Re: [PATCH 1/2] gpio: ts5500: Use platform_get_irq() to get the interrupt

[Bartosz Golaszewski]

On Wed, Dec 22, 2021 at 6:19 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
>
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypassed the hierarchical setup and messed up the
> irq chaining.
>
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq().
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
>  drivers/gpio/gpio-ts5500.c | 11 ++++-------
>  1 file changed, 4 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpio/gpio-ts5500.c b/drivers/gpio/gpio-ts5500.c
> index c91890488402..b159e92a3612 100644
> --- a/drivers/gpio/gpio-ts5500.c
> +++ b/drivers/gpio/gpio-ts5500.c
> @@ -317,22 +317,19 @@ static int ts5500_dio_probe(struct platform_device *pdev)
>         struct device *dev = &pdev->dev;
>         const char *name = dev_name(dev);
>         struct ts5500_priv *priv;
> -       struct resource *res;
>         unsigned long flags;
>         int ret;
>
> -       res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> -       if (!res) {
> -               dev_err(dev, "missing IRQ resource\n");
> -               return -EINVAL;
> -       }
> +       ret = platform_get_irq(pdev, 0);
> +       if (ret < 0)
> +               return ret;
>
>         priv = devm_kzalloc(dev, sizeof(struct ts5500_priv), GFP_KERNEL);
>         if (!priv)
>                 return -ENOMEM;
>
>         platform_set_drvdata(pdev, priv);
> -       priv->hwirq = res->start;
> +       priv->hwirq = ret;
>         spin_lock_init(&priv->lock);
>
>         priv->gpio_chip.owner = THIS_MODULE;
> --
> 2.17.1
>

Applied, thanks!

Bart