Re: [PATCHv2] mmc: block: fix read single on recovery logic

From: Ulf Hansson
Date: Tue Feb 08 2022 - 10:13:27 EST


On Tue, 8 Feb 2022 at 07:37, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
>
> On 04/02/2022 17:11, Christian Löhle wrote:
> > On reads with MMC_READ_MULTIPLE_BLOCK that fail,
> > the recovery handler will use MMC_READ_SINGLE_BLOCK for
> > each of the blocks, up to MMC_READ_SINGLE_RETRIES times each.
> > The logic for this is fixed to never report unsuccessful reads
> > as success to the block layer.
> >
> > On command error with retries remaining, blk_update_request was
> > called with whatever value error was set last to.
> > In case it was last set to BLK_STS_OK (default), the read will be
> > reported as success, even though there was no data read from the device.
> > This could happen on a CRC mismatch for the response,
> > a card rejecting the command (e.g. again due to a CRC mismatch).
> > In case it was last set to BLK_STS_IOERR, the error is reported correctly,
> > but no retries will be attempted.
> >
> > Fixes: 81196976ed946c ("mmc: block: Add blk-mq support")
> > Cc: stable@xxxxxxxxxxxxxxx
> > Signed-off-by: Christian Loehle <cloehle@xxxxxxxxxxxxxx>
>
> Reviewed-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>

Applied for fixes, thanks to both of you!

Kind regards
Uffe


>
> > ---
> > v2:
> > - Do not allow data error retries
> > - Actually retry MMC_READ_SINGLE_RETRIES times instead of
> > MMC_READ_SINGLE_RETRIES-1
> >
> >
> > drivers/mmc/core/block.c | 28 ++++++++++++++--------------
> > 1 file changed, 14 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
> > index 4e61b28a002f..8d718aa56d33 100644
> > --- a/drivers/mmc/core/block.c
> > +++ b/drivers/mmc/core/block.c
> > @@ -1682,31 +1682,31 @@ static void mmc_blk_read_single(struct mmc_queue *mq, struct request *req)
> > struct mmc_card *card = mq->card;
> > struct mmc_host *host = card->host;
> > blk_status_t error = BLK_STS_OK;
> > - int retries = 0;
> >
> > do {
> > u32 status;
> > int err;
> > + int retries = 0;
> >
> > - mmc_blk_rw_rq_prep(mqrq, card, 1, mq);
> > + while (retries++ <= MMC_READ_SINGLE_RETRIES) {
> > + mmc_blk_rw_rq_prep(mqrq, card, 1, mq);
> >
> > - mmc_wait_for_req(host, mrq);
> > + mmc_wait_for_req(host, mrq);
> >
> > - err = mmc_send_status(card, &status);
> > - if (err)
> > - goto error_exit;
> > -
> > - if (!mmc_host_is_spi(host) &&
> > - !mmc_ready_for_data(status)) {
> > - err = mmc_blk_fix_state(card, req);
> > + err = mmc_send_status(card, &status);
> > if (err)
> > goto error_exit;
> > - }
> >
> > - if (mrq->cmd->error && retries++ < MMC_READ_SINGLE_RETRIES)
> > - continue;
> > + if (!mmc_host_is_spi(host) &&
> > + !mmc_ready_for_data(status)) {
> > + err = mmc_blk_fix_state(card, req);
> > + if (err)
> > + goto error_exit;
> > + }
> >
> > - retries = 0;
> > + if (!mrq->cmd->error)
> > + break;
> > + }
> >
> > if (mrq->cmd->error ||
> > mrq->data->error ||
> >
>