Re: [PATCH v12 2/9] drm/ingenic: Add support for JZ4780 and HDMI output
From: Paul Cercueil
Date: Wed Feb 02 2022 - 07:06:28 EST
Hi Nikolaus,
Le mer., févr. 2 2022 at 12:56:35 +0100, H. Nikolaus Schaller
<hns@xxxxxxxxxxxxx> a écrit :
Hi Paul,
thanks for the reviews. Looks as if we are close to making a goal.
Am 02.02.2022 um 11:23 schrieb Paul Cercueil <paul@xxxxxxxxxxxxxxx>:
Hi Nikolaus,
Le lun., janv. 31 2022 at 13:26:48 +0100, H. Nikolaus Schaller
<hns@xxxxxxxxxxxxx> a écrit :
From: Paul Boddie <paul@xxxxxxxxxxxxx>
Add support for the LCD controller present on JZ4780 SoCs.
This SoC uses 8-byte descriptors which extend the current
4-byte descriptors used for other Ingenic SoCs.
Tested on MIPS Creator CI20 board.
Signed-off-by: Paul Boddie <paul@xxxxxxxxxxxxx>
Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 61
++++++++++++++++++++++-
drivers/gpu/drm/ingenic/ingenic-drm.h | 38 ++++++++++++++
2 files changed, 98 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index 9c60fc4605e4b..ccdb9eedd9247 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -6,6 +6,7 @@
#include "ingenic-drm.h"
+#include <linux/bitfield.h>
#include <linux/component.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
@@ -49,6 +50,11 @@ struct ingenic_dma_hwdesc {
u32 addr;
u32 id;
u32 cmd;
+ /* extended hw descriptor for jz4780 */
+ u32 offsize;
+ u32 pagewidth;
+ u32 cpos;
+ u32 dessize;
} __aligned(16);
struct ingenic_dma_hwdescs {
@@ -59,7 +65,9 @@ struct ingenic_dma_hwdescs {
struct jz_soc_info {
bool needs_dev_clk;
bool has_osd;
+ bool has_alpha;
bool map_noncoherent;
+ bool use_extended_hwdesc;
unsigned int max_width, max_height;
const u32 *formats_f0, *formats_f1;
unsigned int num_formats_f0, num_formats_f1;
@@ -446,6 +454,9 @@ static int
ingenic_drm_plane_atomic_check(struct drm_plane *plane,
if (!crtc)
return 0;
+ if (plane == &priv->f0)
+ return -EINVAL;
This will break JZ4725B -> JZ4770 SoCs, the f0 plane is perfectly
usable there.
Hm. I think it was your request/proposal to add this [1]?
Because otherwise with your current patchset the f0 plane does not work
*on JZ4780*. It does work on older SoCs.
What I have forgotten is why the f0 plane should not be usable for
jz4780.
We return an error here to prevent userspace from using the f0 plane
until it's effectively working on the JZ4780.
Cheers,
-Paul
BR and thanks,
Nikolaus
[1] end of
https://patchwork.kernel.org/project/dri-devel/patch/2c7d0aa7d3ef480ebb996d37c27cbaa6f722728b.1633436959.git.hns@xxxxxxxxxxxxx/#24578683
Cheers,
-Paul
+
crtc_state = drm_atomic_get_existing_crtc_state(state,
crtc);
if (WARN_ON(!crtc_state))
@@ -662,6 +673,33 @@ static void
ingenic_drm_plane_atomic_update(struct drm_plane *plane,
hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
hwdesc->next = dma_hwdesc_addr(priv, next_id);
+ if (priv->soc_info->use_extended_hwdesc) {
+ hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
+
+ /* Extended 8-byte descriptor */
+ hwdesc->cpos = 0;
+ hwdesc->offsize = 0;
+ hwdesc->pagewidth = 0;
+
+ switch (newstate->fb->format->format) {
+ case DRM_FORMAT_XRGB1555:
+ hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
+ fallthrough;
+ case DRM_FORMAT_RGB565:
+ hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
+ break;
+ case DRM_FORMAT_XRGB8888:
+ hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
+ break;
+ }
+ hwdesc->cpos |= (JZ_LCD_CPOS_COEFFICIENT_1 <<
+ JZ_LCD_CPOS_COEFFICIENT_OFFSET);
+ hwdesc->dessize =
+ (0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |
+ FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK, height - 1) |
+ FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK, width - 1);
+ }
+
if (drm_atomic_crtc_needs_modeset(crtc_state)) {
fourcc = newstate->fb->format->format;
@@ -693,6 +731,9 @@ static void
ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
| JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
}
+ if (priv->soc_info->use_extended_hwdesc)
+ cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
+
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
@@ -1015,6 +1056,7 @@ static int ingenic_drm_bind(struct device
*dev, bool has_components)
long parent_rate;
unsigned int i, clone_mask = 0;
int ret, irq;
+ u32 osdc = 0;
soc_info = of_device_get_match_data(dev);
if (!soc_info) {
@@ -1272,7 +1314,10 @@ static int ingenic_drm_bind(struct device
*dev, bool has_components)
/* Enable OSD if available */
if (soc_info->has_osd)
- regmap_write(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);
+ osdc |= JZ_LCD_OSDC_OSDEN;
+ if (soc_info->has_alpha)
+ osdc |= JZ_LCD_OSDC_ALPHAEN;
+ regmap_write(priv->map, JZ_REG_LCD_OSDC, osdc);
mutex_init(&priv->clk_mutex);
priv->clock_nb.notifier_call = ingenic_drm_update_pixclk;
@@ -1468,10 +1513,24 @@ static const struct jz_soc_info
jz4770_soc_info = {
.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
};
+static const struct jz_soc_info jz4780_soc_info = {
+ .needs_dev_clk = true,
+ .has_osd = true,
+ .has_alpha = true,
+ .use_extended_hwdesc = true,
+ .max_width = 4096,
+ .max_height = 2048,
+ .formats_f1 = jz4770_formats_f1,
+ .num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
+ .formats_f0 = jz4770_formats_f0,
+ .num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
+};
+
static const struct of_device_id ingenic_drm_of_match[] = {
{ .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
{ .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info
},
{ .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
+ { .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h
b/drivers/gpu/drm/ingenic/ingenic-drm.h
index 22654ac1dde1c..cb1d09b625881 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm.h
+++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
@@ -44,8 +44,11 @@
#define JZ_REG_LCD_XYP1 0x124
#define JZ_REG_LCD_SIZE0 0x128
#define JZ_REG_LCD_SIZE1 0x12c
+#define JZ_REG_LCD_PCFG 0x2c0
#define JZ_LCD_CFG_SLCD BIT(31)
+#define JZ_LCD_CFG_DESCRIPTOR_8 BIT(28)
+#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN BIT(25)
#define JZ_LCD_CFG_PS_DISABLE BIT(23)
#define JZ_LCD_CFG_CLS_DISABLE BIT(22)
#define JZ_LCD_CFG_SPL_DISABLE BIT(21)
@@ -63,6 +66,7 @@
#define JZ_LCD_CFG_DE_ACTIVE_LOW BIT(9)
#define JZ_LCD_CFG_VSYNC_ACTIVE_LOW BIT(8)
#define JZ_LCD_CFG_18_BIT BIT(7)
+#define JZ_LCD_CFG_24_BIT BIT(6)
#define JZ_LCD_CFG_PDW (BIT(5) | BIT(4))
#define JZ_LCD_CFG_MODE_GENERIC_16BIT 0
@@ -132,6 +136,7 @@
#define JZ_LCD_CMD_SOF_IRQ BIT(31)
#define JZ_LCD_CMD_EOF_IRQ BIT(30)
#define JZ_LCD_CMD_ENABLE_PAL BIT(28)
+#define JZ_LCD_CMD_FRM_ENABLE BIT(26)
#define JZ_LCD_SYNC_MASK 0x3ff
@@ -153,6 +158,7 @@
#define JZ_LCD_RGBC_EVEN_BGR (0x5 << 0)
#define JZ_LCD_OSDC_OSDEN BIT(0)
+#define JZ_LCD_OSDC_ALPHAEN BIT(2)
#define JZ_LCD_OSDC_F0EN BIT(3)
#define JZ_LCD_OSDC_F1EN BIT(4)
@@ -176,6 +182,38 @@
#define JZ_LCD_SIZE01_WIDTH_LSB 0
#define JZ_LCD_SIZE01_HEIGHT_LSB 16
+#define JZ_LCD_DESSIZE_ALPHA_OFFSET 24
+#define JZ_LCD_DESSIZE_HEIGHT_MASK GENMASK(23, 12)
+#define JZ_LCD_DESSIZE_WIDTH_MASK GENMASK(11, 0)
+
+#define JZ_LCD_CPOS_BPP_15_16 (4 << 27)
+#define JZ_LCD_CPOS_BPP_18_24 (5 << 27)
+#define JZ_LCD_CPOS_BPP_30 (7 << 27)
+#define JZ_LCD_CPOS_RGB555 BIT(30)
+#define JZ_LCD_CPOS_PREMULTIPLY_LCD BIT(26)
+#define JZ_LCD_CPOS_COEFFICIENT_OFFSET 24
+#define JZ_LCD_CPOS_COEFFICIENT_0 0
+#define JZ_LCD_CPOS_COEFFICIENT_1 1
+#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1 2
+#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1 3
+
+#define JZ_LCD_RGBC_RGB_PADDING BIT(15)
+#define JZ_LCD_RGBC_RGB_PADDING_FIRST BIT(14)
+#define JZ_LCD_RGBC_422 BIT(8)
+#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE BIT(7)
+
+#define JZ_LCD_PCFG_PRI_MODE BIT(31)
+#define JZ_LCD_PCFG_HP_BST_4 (0 << 28)
+#define JZ_LCD_PCFG_HP_BST_8 (1 << 28)
+#define JZ_LCD_PCFG_HP_BST_16 (2 << 28)
+#define JZ_LCD_PCFG_HP_BST_32 (3 << 28)
+#define JZ_LCD_PCFG_HP_BST_64 (4 << 28)
+#define JZ_LCD_PCFG_HP_BST_16_CONT (5 << 28)
+#define JZ_LCD_PCFG_HP_BST_DISABLE (7 << 28)
+#define JZ_LCD_PCFG_THRESHOLD2_OFFSET 18
+#define JZ_LCD_PCFG_THRESHOLD1_OFFSET 9
+#define JZ_LCD_PCFG_THRESHOLD0_OFFSET 0
+
struct device;
struct drm_plane;
struct drm_plane_state;
--
2.33.0