Re: [PATCH 2/2] usb: dwc: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT

[Jun Li]

Pavan Kondeti <quic_pkondeti@xxxxxxxxxxx> 于2022年2月16日周三 16:00写道：
>
> On Wed, Feb 16, 2022 at 03:16:40PM +0800, Jun Li wrote:
> > Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx> 于2022年2月16日周三 14:58写道：
> > >
> > > dwc3 manages PHY by own DRD driver, so skip the management by
> > > HCD core.
> > > During runtime suspend phy was not getting suspend because
> > > runtime_usage value is 2.
> > >
> > > Signed-off-by: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
> > > ---
> > >  drivers/usb/dwc3/host.c | 15 +++++++++++++++
> > >  1 file changed, 15 insertions(+)
> > >
> > > diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
> > > index eda8719..4a035a8 100644
> > > --- a/drivers/usb/dwc3/host.c
> > > +++ b/drivers/usb/dwc3/host.c
> > > @@ -13,6 +13,14 @@
> > >  #include <linux/platform_device.h>
> > >
> > >  #include "core.h"
> > > +#include <linux/usb/hcd.h>
> > > +#include <linux/usb/xhci-plat.h>
> > > +#include <linux/usb/xhci-quirks.h>
> > > +
> > > +
> > > +static const struct xhci_plat_priv xhci_plat_dwc3_xhci = {
> > > +       .quirks = XHCI_SKIP_PHY_INIT,
> > > +};
> >
> > It's better to create this xhci_plat_priv by each dwc3 glue layer,
> > with that, we can use this priv to pass other flags and possibly
> > override APIs by each glue driver which may not apply to all dwc3
> > platforms.
> >
>
> Do you see a need for any glue driver to know about this xHC platform data?

Yes. I have some xhci quirks which are specifix to NXP iMX platforms.

> AFAICT, glue driver has no direction connection with the dwc3 core. All
> the required data is coming from dT on ARM based boards. Adding a private
> interface between dwc3 core and glue for passing xhci platform data seems
> to be overkill. If there is a pressing need, why not?

And looking at xhci_plat_priv members

-struct xhci_plat_priv {
-       const char *firmware_name;
-       unsigned long long quirks;
-       int (*plat_setup)(struct usb_hcd *);
-       void (*plat_start)(struct usb_hcd *);
-       int (*init_quirk)(struct usb_hcd *);
-       int (*suspend_quirk)(struct usb_hcd *);
-       int (*resume_quirk)(struct usb_hcd *);
-};

Are we going to share the same all those quirks and APIs
implementation across all dwc3 platforms?

Thanks
Li Jun
>
> Thanks,
> Pavan