

diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
index 832df8da2bc6..79c524640196 100644
--- a/drivers/iio/potentiometer/Kconfig
+++ b/drivers/iio/potentiometer/Kconfig
@@ -27,11 +27,11 @@ config AD5272
 	  module will be called ad5272.
 
 config DS1803
-	tristate "Maxim Integrated DS1803 Digital Potentiometer driver"
+	tristate "Maxim Integrated DS1803 and similar Digital Potentiometer driver"
 	depends on I2C
 	help
-	  Say yes here to build support for the Maxim Integrated DS1803
-	  digital potentiometer chip.
+	  Say yes here to build support for the Maxim Integrated Devices DS1803 and
+	  DS3502 digital potentiometer chip.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ds1803.
diff --git a/drivers/iio/potentiometer/ds1803.c b/drivers/iio/potentiometer/ds1803.c
index ca28ad147402..ca903e9c2816 100644
--- a/drivers/iio/potentiometer/ds1803.c
+++ b/drivers/iio/potentiometer/ds1803.c
@@ -1,12 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Maxim Integrated DS1803 digital potentiometer driver
+ * Maxim Integrated DS1803 and similar digital potentiometer driver
  * Copyright (c) 2016 Slawomir Stepien
+ * Copyright (c) 2022 Jagath Jog J
  *
  * Datasheet: https://datasheets.maximintegrated.com/en/ds/DS1803.pdf
+ * Datasheet: https://datasheets.maximintegrated.com/en/ds/DS3502.pdf
  *
  * DEVID	#Wipers	#Positions	Resistor Opts (kOhm)	i2c address
  * ds1803	2	256		10, 50, 100		0101xxx
+ * ds3502	1	128		10			01010xx
  */
 
 #include <linux/err.h>
@@ -18,11 +21,13 @@
 
 #define DS1803_WIPER_0         0xA9
 #define DS1803_WIPER_1         0xAA
+#define DS3502_WR_IVR          0x00
 
 enum ds1803_type {
 	DS1803_010,
 	DS1803_050,
 	DS1803_100,
+	DS3502,
 };
 
 struct ds1803_cfg {
@@ -36,6 +41,7 @@ struct ds1803_cfg {
 struct ds1803_data {
 	struct i2c_client *client;
 	const struct ds1803_cfg *cfg;
+	enum ds1803_type chip_type;
 };
 
 #define DS1803_CHANNEL(ch, addr) {					\
@@ -54,6 +60,10 @@ static const struct iio_chan_spec ds1803_channels[] = {
 	DS1803_CHANNEL(1, DS1803_WIPER_1),
 };
 
+static const struct iio_chan_spec ds3502_channels[] = {
+	DS1803_CHANNEL(0, DS3502_WR_IVR),
+};
+
 static const struct ds1803_cfg ds1803_cfg[] = {
 	[DS1803_010] = { .wipers = 2, .avail = { 0, 1, 255 }, .kohms =  10,
 			 .channels = ds1803_channels,
@@ -64,6 +74,9 @@ static const struct ds1803_cfg ds1803_cfg[] = {
 	[DS1803_100] = { .wipers = 2, .avail = { 0, 1, 255 }, .kohms = 100,
 			 .channels = ds1803_channels,
 			 .num_channels = ARRAY_SIZE(ds1803_channels) },
+	[DS3502] =     { .wipers = 1, .avail = { 0, 1, 127 }, .kohms =  10,
+			 .channels = ds3502_channels,
+			 .num_channels = ARRAY_SIZE(ds3502_channels) },
 };
 
 static int ds1803_read_raw(struct iio_dev *indio_dev,
@@ -77,13 +90,26 @@ static int ds1803_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		ret = i2c_master_recv(data->client, result,
-				      indio_dev->num_channels);
-		if (ret < 0)
-			return ret;
-
-		*val = result[pot];
-		return IIO_VAL_INT;
+		switch (data->chip_type) {
+		case DS1803_010:
+		case DS1803_050:
+		case DS1803_100:
+			ret = i2c_master_recv(data->client, result,
+					      indio_dev->num_channels);
+			if (ret < 0)
+				return ret;
+			*val = result[pot];
+			return IIO_VAL_INT;
+		case DS3502:
+			ret = i2c_smbus_read_byte_data(data->client,
+						       chan->address);
+			if (ret < 0)
+				return ret;
+			*val = ret;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
 
 	case IIO_CHAN_INFO_SCALE:
 		*val = 1000 * data->cfg->kohms;
@@ -156,6 +182,7 @@ static int ds1803_probe(struct i2c_client *client, const struct i2c_device_id *i
 	if (!data->cfg)
 		data->cfg = &ds1803_cfg[id->driver_data];
 
+	data->chip_type = id->driver_data;
 	indio_dev->info = &ds1803_info;
 	indio_dev->channels = data->cfg->channels;
 	indio_dev->num_channels = data->cfg->num_channels;
@@ -168,6 +195,7 @@ static const struct of_device_id ds1803_dt_ids[] = {
 	{ .compatible = "maxim,ds1803-010", .data = &ds1803_cfg[DS1803_010] },
 	{ .compatible = "maxim,ds1803-050", .data = &ds1803_cfg[DS1803_050] },
 	{ .compatible = "maxim,ds1803-100", .data = &ds1803_cfg[DS1803_100] },
+	{ .compatible = "maxim,ds3502", .data = &ds1803_cfg[DS3502] },
 	{}
 };
 MODULE_DEVICE_TABLE(of, ds1803_dt_ids);
@@ -176,6 +204,7 @@ static const struct i2c_device_id ds1803_id[] = {
 	{ "ds1803-010", DS1803_010 },
 	{ "ds1803-050", DS1803_050 },
 	{ "ds1803-100", DS1803_100 },
+	{ "ds3502", DS3502 },
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, ds1803_id);
@@ -192,5 +221,6 @@ static struct i2c_driver ds1803_driver = {
 module_i2c_driver(ds1803_driver);
 
 MODULE_AUTHOR("Slawomir Stepien <sst@xxxxxxxxx>");
+MODULE_AUTHOR("Jagath Jog J <jagathjog1996@xxxxxxxxx>");
 MODULE_DESCRIPTION("DS1803 digital potentiometer");
 MODULE_LICENSE("GPL v2");
-- 
2.17.1