[PATCH v5 24/34] iommu/mediatek: Just move code position in hw_init

[Yong Wu]

No functional change too, prepare for mt8195 IOMMU support bank functions.
Some global control settings are in bank0 while the other banks have
their bank independent setting. Here only move the global control
settings and the independent registers together.

Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
 drivers/iommu/mtk_iommu.c | 48 +++++++++++++++++++--------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index c068e0c0ebf4..efba08774c52 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -801,30 +801,6 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 	}
 	writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
 
-	regval = F_L2_MULIT_HIT_EN |
-		F_TABLE_WALK_FAULT_INT_EN |
-		F_PREETCH_FIFO_OVERFLOW_INT_EN |
-		F_MISS_FIFO_OVERFLOW_INT_EN |
-		F_PREFETCH_FIFO_ERR_INT_EN |
-		F_MISS_FIFO_ERR_INT_EN;
-	writel_relaxed(regval, data->base + REG_MMU_INT_CONTROL0);
-
-	regval = F_INT_TRANSLATION_FAULT |
-		F_INT_MAIN_MULTI_HIT_FAULT |
-		F_INT_INVALID_PA_FAULT |
-		F_INT_ENTRY_REPLACEMENT_FAULT |
-		F_INT_TLB_MISS_FAULT |
-		F_INT_MISS_TRANSACTION_FIFO_FAULT |
-		F_INT_PRETETCH_TRANSATION_FIFO_FAULT;
-	writel_relaxed(regval, data->base + REG_MMU_INT_MAIN_CONTROL);
-
-	if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_LEGACY_IVRP_PADDR))
-		regval = (data->protect_base >> 1) | (data->enable_4GB << 31);
-	else
-		regval = lower_32_bits(data->protect_base) |
-			 upper_32_bits(data->protect_base);
-	writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR);
-
 	if (data->enable_4GB &&
 	    MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_VLD_PA_RNG)) {
 		/*
@@ -858,6 +834,30 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 	}
 	writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);
 
+	regval = F_L2_MULIT_HIT_EN |
+		F_TABLE_WALK_FAULT_INT_EN |
+		F_PREETCH_FIFO_OVERFLOW_INT_EN |
+		F_MISS_FIFO_OVERFLOW_INT_EN |
+		F_PREFETCH_FIFO_ERR_INT_EN |
+		F_MISS_FIFO_ERR_INT_EN;
+	writel_relaxed(regval, data->base + REG_MMU_INT_CONTROL0);
+
+	regval = F_INT_TRANSLATION_FAULT |
+		F_INT_MAIN_MULTI_HIT_FAULT |
+		F_INT_INVALID_PA_FAULT |
+		F_INT_ENTRY_REPLACEMENT_FAULT |
+		F_INT_TLB_MISS_FAULT |
+		F_INT_MISS_TRANSACTION_FIFO_FAULT |
+		F_INT_PRETETCH_TRANSATION_FIFO_FAULT;
+	writel_relaxed(regval, data->base + REG_MMU_INT_MAIN_CONTROL);
+
+	if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_LEGACY_IVRP_PADDR))
+		regval = (data->protect_base >> 1) | (data->enable_4GB << 31);
+	else
+		regval = lower_32_bits(data->protect_base) |
+			 upper_32_bits(data->protect_base);
+	writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR);
+
 	if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
 			     dev_name(data->dev), (void *)data)) {
 		writel_relaxed(0, data->base + REG_MMU_PT_BASE_ADDR);
-- 
2.18.0