[PATCH v3 01/10] ARM: dts: aspeed: bletchley: switch sled numbering to 1-based

From: Potin Lai
Date: Tue Feb 15 2022 - 11:32:24 EST

Next message: Potin Lai: "[PATCH v3 06/10] ARM: dts: aspeed: bletchley: add interrupt support for sled io expander"
Previous message: Potin Lai: "[PATCH v3 03/10] ARM: dts: aspeed: bletchley: update gpio-line-names"
In reply to: Potin Lai: "[PATCH v3 03/10] ARM: dts: aspeed: bletchley: update gpio-line-names"
Next in thread: Potin Lai: "[PATCH v3 06/10] ARM: dts: aspeed: bletchley: add interrupt support for sled io expander"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Switch sled to 1-based to meet OpenBMC multi-host numbering rule

Signed-off-by: Potin Lai <potin.lai@xxxxxxxxxxxx>
---
.../dts/aspeed-bmc-facebook-bletchley.dts | 128 +++++++++---------
1 file changed, 64 insertions(+), 64 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
index f973ea883b97..e77736ed5c4c 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
@@ -101,16 +101,6 @@
default-state = "off";
gpios = <&fan_ioexp 15 GPIO_ACTIVE_HIGH>;
};
- sled0_amber {
- retain-state-shutdown;
- default-state = "off";
- gpios = <&sled0_leds 0 GPIO_ACTIVE_LOW>;
- };
- sled0_blue {
- retain-state-shutdown;
- default-state = "off";
- gpios = <&sled0_leds 1 GPIO_ACTIVE_LOW>;
- };
sled1_amber {
retain-state-shutdown;
default-state = "off";
@@ -161,6 +151,16 @@
default-state = "off";
gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
};
+ sled6_amber {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
+ };
+ sled6_blue {
+ retain-state-shutdown;
+ default-state = "off";
+ gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
+ };
};
};

@@ -219,7 +219,7 @@
reg = <0x4f>;
};

- sled0_ioexp: pca9539@76 {
+ sled1_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
#address-cells = <1>;
@@ -228,13 +228,13 @@
#gpio-cells = <2>;

gpio-line-names =
- "SLED0_MS_DETECT1","SLED0_VBUS_BMC_EN","SLED0_INA230_ALERT","SLED0_P12V_STBY_ALERT",
- "SLED0_SSD_ALERT","SLED0_MS_DETECT0","SLED0_RST_CCG5","SLED0_FUSB302_INT",
- "SLED0_MD_STBY_RESET","SLED0_MD_IOEXP_EN_FAULT","SLED0_MD_DIR","SLED0_MD_DECAY",
- "SLED0_MD_MODE1","SLED0_MD_MODE2","SLED0_MD_MODE3","power-host0";
+ "SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
+ "SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
+ "SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
+ "SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
};

- sled0_leds: pca9552@67 {
+ sled1_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
@@ -243,13 +243,13 @@
#gpio-cells = <2>;

gpio-line-names =
- "led-sled0-amber","led-sled0-blue","SLED0_RST_IOEXP","",
+ "led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","",
"","","","",
"","","","",
"","","","";
};

- sled0_fusb302: typec-portc@22 {
+ sled1_fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;

@@ -282,7 +282,7 @@
reg = <0x4f>;
};

- sled1_ioexp: pca9539@76 {
+ sled2_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
#address-cells = <1>;
@@ -291,13 +291,13 @@
#gpio-cells = <2>;

gpio-line-names =
- "SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
- "SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
- "SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
- "SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
+ "SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
+ "SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
+ "SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
+ "SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
};

- sled1_leds: pca9552@67 {
+ sled2_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
@@ -306,13 +306,13 @@
#gpio-cells = <2>;

gpio-line-names =
- "led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","",
+ "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","",
"","","","",
"","","","",
"","","","";
};

- sled1_fusb302: typec-portc@22 {
+ sled2_fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;

@@ -349,7 +349,7 @@
reg = <0x4f>;
};

- sled2_ioexp: pca9539@76 {
+ sled3_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
#address-cells = <1>;
@@ -358,13 +358,13 @@
#gpio-cells = <2>;

gpio-line-names =
- "SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
- "SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
- "SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
- "SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
+ "SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
+ "SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
+ "SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
+ "SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
};

- sled2_leds: pca9552@67 {
+ sled3_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
@@ -373,13 +373,13 @@
#gpio-cells = <2>;

gpio-line-names =
- "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","",
+ "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","",
"","","","",
"","","","",
"","","","";
};

- sled2_fusb302: typec-portc@22 {
+ sled3_fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;

@@ -412,7 +412,7 @@
reg = <0x4f>;
};

- sled3_ioexp: pca9539@76 {
+ sled4_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
#address-cells = <1>;
@@ -421,13 +421,13 @@
#gpio-cells = <2>;

gpio-line-names =
- "SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
- "SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
- "SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
- "SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
+ "SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
+ "SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
+ "SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
+ "SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
};

- sled3_leds: pca9552@67 {
+ sled4_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
@@ -436,13 +436,13 @@
#gpio-cells = <2>;

gpio-line-names =
- "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","",
+ "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","",
"","","","",
"","","","",
"","","","";
};

- sled3_fusb302: typec-portc@22 {
+ sled4_fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;

@@ -475,7 +475,7 @@
reg = <0x4f>;
};

- sled4_ioexp: pca9539@76 {
+ sled5_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
#address-cells = <1>;
@@ -484,13 +484,13 @@
#gpio-cells = <2>;

gpio-line-names =
- "SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
- "SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
- "SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
- "SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
+ "SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
+ "SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
+ "SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
+ "SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
};

- sled4_leds: pca9552@67 {
+ sled5_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
@@ -499,13 +499,13 @@
#gpio-cells = <2>;

gpio-line-names =
- "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","",
+ "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","",
"","","","",
"","","","",
"","","","";
};

- sled4_fusb302: typec-portc@22 {
+ sled5_fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;

@@ -538,7 +538,7 @@
reg = <0x4f>;
};

- sled5_ioexp: pca9539@76 {
+ sled6_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
#address-cells = <1>;
@@ -547,13 +547,13 @@
#gpio-cells = <2>;

gpio-line-names =
- "SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
- "SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
- "SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
- "SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
+ "SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
+ "SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
+ "SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY",
+ "SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6";
};

- sled5_leds: pca9552@67 {
+ sled6_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
@@ -562,13 +562,13 @@
#gpio-cells = <2>;

gpio-line-names =
- "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","",
+ "led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","",
"","","","",
"","","","",
"","","","";
};

- sled5_fusb302: typec-portc@22 {
+ sled6_fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;

@@ -702,17 +702,17 @@
/*F0-F7*/ "","","","","","","","",
/*G0-G7*/ "","SWITCH_FRU_MUX","","","","","","",
/*H0-H7*/ "presence-riser1","presence-riser2",
- "presence-sled0","presence-sled1",
- "presence-sled2","presence-sled3",
- "presence-sled4","presence-sled5",
+ "presence-sled1","presence-sled2",
+ "presence-sled3","presence-sled4",
+ "presence-sled5","presence-sled6",
/*I0-I7*/ "REV_ID0","","REV_ID1","REV_ID2",
"","","","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","","","","",
- /*M0-M7*/ "ALERT_SLED0","ALERT_SLED1",
- "ALERT_SLED2","ALERT_SLED3",
- "ALERT_SLED4","ALERT_SLED5",
+ /*M0-M7*/ "ALERT_SLED1","ALERT_SLED2",
+ "ALERT_SLED3","ALERT_SLED4",
+ "ALERT_SLED5","ALERT_SLED6",
"P12V_AUX_ALERT1","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","",
--
2.17.1

Next message: Potin Lai: "[PATCH v3 06/10] ARM: dts: aspeed: bletchley: add interrupt support for sled io expander"
Previous message: Potin Lai: "[PATCH v3 03/10] ARM: dts: aspeed: bletchley: update gpio-line-names"
In reply to: Potin Lai: "[PATCH v3 03/10] ARM: dts: aspeed: bletchley: update gpio-line-names"
Next in thread: Potin Lai: "[PATCH v3 06/10] ARM: dts: aspeed: bletchley: add interrupt support for sled io expander"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]