[PATCH] dmaengine: sh: rcar-dmac: Check for error num after setting mask

[Jiasheng Jiang]

Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.

Fixes: dc312349e875 ("dmaengine: rcar-dmac: Widen DMA mask to 40 bits")
Signed-off-by: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
---
 drivers/dma/sh/rcar-dmac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
index 6885b3dcd7a9..79901d0e9fbf 100644
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -1869,7 +1869,9 @@ static int rcar_dmac_probe(struct platform_device *pdev)
 	dmac->dev = &pdev->dev;
 	platform_set_drvdata(pdev, dmac);
 	dma_set_max_seg_size(dmac->dev, RCAR_DMATCR_MASK);
-	dma_set_mask_and_coherent(dmac->dev, DMA_BIT_MASK(40));
+	ret = dma_set_mask_and_coherent(dmac->dev, DMA_BIT_MASK(40));
+	if (ret)
+		return ret;
 
 	ret = rcar_dmac_parse_of(&pdev->dev, dmac);
 	if (ret < 0)
-- 
2.25.1