Re: [syzbot] kernel BUG in pskb_expand_head

From: Marc Kleine-Budde
Date: Wed Jan 05 2022 - 06:44:42 EST


On 19.12.2021 16:19:20, syzbot wrote:
> skb_over_panic net/core/skbuff.c:118 [inline]
> skb_over_panic net/core/skbuff.c:118 [inline] net/core/skbuff.c:1986
> skb_put.cold+0x24/0x24 net/core/skbuff.c:1986 net/core/skbuff.c:1986
> isotp_rcv_cf net/can/isotp.c:570 [inline]
> isotp_rcv_cf net/can/isotp.c:570 [inline] net/can/isotp.c:668
> isotp_rcv+0xa38/0x1e30 net/can/isotp.c:668 net/can/isotp.c:668

> struct tpcon {
> int idx;
> int len;
^^^
> u32 state;
> u8 bs;
> u8 sn;
> u8 ll_dl;
> u8 buf[MAX_MSG_LENGTH + 1];
> };
>
> static int isotp_rcv_ff(struct sock *sk, struct canfd_frame *cf, int ae)
> {

[...]

> /* Check for FF_DL escape sequence supporting 32 bit PDU length */
> if (so->rx.len) {
> ff_pci_sz = FF_PCI_SZ12;
> } else {
> /* FF_DL = 0 => get real length from next 4 bytes */
> so->rx.len = cf->data[ae + 2] << 24;
> so->rx.len += cf->data[ae + 3] << 16;
> so->rx.len += cf->data[ae + 4] << 8;
> so->rx.len += cf->data[ae + 5];
> ff_pci_sz = FF_PCI_SZ32;
> }

Full 32 Bit PDUs don't work with struct tpcon::len being an "int". I
think converting it to "unsigned int" should be done.

[...]

> }
>
> static int isotp_rcv_cf(struct sock *sk, struct canfd_frame *cf, int ae,
> struct sk_buff *skb)
> {
> struct isotp_sock *so = isotp_sk(sk);
> struct sk_buff *nskb;
> int i;
>
> if (so->rx.state != ISOTP_WAIT_DATA)
> return 0;
>
> /* drop if timestamp gap is less than force_rx_stmin nano secs */
> if (so->opt.flags & CAN_ISOTP_FORCE_RXSTMIN) {
> if (ktime_to_ns(ktime_sub(skb->tstamp, so->lastrxcf_tstamp)) <
> so->force_rx_stmin)
> return 0;
>
> so->lastrxcf_tstamp = skb->tstamp;
> }
>
> hrtimer_cancel(&so->rxtimer);
>
> /* CFs are never longer than the FF */
> if (cf->len > so->rx.ll_dl)
> return 1;
>
> /* CFs have usually the LL_DL length */
> if (cf->len < so->rx.ll_dl) {
> /* this is only allowed for the last CF */
> if (so->rx.len - so->rx.idx > so->rx.ll_dl - ae - N_PCI_SZ)
> return 1;
> }
>
> if ((cf->data[ae] & 0x0F) != so->rx.sn) {
> /* wrong sn detected - report 'illegal byte sequence' */
> sk->sk_err = EILSEQ;
> if (!sock_flag(sk, SOCK_DEAD))
> sk_error_report(sk);
>
> /* reset rx state */
> so->rx.state = ISOTP_IDLE;
> return 1;
> }
> so->rx.sn++;
> so->rx.sn %= 16;
>
> for (i = ae + N_PCI_SZ; i < cf->len; i++) {
> so->rx.buf[so->rx.idx++] = cf->data[i];
> if (so->rx.idx >= so->rx.len)
> break;
> }
>
> if (so->rx.idx >= so->rx.len) {
> /* we are done */
> so->rx.state = ISOTP_IDLE;
>
> if ((so->opt.flags & ISOTP_CHECK_PADDING) &&
> check_pad(so, cf, i + 1, so->opt.rxpad_content)) {
> /* malformed PDU - report 'not a data message' */
> sk->sk_err = EBADMSG;
> if (!sock_flag(sk, SOCK_DEAD))
> sk_error_report(sk);
> return 1;
> }
>
> nskb = alloc_skb(so->rx.len, gfp_any());
> if (!nskb)
> return 1;
>
> memcpy(skb_put(nskb, so->rx.len), so->rx.buf,
^^^^^^^
> so->rx.len);

This is where the skb_over_panic() happens.

regards,
Marc

--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

Attachment: signature.asc
Description: PGP signature