Re: [PATCH] ARM: dts: qcom: pm8226: Add VADC node

[Rayyan Ansari]

On 2022-02-07 17:49, Rayyan Ansari wrote:
> Add a node for the voltage ADC (VADC) found in PM8226.
>
> Signed-off-by: Rayyan Ansari <rayyan@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/qcom-pm8226.dtsi | 33 ++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi
> b/arch/arm/boot/dts/qcom-pm8226.dtsi
> index b3d0f7b5874d..a651b4c941b8 100644
> --- a/arch/arm/boot/dts/qcom-pm8226.dtsi
> +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi
> @@ -40,6 +40,39 @@ smbb: charger@1000 {
>  			chg_otg: otg-vbus { };
>  		};
>
> +		pm8226_vadc: adc@3100 {
> +			compatible = "qcom,spmi-vadc";
> +			reg = <0x3100>;
> +			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			#io-channel-cells = <1>;
> +
> +			adc-chan@7 {
> +				reg = <VADC_VSYS>;
> +				qcom,pre-scaling = <1 3>;
> +				label = "vph_pwr";
> +			};
> +			adc-chan@8 {
> +				reg = <VADC_DIE_TEMP>;
> +				label = "die_temp";
> +			};
> +			adc-chan@9 {
> +				reg = <VADC_REF_625MV>;
> +				label = "ref_625mv";
> +			};
> +			adc-chan@a {
> +				reg = <VADC_REF_1250MV>;
> +				label = "ref_1250mv";
> +			};
> +			adc-chan@e {
> +				reg = <VADC_GND_REF>;
> +			};
> +			adc-chan@f {
> +				reg = <VADC_VDD_VADC>;
> +			};
> +		};
> +
>  		pm8226_mpps: mpps@a000 {
>  			compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp";
>  			reg = <0xa000>;

Ignore this patch, I forgot to include a header.