[PATCH v2 2/4] arm64: dts: qcom: sc7280: Add support for eDP panel on CRD

[Sankeerth Billakanti]

Enable the eDP display panel support without HPD on sc7280 platform.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@xxxxxxxxxxx>
---

Changes in v2:
  - sort node references alphabetically
  - improve readability
  - move the pwm pinctrl to pwm node
  - move the regulators to root
  - define backlight power
  - remove dummy regulator node
  - cleanup pinctrl definitions

 arch/arm64/boot/dts/qcom/sc7280-crd.dts | 122 ++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi    |   2 -
 2 files changed, 122 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
index e2efbdd..bff2707 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
@@ -21,6 +21,34 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	backlight_power: backlight-power {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight_power";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_power>;
+	};
+
+	edp_power: edp-power {
+		compatible = "regulator-fixed";
+		regulator-name = "edp_power";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_power>;
+	};
 };
 
 &apps_rsc {
@@ -76,6 +104,42 @@ ap_ts_pen_1v8: &i2c13 {
 	};
 };
 
+&edp_out {
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_edp {
+	status = "okay";
+
+	vdda-1p2-supply = <&vreg_l6b_1p2>;
+	vdda-0p9-supply = <&vreg_l10c_0p8>;
+};
+
+&mdss_edp_phy {
+	status = "okay";
+
+	vdda-1p2-supply = <&vreg_l6b_1p2>;
+	vdda-0p9-supply = <&vreg_l10c_0p8>;
+};
+
+&mdss_dp {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hot_plug_det>;
+	data-lanes = <0 1>;
+	vdda-1p2-supply = <&vreg_l6b_1p2>;
+	vdda-0p9-supply = <&vreg_l1b_0p8>;
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
 &nvme_3v3_regulator {
 	gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
 };
@@ -84,7 +148,65 @@ ap_ts_pen_1v8: &i2c13 {
 	pins = "gpio51";
 };
 
+&pm8350c_pwm {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_bl_pwm>;
+};
+
+&pm8350c_gpios {
+	edp_bl_power: edp-bl-power {
+		pins = "gpio7";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-disable;
+		output-low;
+	};
+
+	edp_bl_pwm: edp-bl-pwm {
+		pins = "gpio8";
+		function = "func1";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&soc {
+	edp_backlight: edp-backlight {
+		compatible = "pwm-backlight";
+
+		power-supply = <&backlight_power>;
+		pwms = <&pm8350c_pwm 3 65535>;
+	};
+
+	edp_panel: edp_panel {
+		compatible = "sharp,lq140m1jw46";
+
+		power-supply = <&edp_power>;
+		backlight = <&edp_backlight>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				edp_panel_in: endpoint {
+					remote-endpoint = <&edp_out>;
+				};
+			};
+		};
+	};
+};
+
 &tlmm {
+	edp_panel_power: edp-panel-power {
+		pins = "gpio80";
+		function = "gpio";
+		bias-pull-down;
+	};
+
 	tp_int_odl: tp-int-odl {
 		pins = "gpio7";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 3572399..f8fa716 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3012,8 +3012,6 @@
 
 			mdss_edp: edp@aea0000 {
 				compatible = "qcom,sc7280-edp";
-				pinctrl-names = "default";
-				pinctrl-0 = <&edp_hot_plug_det>;
 
 				reg = <0 0xaea0000 0 0x200>,
 				      <0 0xaea0200 0 0x200>,
-- 
2.7.4