Re: [PATCH] ARM: dts: at91: sama7g5: Add crypto nodes

[Tudor.Ambarus]

On 2/4/22 15:37, Tudor Ambarus wrote:
> Describe and enable the AES, SHA and TDES crypto IPs.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/sama7g5.dtsi | 35 ++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
> index 7972cb8c2562..1f2731a64139 100644
> --- a/arch/arm/boot/dts/sama7g5.dtsi
> +++ b/arch/arm/boot/dts/sama7g5.dtsi
> @@ -393,6 +393,29 @@ pit64b1: timer@e1804000 {
>  			clock-names = "pclk", "gclk";
>  		};
>  
> +		aes: aes@e1810000 {
> +			compatible = "atmel,at91sam9g46-aes";
> +			reg = <0xe1810000 0x100>;
> +			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> +			dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
> +			       <&dma0 AT91_XDMAC_DT_PERID(2)>;
> +			dma-names = "tx", "rx";
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
> +			clock-names = "aes_clk";
> +			status = "okay";
> +		};
> +
> +		sha: sha@e1814000 {
> +			compatible = "atmel,at91sam9g46-sha";
> +			reg = <0xe1814000 0x100>;
> +			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +			dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
> +			dma-names = "tx";
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
> +			clock-names = "sha_clk";
> +			status = "okay";
> +		};
> +
>  		flx0: flexcom@e1818000 {
>  			compatible = "atmel,sama5d2-flexcom";
>  			reg = <0xe1818000 0x200>;
> @@ -475,6 +498,18 @@ trng: rng@e2010000 {
>  			status = "disabled";
>  		};
>  
> +		tdes@e2014000 {
tdes: tdes@e2014000 

I should have added a label here. Nicolas, maybe you can add it when applying,
if everything else looks ok to you.


> +			compatible = "atmel,at91sam9g46-tdes";
> +			reg = <0xe2014000 0x100>;
> +			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> +			dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
> +			       <&dma0 AT91_XDMAC_DT_PERID(53)>;
> +			dma-names = "tx", "rx";
> +			clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
> +			clock-names = "tdes_clk";
> +			status = "okay";
> +		};
> +
>  		flx4: flexcom@e2018000 {
>  			compatible = "atmel,sama5d2-flexcom";
>  			reg = <0xe2018000 0x200>;