Re: [PATCH 10/11] PCI: mvebu: Implement support for legacy INTx interrupts

From: Marc Zyngier
Date: Thu Jan 06 2022 - 10:28:29 EST

Next message: Niklas Söderlund: "Re: [PATCH v3] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt"
Previous message: Lad, Prabhakar: "Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt"
In reply to: Pali Rohár: "[PATCH 10/11] PCI: mvebu: Implement support for legacy INTx interrupts"
Next in thread: Pali Rohár: "Re: [PATCH 10/11] PCI: mvebu: Implement support for legacy INTx interrupts"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, 05 Jan 2022 15:02:38 +0000,
Pali Rohár <pali@xxxxxxxxxx> wrote:
>
> This adds support for legacy INTx interrupts received from other PCIe
> devices and which are reported by a new INTx irq chip.
>
> With this change, kernel can distinguish between INTA, INTB, INTC and INTD
> interrupts.
>
> Note that for this support, device tree files has to be properly adjusted
> to provide "interrupts" or "interrupts-extended" property with intx
> interrupt source, "interrupt-names" property with "intx" string and also
> 'interrupt-controller' subnode must be defined.
>
> If device tree files do not provide these nodes then driver would work as
> before.
>
> Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
> ---
> drivers/pci/controller/pci-mvebu.c | 182 +++++++++++++++++++++++++++--
> 1 file changed, 174 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
> index 1e90ab888075..04bcdd7b7a6d 100644
> --- a/drivers/pci/controller/pci-mvebu.c
> +++ b/drivers/pci/controller/pci-mvebu.c
> @@ -54,9 +54,10 @@
> PCIE_CONF_ADDR_EN)
> #define PCIE_CONF_DATA_OFF 0x18fc
> #define PCIE_INT_CAUSE_OFF 0x1900
> +#define PCIE_INT_UNMASK_OFF 0x1910
> +#define PCIE_INT_INTX(i) BIT(24+i)
> #define PCIE_INT_PM_PME BIT(28)
> -#define PCIE_MASK_OFF 0x1910
> -#define PCIE_MASK_ENABLE_INTS 0x0f000000
> +#define PCIE_INT_ALL_MASK GENMASK(31, 0)
> #define PCIE_CTRL_OFF 0x1a00
> #define PCIE_CTRL_X1_MODE 0x0001
> #define PCIE_CTRL_RC_MODE BIT(1)
> @@ -110,6 +111,10 @@ struct mvebu_pcie_port {
> struct mvebu_pcie_window iowin;
> u32 saved_pcie_stat;
> struct resource regs;
> + struct irq_domain *intx_irq_domain;
> + struct irq_chip intx_irq_chip;

Why is this structure per port? It really should be global. Printing
the port number in the name isn't enough of a reason.

> + raw_spinlock_t irq_lock;
> + int intx_irq;
> };
>
> static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
> @@ -235,7 +240,7 @@ static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
>
> static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
> {
> - u32 ctrl, lnkcap, cmd, dev_rev, mask;
> + u32 ctrl, lnkcap, cmd, dev_rev, unmask;
>
> /* Setup PCIe controller to Root Complex mode. */
> ctrl = mvebu_readl(port, PCIE_CTRL_OFF);
> @@ -288,10 +293,30 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
> /* Point PCIe unit MBUS decode windows to DRAM space. */
> mvebu_pcie_setup_wins(port);
>
> - /* Enable interrupt lines A-D. */
> - mask = mvebu_readl(port, PCIE_MASK_OFF);
> - mask |= PCIE_MASK_ENABLE_INTS;
> - mvebu_writel(port, mask, PCIE_MASK_OFF);
> + /* Mask all interrupt sources. */
> + mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_UNMASK_OFF);
> +
> + /* Clear all interrupt causes. */
> + mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_CAUSE_OFF);
> +
> + if (port->intx_irq <= 0) {
> + /*
> + * When neither "summary" interrupt, nor "intx" interrupt was
> + * specified in DT then unmask all legacy INTx interrupts as in
> + * this case driver does not provide a way for masking and
> + * unmasking of individual legacy INTx interrupts. In this case
> + * all interrupts, including legacy INTx are reported via one
> + * shared GIC source and therefore kernel cannot distinguish
> + * which individual legacy INTx was triggered. These interrupts
> + * are shared, so it should not cause any issue. Just
> + * performance penalty as every PCIe interrupt handler needs to
> + * be called when some interrupt is triggered.
> + */
> + unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
> + unmask |= PCIE_INT_INTX(0) | PCIE_INT_INTX(1) |
> + PCIE_INT_INTX(2) | PCIE_INT_INTX(3);
> + mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);

Maybe worth printing a warning here, so that the user knows they are
on thin ice.

> + }
> }
>
> static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
> @@ -924,6 +949,109 @@ static struct pci_ops mvebu_pcie_ops = {
> .write = mvebu_pcie_wr_conf,
> };
>
> +static void mvebu_pcie_intx_irq_mask(struct irq_data *d)
> +{
> + struct mvebu_pcie_port *port = d->domain->host_data;
> + irq_hw_number_t hwirq = irqd_to_hwirq(d);
> + unsigned long flags;
> + u32 unmask;
> +
> + raw_spin_lock_irqsave(&port->irq_lock, flags);
> + unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
> + unmask &= ~PCIE_INT_INTX(hwirq);
> + mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
> + raw_spin_unlock_irqrestore(&port->irq_lock, flags);
> +}
> +
> +static void mvebu_pcie_intx_irq_unmask(struct irq_data *d)
> +{
> + struct mvebu_pcie_port *port = d->domain->host_data;
> + irq_hw_number_t hwirq = irqd_to_hwirq(d);
> + unsigned long flags;
> + u32 unmask;
> +
> + raw_spin_lock_irqsave(&port->irq_lock, flags);
> + unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);
> + unmask |= PCIE_INT_INTX(hwirq);
> + mvebu_writel(port, unmask, PCIE_INT_UNMASK_OFF);
> + raw_spin_unlock_irqrestore(&port->irq_lock, flags);
> +}
> +
> +static int mvebu_pcie_intx_irq_map(struct irq_domain *h,
> + unsigned int virq, irq_hw_number_t hwirq)
> +{
> + struct mvebu_pcie_port *port = h->host_data;
> +
> + irq_set_status_flags(virq, IRQ_LEVEL);
> + irq_set_chip_and_handler(virq, &port->intx_irq_chip, handle_level_irq);
> + irq_set_chip_data(virq, port);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops mvebu_pcie_intx_irq_domain_ops = {
> + .map = mvebu_pcie_intx_irq_map,
> + .xlate = irq_domain_xlate_onecell,
> +};
> +
> +static int mvebu_pcie_init_irq_domain(struct mvebu_pcie_port *port)
> +{
> + struct device *dev = &port->pcie->pdev->dev;
> + struct device_node *pcie_intc_node;
> +
> + raw_spin_lock_init(&port->irq_lock);
> +
> + port->intx_irq_chip.name = devm_kasprintf(dev, GFP_KERNEL,
> + "mvebu-%s-INTx",
> + port->name);

That's exactly what I really don't want to see. It prevents sharing of
the irq_chip structure, and gets in the way of making it const in the
future. Yes, I know that some drivers do that. I can't fix those,
because /proc/interrupts is ABI. But I really don't want to see more
of these.

/sys/kernel/debug/irqs already has all the information you need, as it
will happily give you the domain name and the interrupt topology.

> + port->intx_irq_chip.irq_mask = mvebu_pcie_intx_irq_mask;
> + port->intx_irq_chip.irq_unmask = mvebu_pcie_intx_irq_unmask;
> +
> + pcie_intc_node = of_get_next_child(port->dn, NULL);
> + if (!pcie_intc_node) {
> + dev_err(dev, "No PCIe Intc node found for %s\n", port->name);
> + return -ENODEV;
> + }
> +
> + port->intx_irq_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
> + &mvebu_pcie_intx_irq_domain_ops,
> + port);
> + of_node_put(pcie_intc_node);
> + if (!port->intx_irq_domain) {
> + devm_kfree(dev, port->intx_irq_chip.name);
> + dev_err(dev, "Failed to get INTx IRQ domain for %s\n", port->name);
> + return -ENOMEM;
> + }
> +
> + return 0;
> +}
> +
> +static void mvebu_pcie_irq_handler(struct irq_desc *desc)
> +{
> + struct mvebu_pcie_port *port = irq_desc_get_handler_data(desc);
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + struct device *dev = &port->pcie->pdev->dev;
> + u32 cause, unmask, status;
> + int i;
> +
> + chained_irq_enter(chip, desc);
> +
> + cause = mvebu_readl(port, PCIE_INT_CAUSE_OFF);
> + unmask = mvebu_readl(port, PCIE_INT_UNMASK_OFF);

Why do you need to read this? If the CAUSE register also returns the
masked interrupts that are pending, it may be worth keeping a shadow
copy of the this register, as you end-up having an extra MMIO read on
each and every interrupt, which can't be great for performance.

> + status = cause & unmask;
> +
> + /* Process legacy INTx interrupts */
> + for (i = 0; i < PCI_NUM_INTX; i++) {
> + if (!(status & PCIE_INT_INTX(i)))
> + continue;
> +
> + if (generic_handle_domain_irq(port->intx_irq_domain, i) == -EINVAL)
> + dev_err_ratelimited(dev, "unexpected INT%c IRQ\n", (char)i+'A');
> + }
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> static int mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> {
> /* Interrupt support on mvebu emulated bridges is not implemented yet */
> @@ -1121,6 +1249,16 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
> port->io_attr = -1;
> }
>
> + /*
> + * Old DT bindings do not contain "intx" interrupt
> + * so do not fail probing driver when interrupt does not exist.
> + */
> + port->intx_irq = of_irq_get_byname(child, "intx");
> + if (port->intx_irq == -EPROBE_DEFER) {
> + ret = port->intx_irq;
> + goto err;
> + }
> +
> reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags);
> if (reset_gpio == -EPROBE_DEFER) {
> ret = reset_gpio;
> @@ -1317,6 +1455,7 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
>
> for (i = 0; i < pcie->nports; i++) {
> struct mvebu_pcie_port *port = &pcie->ports[i];
> + int irq = port->intx_irq;
>
> child = port->dn;
> if (!child)
> @@ -1344,6 +1483,22 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
> continue;
> }
>
> + if (irq > 0) {
> + ret = mvebu_pcie_init_irq_domain(port);
> + if (ret) {
> + dev_err(dev, "%s: cannot init irq domain\n",
> + port->name);
> + pci_bridge_emul_cleanup(&port->bridge);
> + devm_iounmap(dev, port->base);
> + port->base = NULL;
> + mvebu_pcie_powerdown(port);
> + continue;
> + }
> + irq_set_chained_handler_and_data(irq,
> + mvebu_pcie_irq_handler,
> + port);
> + }
> +
> /*
> * PCIe topology exported by mvebu hw is quite complicated. In
> * reality has something like N fully independent host bridges
> @@ -1448,6 +1603,7 @@ static int mvebu_pcie_remove(struct platform_device *pdev)
>
> for (i = 0; i < pcie->nports; i++) {
> struct mvebu_pcie_port *port = &pcie->ports[i];
> + int irq = port->intx_irq;
>
> if (!port->base)
> continue;
> @@ -1458,7 +1614,17 @@ static int mvebu_pcie_remove(struct platform_device *pdev)
> mvebu_writel(port, cmd, PCIE_CMD_OFF);
>
> /* Mask all interrupt sources. */
> - mvebu_writel(port, 0, PCIE_MASK_OFF);
> + mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_UNMASK_OFF);
> +
> + /* Clear all interrupt causes. */
> + mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_CAUSE_OFF);
> +
> + /* Remove IRQ domains. */
> + if (port->intx_irq_domain)
> + irq_domain_remove(port->intx_irq_domain);
> +
> + if (irq > 0)
> + irq_set_chained_handler_and_data(irq, NULL, NULL);
>
> /* Free config space for emulated root bridge. */
> pci_bridge_emul_cleanup(&port->bridge);

Thanks,

M.

--
Without deviation from the norm, progress is not possible.

Next message: Niklas Söderlund: "Re: [PATCH v3] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt"
Previous message: Lad, Prabhakar: "Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt"
In reply to: Pali Rohár: "[PATCH 10/11] PCI: mvebu: Implement support for legacy INTx interrupts"
Next in thread: Pali Rohár: "Re: [PATCH 10/11] PCI: mvebu: Implement support for legacy INTx interrupts"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]