[PATCH v2 08/15] coresight: Make ETM4x TRCSTALLCTLR register accesses consistent with sysreg.h

From: James Clark
Date: Thu Feb 03 2022 - 07:06:43 EST


This is a no-op change for style and consistency and has no effect on the
binary produced by gcc-11.

Signed-off-by: James Clark <james.clark@xxxxxxx>
---
drivers/hwtracing/coresight/coresight-etm4x-sysfs.c | 12 ++++++------
drivers/hwtracing/coresight/coresight-etm4x.h | 4 ++++
2 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
index cfa6f72a1e39..d808eeae8b07 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
@@ -397,22 +397,22 @@ static ssize_t mode_store(struct device *dev,

/* bit[8], Instruction stall bit */
if ((config->mode & ETM_MODE_ISTALL_EN) && (drvdata->stallctl == true))
- config->stall_ctrl |= BIT(8);
+ config->stall_ctrl |= TRCSTALLCTLR_ISTALL;
else
- config->stall_ctrl &= ~BIT(8);
+ config->stall_ctrl &= ~TRCSTALLCTLR_ISTALL;

/* bit[10], Prioritize instruction trace bit */
if (config->mode & ETM_MODE_INSTPRIO)
- config->stall_ctrl |= BIT(10);
+ config->stall_ctrl |= TRCSTALLCTLR_INSTPRIORITY;
else
- config->stall_ctrl &= ~BIT(10);
+ config->stall_ctrl &= ~TRCSTALLCTLR_INSTPRIORITY;

/* bit[13], Trace overflow prevention bit */
if ((config->mode & ETM_MODE_NOOVERFLOW) &&
(drvdata->nooverflow == true))
- config->stall_ctrl |= BIT(13);
+ config->stall_ctrl |= TRCSTALLCTLR_NOOVERFLOW;
else
- config->stall_ctrl &= ~BIT(13);
+ config->stall_ctrl &= ~TRCSTALLCTLR_NOOVERFLOW;

/* bit[9] Start/stop logic control bit */
if (config->mode & ETM_MODE_VIEWINST_STARTSTOP)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
index eb72b81bbf85..e37393934e0d 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.h
+++ b/drivers/hwtracing/coresight/coresight-etm4x.h
@@ -220,6 +220,10 @@
#define TRCEVENTCTL1R_ATB BIT(11)
#define TRCEVENTCTL1R_LPOVERRIDE BIT(12)

+#define TRCSTALLCTLR_ISTALL BIT(8)
+#define TRCSTALLCTLR_INSTPRIORITY BIT(10)
+#define TRCSTALLCTLR_NOOVERFLOW BIT(13)
+
/*
* System instructions to access ETM registers.
* See ETMv4.4 spec ARM IHI0064F section 4.3.6 System instructions
--
2.28.0