RE: [PATCH RFT] scsi: pm8001: Fix FW crash for maxcpus=1

[Ajish.Koshy]

Hi John,

> On 06/01/2022 13:03, Ajish.Koshy@xxxxxxxxxxxxx wrote:
> >>   only a specific vector and, also, why we check at all in an
> >> interrupt handler.
> > Here is my initial understanding so far based on the code and data
> > sheet
> >
> > 1. Controller has the capability to communicate to the host about
> > fatal error condition via configured interrupt vector MSI/MSI-X.
> > 2. This capability is achieved by setting two fields
> >   a. Enable Controller Fatal error notification
> >      Dowrd 0x1C, Bit[0].
> >      1 - Enable; 0 - Disable
> >      Code: pm8001_ha->main_cfg_tbl.pm80xx_tbl.
> >      fatal_err_interrupt = 0x01;
> >   b. Fatal Error Interrupt Vector Dword 0x1C, bit[15:8]
> >      This parameter configures which interrupt vector
> >      is used to notify the host of the fatal error.
> >      Code: /* Update Fatal error interrupt vector */
> >      pm8001_ha->main_cfg_tbl.pm80xx_tbl.
> >      fatal_err_interrupt |=
> >      ((pm8001_ha->max_q_num - 1) << 8);
> >
> > Probably this will be the reason why we check the vector in
> > process_oq() for processing controller fatal error
> >
> > if (vec == (pm8001_ha->max_q_num - 1)) {
> >
> > Please do let me know if it helped in clarification.
> >
> 
> Sounds reasonable. And we only discover the issue for 8008/8009 now as we
> have that (pm8001_ha->max_q_num - 1) vector being used for standard IO.
> 
> So let me know of any other issue, otherwise I'll send a v2 with the coding
> style fixup.

After going through check_fw_ready(), the change here looks fine.

> 
> Thanks,
> John