Re: [PATCH v1 1/1] hwmon : (mr75203) fix wrong power-up delay value

[Guenter Roeck]

On Sun, Dec 19, 2021 at 01:22:39PM +0300, Arseny Demidov wrote:
> In the file mr75203.c we have a macro named POWER_DELAY_CYCLE_256,
> the correct value should be 0x100. The register ip_tmr is expressed
> in units of IP clk cycles, in accordance with the datasheet.
> Typical power-up delays for Temperature Sensor are 256 cycles i.e. 0x100.
> 
> Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
> Signed-off-by: Arseny Demidov <a.demidov@xxxxxxxxx>

Applied.

Thanks,
Guenter

> ---
>  drivers/hwmon/mr75203.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
> index 868243dba1ee..1ba1e3145969 100644
> --- a/drivers/hwmon/mr75203.c
> +++ b/drivers/hwmon/mr75203.c
> @@ -93,7 +93,7 @@
>  #define VM_CH_REQ	BIT(21)
>  
>  #define IP_TMR			0x05
> -#define POWER_DELAY_CYCLE_256	0x80
> +#define POWER_DELAY_CYCLE_256	0x100
>  #define POWER_DELAY_CYCLE_64	0x40
>  
>  #define PVT_POLL_DELAY_US	20