Re: [PATCH v2 4/5] ARM: dts: imx6dl: plym2m, prtvt7, victgo: make use of new resistive-adc-touch driver

[Oleksij Rempel]

Hi Sam,

On Mon, Jan 31, 2022 at 04:42:06PM +0100, Sam Ravnborg wrote:
> On Mon, Jan 31, 2022 at 11:28:40AM +0100, Oleksij Rempel wrote:
> > The tsc2046 is an ADC used as touchscreen controller. To share as mach
>                                                                     much
> > code as possible, we should use it as actual ADC + virtual touchscreen
> > controller.
> > With this patch we make use of the new kernel IIO and HID infrastructure.
> > 
> > Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/imx6dl-plym2m.dts | 59 +++++++++++++++++++++--------
> >  arch/arm/boot/dts/imx6dl-prtvt7.dts | 57 +++++++++++++++++++++-------
> >  arch/arm/boot/dts/imx6dl-victgo.dts | 59 ++++++++++++++++++++++-------
> >  3 files changed, 132 insertions(+), 43 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
> > index 60fe5f14666e..73c7622bfe0f 100644
> > --- a/arch/arm/boot/dts/imx6dl-plym2m.dts
> > +++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
> > @@ -101,6 +101,18 @@ reg_12v0: regulator-12v0 {
> >  		regulator-min-microvolt = <12000000>;
> >  		regulator-max-microvolt = <12000000>;
> >  	};
> > +
> > +	touchscreen {
> > +		compatible = "resistive-adc-touch";
> > +		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
> > +                              <&adc_ts 5>;
> > +		io-channel-names = "y", "z1", "z2", "x";
> > +		touchscreen-min-pressure = <64687>;
> > +		touchscreen-inverted-x;
> > +		touchscreen-inverted-y;
> > +		touchscreen-x-plate-ohms = <300>;
> > +		touchscreen-y-plate-ohms = <800>;
> > +	};
> >  };
> >  
> >  &can1 {
> > @@ -129,26 +141,41 @@ &ecspi2 {
> >  	pinctrl-0 = <&pinctrl_ecspi2>;
> >  	status = "okay";
> >  
> > -	touchscreen@0 {
> > -		compatible = "ti,tsc2046";
> > +	adc_ts: adc@0 {
> > +		compatible = "ti,tsc2046e-adc";
> >  		reg = <0>;
> >  		pinctrl-0 = <&pinctrl_tsc2046>;
> >  		pinctrl-names ="default";
> > -		spi-max-frequency = <100000>;
> > -		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
> > -		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
> > +		spi-max-frequency = <1000000>;
> > +		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
> > +		#io-channel-cells = <1>;
> 
> I quickly skimmed the patch - we seem to loose the pendown-gpio in most
> of the patches - I do not see it replaced.

pendown-gpio is not used by the new driver. It is replace by the IIO
trigger. Please see this comment:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git/tree/drivers/iio/adc/ti-tsc2046.c?h=testing#n521

Regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |