Re: [PATCH 3/3] power: supply: Add a driver for Injoinic power bank ICs

From: Sebastian Reichel
Date: Fri Feb 11 2022 - 16:22:30 EST


Hi,

On Sat, Jan 29, 2022 at 04:24:24PM -0600, Samuel Holland wrote:
> This driver supports several chip variants which all share the same I2C
> register interface. Since the chip will turn off and become inaccessible
> under conditions outside of software control (e.g. upon button press or
> input voltage removal), some special handling is needed to delay the
> initialization of the IC until it is accessible.
>
> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
> ---

Thanks, driver looks mostly good to me. Just two things:

> [...]
> +static const struct power_supply_desc ip5xxx_charger_desc = {
> + .name = "ip5xxx-charger",
> + .type = POWER_SUPPLY_TYPE_BATTERY,

POWER_SUPPLY_TYPE_BATTERY is the wrong type for a charger.
Considering the chips want 5V on the input side as far as
I could see, a sensible type is POWER_SUPPLY_TYPE_USB.

> + .properties = ip5xxx_charger_properties,
> + .num_properties = ARRAY_SIZE(ip5xxx_charger_properties),
> + .get_property = ip5xxx_charger_get_property,
> + .set_property = ip5xxx_charger_set_property,
> + .property_is_writeable = ip5xxx_charger_property_is_writeable,
> +};
> +
> +static const struct regmap_config ip5xxx_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = IP5XXX_BATOCV_DAT1,
> +};
> +
> +static int ip5xxx_power_probe(struct i2c_client *client)
> +{
> + struct power_supply_config psy_cfg = {};
> + struct device *dev = &client->dev;
> + struct power_supply *psy;
> + struct ip5xxx *ip5xxx;
> +
> + ip5xxx = devm_kzalloc(dev, sizeof(*ip5xxx), GFP_KERNEL);

if (!ip5xxx)
return -ENOMEM;

-- Sebastian

> + ip5xxx->regmap = devm_regmap_init_i2c(client, &ip5xxx_regmap_config);
> + if (IS_ERR(ip5xxx->regmap))
> + return PTR_ERR(ip5xxx->regmap);
> +
> + psy_cfg.of_node = dev->of_node;
> + psy_cfg.drv_data = ip5xxx;
> +
> + psy = devm_power_supply_register(dev, &ip5xxx_charger_desc, &psy_cfg);
> + if (IS_ERR(psy))
> + return PTR_ERR(psy);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id ip5xxx_power_of_match[] = {
> + { .compatible = "injoinic,ip5108" },
> + { .compatible = "injoinic,ip5109" },
> + { .compatible = "injoinic,ip5207" },
> + { .compatible = "injoinic,ip5209" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, ip5xxx_power_of_match);
> +
> +static struct i2c_driver ip5xxx_power_driver = {
> + .probe_new = ip5xxx_power_probe,
> + .driver = {
> + .name = "ip5xxx-power",
> + .of_match_table = ip5xxx_power_of_match,
> + }
> +};
> +module_i2c_driver(ip5xxx_power_driver);
> +
> +MODULE_AUTHOR("Samuel Holland <samuel@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Injoinic IP5xxx power bank IC driver");
> +MODULE_LICENSE("GPL");
> --
> 2.33.1
>

Attachment: signature.asc
Description: PGP signature