Re: [PATCH 04/15] PCI: mvebu: Handle invalid size of read config request

[Bjorn Helgaas]

On Thu, Nov 25, 2021 at 01:45:54PM +0100, Pali Rohár wrote:
> Function mvebu_pcie_hw_rd_conf() does not handle invalid size. So correctly
> set read value to all-ones and return appropriate error return value
> PCIBIOS_BAD_REGISTER_NUMBER like in mvebu_pcie_hw_wr_conf() function.
> 
> Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx

Is there a bug that this fixes?  If not, I would drop the stable tag
(as I see Lorenzo already did, thanks!).

> ---
>  drivers/pci/controller/pci-mvebu.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
> index 08274132cdfb..19c6ee298442 100644
> --- a/drivers/pci/controller/pci-mvebu.c
> +++ b/drivers/pci/controller/pci-mvebu.c
> @@ -261,6 +261,9 @@ static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
>  	case 4:
>  		*val = readl_relaxed(conf_data);
>  		break;
> +	default:
> +		*val = 0xffffffff;
> +		return PCIBIOS_BAD_REGISTER_NUMBER;

Might be the right thing to do, but there are many config accessors
that do not set *val to ~0 before returning
PCIBIOS_BAD_REGISTER_NUMBER:

  pci_bus_read_config_byte (and word, dword)  # PCI_OP_READ(), *val unchanged
  pci_generic_config_read                     # *val = 32-bit value
  pci_user_read_config_byte (...)             # PCI_USER_READ_CONFIG(), *val unchanged
  sh7786_pcie_read                            # *val unchanged
  dw_pcie_read                                # *val = 0
  mobiveil_pcie_read                          # *val = 0
  faraday_raw_pci_read_config                 # *val = 32-bit value
  ixp4xx_pci_read_config                      # *val unchanged
  orion5x_pci_hw_rd_conf                      # *val = 32-bit value
  orion_pcie_rd_conf                          # *val = 32-bit value
  bonito64_pcibios_read                       # *val = 32-bit value
  loongson_pcibios_read                       # *val = 32-bit value
  msc_pcibios_read                            # *val = 32-bit value
  ar724x_pci_read                             # *val unchanged
  bcm1480_pcibios_read                        # *val = 32-bit value
  _altera_pcie_cfg_read                       # *val = 32-bit value
  rockchip_pcie_rd_own_conf                   # *val = 0
  rockchip_pcie_rd_other_conf                 # *val = 0
  pci_bridge_emul_conf_read                   # may depend on op?

There are more, but I got tired of looking.  I actually didn't see any
that set *val to ~0.

I think the check in PCI_OP_READ() means that most accessors will
never see an invalid "size".

>  	}
>  
>  	return PCIBIOS_SUCCESSFUL;
> -- 
> 2.20.1
>