[PATCH 5.15 087/172] phy: xilinx: zynqmp: Fix bus width setting for SGMII

From: Greg Kroah-Hartman
Date: Mon Feb 14 2022 - 05:08:55 EST


From: Robert Hancock <robert.hancock@xxxxxxxxxx>

[ Upstream commit 37291f60d0822f191748c2a54ce63b0bc669020f ]

TX_PROT_BUS_WIDTH and RX_PROT_BUS_WIDTH are single registers with
separate bit fields for each lane. The code in xpsgtr_phy_init_sgmii was
not preserving the existing register value for other lanes, so enabling
the PHY in SGMII mode on one lane zeroed out the settings for all other
lanes, causing other PS-GTR peripherals such as USB3 to malfunction.

Use xpsgtr_clr_set to only manipulate the desired bits in the register.

Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver")
Signed-off-by: Robert Hancock <robert.hancock@xxxxxxxxxx>
Acked-by: Michal Simek <michal.simek@xxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220126001600.1592218-1-robert.hancock@xxxxxxxxxx
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/phy/xilinx/phy-zynqmp.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
index f478d8a17115b..9be9535ad7ab7 100644
--- a/drivers/phy/xilinx/phy-zynqmp.c
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -134,7 +134,8 @@
#define PROT_BUS_WIDTH_10 0x0
#define PROT_BUS_WIDTH_20 0x1
#define PROT_BUS_WIDTH_40 0x2
-#define PROT_BUS_WIDTH_SHIFT 2
+#define PROT_BUS_WIDTH_SHIFT(n) ((n) * 2)
+#define PROT_BUS_WIDTH_MASK(n) GENMASK((n) * 2 + 1, (n) * 2)

/* Number of GT lanes */
#define NUM_LANES 4
@@ -445,12 +446,12 @@ static void xpsgtr_phy_init_sata(struct xpsgtr_phy *gtr_phy)
static void xpsgtr_phy_init_sgmii(struct xpsgtr_phy *gtr_phy)
{
struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
+ u32 mask = PROT_BUS_WIDTH_MASK(gtr_phy->lane);
+ u32 val = PROT_BUS_WIDTH_10 << PROT_BUS_WIDTH_SHIFT(gtr_phy->lane);

/* Set SGMII protocol TX and RX bus width to 10 bits. */
- xpsgtr_write(gtr_dev, TX_PROT_BUS_WIDTH,
- PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
- xpsgtr_write(gtr_dev, RX_PROT_BUS_WIDTH,
- PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
+ xpsgtr_clr_set(gtr_dev, TX_PROT_BUS_WIDTH, mask, val);
+ xpsgtr_clr_set(gtr_dev, RX_PROT_BUS_WIDTH, mask, val);

xpsgtr_bypass_scrambler_8b10b(gtr_phy);
}
--
2.34.1