Re: [PATCH v2 2/5] ARM: dts: imx6dl-prtvt7: Add missing tvp5150 video decoder node

[Shawn Guo]

On Mon, Jan 31, 2022 at 11:28:38AM +0100, Oleksij Rempel wrote:
> From: Robin van der Gracht <robin@xxxxxxxxxxx>
> 
> Signed-off-by: Robin van der Gracht <robin@xxxxxxxxxxx>

Please write up some commit log.  Also your SoB is missing.

Shawn

> ---
>  arch/arm/boot/dts/imx6dl-prtvt7.dts | 42 +++++++++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
> index be7c4cb339e7..baaa6ffc4df9 100644
> --- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
> +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
> @@ -6,6 +6,7 @@
>  /dts-v1/;
>  #include "imx6dl.dtsi"
>  #include "imx6qdl-prti6q.dtsi"
> +#include <dt-bindings/display/sdtv-standards.h>
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/leds/common.h>
>  #include <dt-bindings/sound/fsl-imx-audmux.h>
> @@ -171,6 +172,18 @@ panel_in: endpoint {
>  		};
>  	};
>  
> +	connector {
> +		compatible = "composite-video-connector";
> +		label = "Composite0";
> +		sdtv-standards = <SDTV_STD_PAL_B>;
> +
> +		port {
> +			comp0_out: endpoint {
> +				remote-endpoint = <&tvp5150_comp0_in>;
> +			};
> +		};
> +	};
> +
>  	reg_bl_12v0: regulator-bl-12v0 {
>  		compatible = "regulator-fixed";
>  		pinctrl-names = "default";
> @@ -295,6 +308,31 @@ sgtl5000: audio-codec@a {
>  		VDDIO-supply = <&reg_3v3>;
>  		VDDD-supply = <&reg_1v8>;
>  	};
> +
> +	video@5c {
> +		compatible = "ti,tvp5150";
> +		reg = <0x5c>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port@0 {
> +			reg = <0>;
> +
> +			tvp5150_comp0_in: endpoint {
> +				remote-endpoint = <&comp0_out>;
> +			};
> +		};
> +
> +		/* Output port 2 is video output pad */
> +		port@2 {
> +			reg = <2>;
> +
> +			tvp5151_to_ipu1_csi0_mux: endpoint {
> +				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
> +			};
> +		};
> +	};
>  };
>  
>  &i2c3 {
> @@ -322,6 +360,10 @@ &ipu1_di0_disp0 {
>  	remote-endpoint = <&display_in>;
>  };
>  
> +&ipu1_csi0_mux_from_parallel_sensor {
> +	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
> +};
> +
>  &pwm1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_pwm1>;
> -- 
> 2.30.2
>