[PATCH 2/2] mmc: jz4740: Support using a bi-directional DMA channel

[Paul Cercueil]

Since the MMC/SD controller in Ingenic SoCs work in half-duplex, it is
possible to use one single DMA channel for both TX and RX operations,
instead of using separate channels.

As some older Ingenic SoCs offer only a handful of DMA channels,
supporting bi-directional channels allow more hardware to use the
channels that would otherwise be used for the MMC/SD operation.

Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
 drivers/mmc/host/jz4740_mmc.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 80a2c270d502..a0b94f61ddcf 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -217,11 +217,23 @@ static void jz4740_mmc_release_dma_channels(struct jz4740_mmc_host *host)
 		return;
 
 	dma_release_channel(host->dma_tx);
-	dma_release_channel(host->dma_rx);
+	if (host->dma_rx)
+		dma_release_channel(host->dma_rx);
 }
 
 static int jz4740_mmc_acquire_dma_channels(struct jz4740_mmc_host *host)
 {
+	struct device *dev = mmc_dev(host->mmc);
+
+	host->dma_tx = dma_request_chan(dev, "tx-rx");
+	if (!IS_ERR(host->dma_tx))
+		return 0;
+
+	if (PTR_ERR(host->dma_tx) != -ENODEV) {
+		dev_err(dev, "Failed to get dma tx-rx channel\n");
+		return PTR_ERR(host->dma_tx);
+	}
+
 	host->dma_tx = dma_request_chan(mmc_dev(host->mmc), "tx");
 	if (IS_ERR(host->dma_tx)) {
 		dev_err(mmc_dev(host->mmc), "Failed to get dma_tx channel\n");
@@ -241,7 +253,10 @@ static int jz4740_mmc_acquire_dma_channels(struct jz4740_mmc_host *host)
 static inline struct dma_chan *jz4740_mmc_get_dma_chan(struct jz4740_mmc_host *host,
 						       struct mmc_data *data)
 {
-	return (data->flags & MMC_DATA_READ) ? host->dma_rx : host->dma_tx;
+	if ((data->flags & MMC_DATA_READ) && host->dma_rx)
+		return host->dma_rx;
+	else
+		return host->dma_tx;
 }
 
 static void jz4740_mmc_dma_unmap(struct jz4740_mmc_host *host,
-- 
2.34.1