Re: [PATCH v4 1/2] Add binding for ti,adc1018. It allows selection of channel as a Device Tree property

[Rob Herring]

On Fri, 31 Dec 2021 13:19:15 +0000, Iain Hunter wrote:
> New binding file uses the adc.yaml to define channel selection
> 
> Signed-off-by: Iain Hunter <drhunter95@xxxxxxxxx>
> ---
>  .../bindings/iio/adc/ti,ads1018.yaml          | 126 ++++++++++++++++++
>  1 file changed, 126 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1018.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/iio/adc/ti,ads1018.example.dts:24.19-31.15: Warning (spi_bus_reg): /example-0/spi/adc@1: SPI bus unit address format error, expected "0"
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/ti,ads1018.example.dt.yaml: adc@1: 'ti,adc-channels' does not match any of the regexes: '^channel@([0-3])$', 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/ti,ads1018.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/ti,ads1018.example.dt.yaml: adc@0: 'ti,adc-diff-channels' does not match any of the regexes: '^channel@([0-3])$', 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/ti,ads1018.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1574373

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.