Re: [PATCH v21 7/8] arm64: dts: mt8192: add svs device information

[AngeloGioacchino Del Regno]

Il 07/01/22 10:51, Roger Lu ha scritto:
> Add compitable/reg/irq/clock/efuse/reset setting in svs node.

Typo: compitable => compatible
.. also, you're not only adding the svs node, but also efuse: please add that
information in the commit description.

> Signed-off-by: Roger Lu <roger.lu@xxxxxxxxxxxx>

This patch seems to not apply on top of the current linux-next, can you please
rebase it? That would resolve issues with this series and would be picked sooner.

Apart from that...

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>

> ---
>   arch/arm64/boot/dts/mediatek/mt8192.dtsi | 39 ++++++++++++++++++++++++
>   1 file changed, 39 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> index c7c7d4e017ae..c111e26489dd 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> @@ -9,6 +9,8 @@
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>   #include <dt-bindings/interrupt-controller/irq.h>
>   #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
> +#include <dt-bindings/reset/ti-syscon.h>
> +
>   
>   / {
>   	compatible = "mediatek,mt8192";
> @@ -268,6 +270,14 @@
>   			compatible = "mediatek,mt8192-infracfg", "syscon";
>   			reg = <0 0x10001000 0 0x1000>;
>   			#clock-cells = <1>;
> +
> +			infracfg_rst: reset-controller {
> +				compatible = "mediatek,infra-reset", "ti,syscon-reset";
> +				#reset-cells = <1>;
> +				ti,reset-bits = <
> +					0x150 5 0x154 5 0 0     (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* 0: svs */
> +				>;
> +			};
>   		};
>   
>   		pericfg: syscon@10003000 {
> @@ -362,6 +372,20 @@
>   			status = "disabled";
>   		};
>   
> +		svs: svs@1100b000 {
> +			compatible = "mediatek,mt8192-svs";
> +			reg = <0 0x1100b000 0 0x1000>;
> +			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&infracfg CLK_INFRA_THERM>;
> +			clock-names = "main";
> +			nvmem-cells = <&svs_calibration>,
> +				      <&lvts_e_data1>;
> +			nvmem-cell-names = "svs-calibration-data",
> +					   "t-calibration-data";
> +			resets = <&infracfg_rst 0>;
> +			reset-names = "svs_rst";
> +		};
> +
>   		spi1: spi@11010000 {
>   			compatible = "mediatek,mt8192-spi",
>   				     "mediatek,mt6765-spi";
> @@ -479,6 +503,21 @@
>   			#clock-cells = <1>;
>   		};
>   
> +		efuse: efuse@11c10000 {
> +			compatible = "mediatek,efuse";
> +			reg = <0 0x11c10000 0 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			lvts_e_data1: data1@1c0 {
> +				reg = <0x1c0 0x58>;
> +			};
> +
> +			svs_calibration: calib@580 {
> +				reg = <0x580 0x68>;
> +			};
> +		};
> +
>   		i2c3: i2c3@11cb0000 {
>   			compatible = "mediatek,mt8192-i2c";
>   			reg = <0 0x11cb0000 0 0x1000>,


--
AngeloGioacchino Del Regno
Software Engineer

Collabora Ltd.
Platinum Building, St John's Innovation Park, Cambridge CB4 0DS, UK
Registered in England & Wales, no. 5513718