[PATCH 11/49] qed: replace bitmap_weight with bitmap_empty in qed_roce_stop()

[Yury Norov]

qed_roce_stop() calls bitmap_weight() to check if any bit of a given
bitmap is set. We can do it more efficiently with bitmap_empty() because
bitmap_empty() stops traversing the bitmap as soon as it finds first set
bit, while bitmap_weight() counts all bits unconditionally.

Signed-off-by: Yury Norov <yury.norov@xxxxxxxxx>
---
 drivers/net/ethernet/qlogic/qed/qed_roce.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c
index 071b4aeaddf2..134ecfca96a3 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_roce.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c
@@ -76,7 +76,7 @@ void qed_roce_stop(struct qed_hwfn *p_hwfn)
 	 * We delay for a short while if an async destroy QP is still expected.
 	 * Beyond the added delay we clear the bitmap anyway.
 	 */
-	while (bitmap_weight(rcid_map->bitmap, rcid_map->max_count)) {
+	while (!bitmap_empty(rcid_map->bitmap, rcid_map->max_count)) {
 		/* If the HW device is during recovery, all resources are
 		 * immediately reset without receiving a per-cid indication
 		 * from HW. In this case we don't expect the cid bitmap to be
-- 
2.32.0