Re: [PATCH v4 5/8] mfd: lpc_ich: Add support for pinctrl in non-ACPI system

[Lee Jones]

On Mon, 31 Jan 2022, Andy Shevchenko wrote:

> From: Tan Jui Nee <jui.nee.tan@xxxxxxxxx>
> 
> Add support for non-ACPI systems, such as system that uses
> Advanced Boot Loader (ABL) whereby a platform device has to be created
> in order to bind with pin control and GPIO.
> 
> At the moment, Intel Apollo Lake In-Vehicle Infotainment (IVI) system
> requires a driver to hide and unhide P2SB to lookup P2SB BAR and pass
> the PCI BAR address to GPIO.
> 
> Signed-off-by: Tan Jui Nee <jui.nee.tan@xxxxxxxxx>
> Co-developed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Acked-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
>  drivers/mfd/lpc_ich.c | 101 +++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 100 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
> index 95dca5434917..e1bca5325ce7 100644
> --- a/drivers/mfd/lpc_ich.c
> +++ b/drivers/mfd/lpc_ich.c
> @@ -8,7 +8,8 @@
>   *  Configuration Registers.
>   *
>   *  This driver is derived from lpc_sch.
> -
> + *
> + *  Copyright (c) 2017, 2021-2022 Intel Corporation
>   *  Copyright (c) 2011 Extreme Engineering Solution, Inc.
>   *  Author: Aaron Sierra <asierra@xxxxxxxxxxx>
>   *
> @@ -42,6 +43,7 @@
>  #include <linux/errno.h>
>  #include <linux/acpi.h>
>  #include <linux/pci.h>
> +#include <linux/pinctrl/pinctrl.h>
>  #include <linux/mfd/core.h>
>  #include <linux/mfd/lpc_ich.h>
>  #include <linux/platform_data/itco_wdt.h>
> @@ -140,6 +142,70 @@ static struct mfd_cell lpc_ich_gpio_cell = {
>  	.ignore_resource_conflicts = true,
>  };
>  
> +#define APL_GPIO_NORTH		0
> +#define APL_GPIO_NORTHWEST	1
> +#define APL_GPIO_WEST		2
> +#define APL_GPIO_SOUTHWEST	3
> +#define APL_GPIO_NR_DEVICES	4
> +
> +/* Offset data for Apollo Lake GPIO controllers */
> +#define APL_GPIO_NORTH_OFFSET		0xc50000
> +#define APL_GPIO_NORTHWEST_OFFSET	0xc40000
> +#define APL_GPIO_WEST_OFFSET		0xc70000
> +#define APL_GPIO_SOUTHWEST_OFFSET	0xc00000
> +
> +#define APL_GPIO_IRQ			14
> +
> +static struct resource apl_gpio_resources[APL_GPIO_NR_DEVICES][2] = {
> +	[APL_GPIO_NORTH] = {
> +		DEFINE_RES_MEM(APL_GPIO_NORTH_OFFSET, 0x1000),

Are these 0x1000's being over-written in lpc_ich_init_pinctrl()?

If so, why pre-initialise?

> +		DEFINE_RES_IRQ(APL_GPIO_IRQ),
> +	},
> +	[APL_GPIO_NORTHWEST] = {
> +		DEFINE_RES_MEM(APL_GPIO_NORTHWEST_OFFSET, 0x1000),
> +		DEFINE_RES_IRQ(APL_GPIO_IRQ),
> +	},
> +	[APL_GPIO_WEST] = {
> +		DEFINE_RES_MEM(APL_GPIO_WEST_OFFSET, 0x1000),
> +		DEFINE_RES_IRQ(APL_GPIO_IRQ),
> +	},
> +	[APL_GPIO_SOUTHWEST] = {
> +		DEFINE_RES_MEM(APL_GPIO_SOUTHWEST_OFFSET, 0x1000),
> +		DEFINE_RES_IRQ(APL_GPIO_IRQ),
> +	},
> +};
> +
> +/* The order must be in sync with apl_pinctrl_soc_data */

Why does the order matter if you've pre-enumerated them all?

> +static const struct mfd_cell apl_gpio_devices[APL_GPIO_NR_DEVICES] = {
> +	[APL_GPIO_NORTH] = {
> +		.name = "apollolake-pinctrl",
> +		.id = APL_GPIO_NORTH,
> +		.num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_NORTH]),
> +		.resources = apl_gpio_resources[APL_GPIO_NORTH],
> +		.ignore_resource_conflicts = true,
> +	},
> +	[APL_GPIO_NORTHWEST] = {
> +		.name = "apollolake-pinctrl",
> +		.id = APL_GPIO_NORTHWEST,
> +		.num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_NORTHWEST]),
> +		.resources = apl_gpio_resources[APL_GPIO_NORTHWEST],
> +		.ignore_resource_conflicts = true,
> +	},
> +	[APL_GPIO_WEST] = {
> +		.name = "apollolake-pinctrl",
> +		.id = APL_GPIO_WEST,
> +		.num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_WEST]),
> +		.resources = apl_gpio_resources[APL_GPIO_WEST],
> +		.ignore_resource_conflicts = true,
> +	},
> +	[APL_GPIO_SOUTHWEST] = {
> +		.name = "apollolake-pinctrl",
> +		.id = APL_GPIO_SOUTHWEST,
> +		.num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_SOUTHWEST]),
> +		.resources = apl_gpio_resources[APL_GPIO_SOUTHWEST],
> +		.ignore_resource_conflicts = true,
> +	},
> +};
>  
>  static struct mfd_cell lpc_ich_spi_cell = {
>  	.name = "intel-spi",
> @@ -1083,6 +1149,33 @@ static int lpc_ich_init_wdt(struct pci_dev *dev)
>  	return ret;
>  }
>  
> +static int lpc_ich_init_pinctrl(struct pci_dev *dev)
> +{
> +	struct resource base;
> +	unsigned int i;
> +	int ret;
> +
> +	/* Check, if GPIO has been exported as an ACPI device */
> +	if (acpi_dev_present("INT3452", NULL, -1))
> +		return -EEXIST;
> +
> +	ret = p2sb_bar(dev->bus, 0, &base);
> +	if (ret)
> +		return ret;
> +
> +	for (i = 0; i < ARRAY_SIZE(apl_gpio_devices); i++) {
> +		struct resource *mem = &apl_gpio_resources[i][0];
> +
> +		/* Fill MEM resource */
> +		mem->start += base.start;
> +		mem->end += base.start;
> +		mem->flags = base.flags;
> +	}
> +
> +	return mfd_add_devices(&dev->dev, 0, apl_gpio_devices,
> +			       ARRAY_SIZE(apl_gpio_devices), NULL, 0, NULL);
> +}
> +
>  static void lpc_ich_test_spi_write(struct pci_dev *dev, unsigned int devfn,
>  				   struct intel_spi_boardinfo *info)
>  {
> @@ -1199,6 +1292,12 @@ static int lpc_ich_probe(struct pci_dev *dev,
>  			cell_added = true;
>  	}
>  
> +	if (priv->chipset == LPC_APL) {
> +		ret = lpc_ich_init_pinctrl(dev);
> +		if (!ret)
> +			cell_added = true;
> +	}
> +
>  	if (lpc_chipset_info[priv->chipset].spi_type) {
>  		ret = lpc_ich_init_spi(dev);
>  		if (!ret)

-- 
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog